Manufacturer / Exporter / Supplier Of GPS Preamplifiers, RF Fiber Optic Link, Lightning Arrestor, GPS Splitter, Gps Antenna, Digital Wall Clocks, CDMA Timing Module, CDMA Preamplifiers, Frequency Distribution Chassis
Mount this Digital Wall Clock in your data center or office. It keeps perfect time and the 4-inch numbers are easily visible from over 150 feet away. The Digital Wall Clock gets its time updates automatically over the network using NTP (Network Time Protocol).
Our High-Performance Frequency Distribution Chassis is a ten-channel, RF distribution amplifier in a 1U rackmount chassis. It provides ten copies of an input signal and has state-of-the-art isolation and phase-noise performance. Fault sensing of signal levels is provided on all inputs and outputs, and fault status is easily visible via front-panel LED indicators.
The smart GPS Splitter is a one-input, two-output device. In the normal configuration, one of the splitter RF outputs (J1) passes DC from the connected GPS receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitter amplifier. The other RF output (J2) is DC loaded with a 200-ohm resistor to simulate the antenna current draw.
This high-precision antenna is shipped with all GPS-Synchronized Time Servers and Time & Frequency Standards. It provides 40 dB of gain with very high out-of-band rejection performance. Selected specifically for its excellent group delay flatness and unit-to-unit repeatability, the quality of this antenna is critical to delivering 10 ns level time transfer from the Meridian II.
The Lightning Arrestor helps protect your GPS installation from damage due to lightning strikes. It is installed between the antenna and the receiver, where the cable enters the building. It is designed to pass the DC voltage that is needed to power the antenna andor preamps without degrading the GPS signal.
Share your thoughts with other customers for ENDRUN TECHNOLOGIES, LLC
Add Review
