Post Buy Requirement
ET
papillion, United States
Add Review

Other Products / Services

Swivel Joints

Swivel Joints: Windlass Engineers & Services manufactures Swivel Joints Which are metallic pipe fittings with integral ball-bearing swivels. Featues include:
Proper rotation and movement without sacrificing strength and integrity of the steel.
Streamlined bore minimizes flow restrictions, turbulence and pressure drop.
Long-sweep swivel joints have extra-long radius elbows for better flow characteristics.
Manufactured specifically for high pressure applications.
Dual and tri-race ball bearing swivel joints are matched to load capacities & service conditions.
All ball races are either flame hardened carburized & hardened or snap-in stainless steel.
All swivel joints are field repairable. Easy to use repair kits are available.
Eight short radious swivel joint style or configurations are available.
End connections are threaded, integral wing union, beveled for welding or flanged.
Sizes available 1 to 3 furnished with high Nitrile packing and brass or stainless steel Seal ring.
All joints are specially heat-treated & inspected for controlled hardness.
All materials meet ASTM andor AISI standards
Sour gas swivel joints are manufactured in accordance with the National Association of Corrosion Engineers (NACE) Standard MR-01-75 & the American Petroleum Institute's (API) Standard RP-14-E.
View Complete Details

Pup Joints & Crossovers

Pup Joints & Crossovers: Windlass Engineers & Services manufactures
.
Pup Joints & Integral Union Connections with Integral, threaded or welded joints.
Sizes from 1 to 4
Pressure ratings 6, 000 PSI to 12, 000 PSI.
All integral products mafactured from forged steel which meets ASTM and or AISI Standards
View Complete Details

Steam Hose

  • Temperature -40°F to +450° F (-40°C to + 230°C)
Alfaflex Wire Reinforced Steam Hose 250 PSI
All steam and hot watersteam applications where superior life, safety and performance are important. Special EPDM cover provides substantially longer service life due to its heat age resistance.

T Black EPDM compound
C Red EPDM compound
R Multiple steel wire cord plies
T.P. -40F to +450 F (-40C to + 230C)
S.F. 10:1
B ALFAFLEX STEAM HOSE 250 - PSI W.P.
* T - Tube, C - Cover, R - Reinforcement, T.P - Temperature, S.F. - Safety Factor, B - Branding.
View Complete Details

Air Hose

  • Temperature -20°F to +180°F (-30° C to + 80°C)
Alfaflex Wire Reinforced Yellow Air Hose 580 PSI
This hose is designed for the most severe working conditions in mining, quarries, industrial and construction service. This mandrel built hose has a high margin of safety and gives a long and trouble free service under the most arduous working conditions.

T Black oil resistant Nitrile (NBR)
C Yellow NR SBR blended compound
R Multiple steel wire cord plies
T.P. -20F to +180F (-30 C to + 80C)
S.F. 3:1
B ALFAFLEX WIRE REINFORCED AIR HOSE 580 - PSI W.P
* T - Tube, C - Cover, R - Reinforcement, T.P - Temperature, S.F. - Safety Factor, B - Branding.
View Complete Details

Flanges

  • Material Designation 36K
  • Yield Strength 2% Offset Min. No.(MPa/ PSI) 248, 36, 000
  • Elongation in 50mm Min. 21
Flanges, Tees & Crosses: Windlass Engineers & Services manufactures flow line productFlanges
Tees And Crosses
Double Studded Adapter Flanges
Spools- Drilling, Adapter & Spacer.
Hub Connections
Clamps
Top Connectors
Bull Plugs
These products are supplied as per customer requirements of PSL levels, material class and temperature class. These items are supplied with full material traceability documents.
s under API License 6A and 16A.
View Complete Details

Ring Joint Gaskets

  • Material Soft Iron
  • Max. Hardness No.(Brinell/ Rockwell B) 90, 56
  • Identification D
RING JOINT GASKETS Windlass Engineers & Services has API 16A license to manufature Ring Joint Gaskets in different solid metal type includeing soft iron, low carbon steel, stainless steel 304316324 and other alloys. These gaskets are made to withstand high pressure, various temperatures, and employed where corrosive agents are present.

Suitable for oil and gas pipeline flages, pressure vessels, and hihg speed joint faces.
Style R is divided into various types.
Style RX is an improvement of style R in pressure resistance.
Style BX is a gasket with high pressure resistance up to 15, 000 PSI.
Made to conform to API6A & ASMEB16, 20 standard.
R - Oval Type
Standard ring joint gasket with oval cross section and designed for flanges with standard ring joint grooves. Available from R11 to R79 & R92
R - Octagonal Type
Standard ring joint gasket with octagonal Type cross section and designed for flanges with standard ring joint grooves. Interchangeable with oval section gaskets on modern octagonal grooved flanges. Available from R11 to R105.
RX -Type
An adaptation of the standard R type gasket and designed to fit the same groove design. It is interchangeable with standard R type gaskets. Available from RX20 to RX215.
BX- Type
Specially designed for very high pressures. All BX gaskets incorporate a pressure balance hole to ensure equalization of pressure which may get trapped in the grooves. It is only suited for API BX flanges and grooves. Available from BX150 to BX303.
View Complete Details

HAMMER-UNIONS

HAMMER-UNIONS: Engineers & services offers a wide range of standard and sour gas Hammer Unions. Each is carefully inspected to assure long, dependable service in the most extreme conditions.
Three lug nuts and self-locking ACME threads provide quicemake-up and break-out.
Color coded for quick identification.
Unique identification for sour gas unions.
Some include elastomer seal depending on size, pressure rating and style.
Meet or exceed National Association of Corrosion Engineers standard NACE MR-01-75 and API RP-14E.
All materials used meet ASTM andor AISI standards.
All unions provide pressure-tight & positive sealing for low-pressure services (1, 000 to 2, 000 PSI).
The spherical surface male sub and angular surface female sub form a metal-to-metal seal, the ball and tangent provides a perfect seal.
Range from 1 to 12 with cold working pressures from 1, 000 to 20, 000 PSI.
View Complete Details

DD Couplings

  • Materials Aluminium, Brass/Gunmetal, Stainless Steel, Hastelloy C and PEEK. Other materials on request.
Mann Tek Dry Disconnect Couplings are used for handling and transfer of liquids, gases and bulk powder in an economical, safe and environmental friendly way.Dry Disconnect Couplings are available in sizes from 34 up to 6 and in a wide range of materials and seals to be the given choice for almost any application.
The self sealing design of the couplings guarantees both the highest level of safety and also the quickest way of connecting and disconnecting.
Size:
The couplings are available with BSP- and NPTthreads in sizes 34" (DN 20) to 6" (DN 150). Other threads are available on request (S60X6, Acme etc.).The tank units and Hose units are also available in flanged connections (DIN, ANSI, TW, TTMA, EN 1092-1:2001).
Materials:
Aluminium, BrassGunmetal, Stainless Steel, Hastelloy C and PEEK. Other materials on request.
Seals:
FPM (Viton), EPDM, Chemraz, Kalrez, NBR (Nitrile). Other materials on request.
Maximum Working pressure:
MWP PN 10 16 25.
MAWP 150 300 psi
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Attisso Messan (emmanuel trading)
  • , papillion, United States
  • Share us via