ETP Inc.

The type of fabric used and the specifications of the cover differ depending on the material to be contained. The tank cover may float on the surface of the material in the tank, fluctuating and remaining in contact with the fluid level in the tank. The cover may be suspended over the material in the tank, or may be inflated by collected gases. The ETP Floating Cover is a system that allows for relatively easy deployment, uses proven materials, allows for economy of scale in manufacture, and incorporates the experience from having manufactured many different collection systems. The Floating Covers feature: • A skirt on all four sides which eliminates the need to tie the collection system to the berm. • A modular design which allows for multiple units to be used together. By making each cover in a size that is not too large for easy handling, costly installation crews can be eliminated. • The XR-5 cover is a proven material for bio-gas collection. It is strong, tough, and it is highly resistant to bio-gases. Its low gas permeability makes it ideal for the collection of biogases and for use as a float cover material. • Poly log floats are used to float the cover and to form passageways for the collection of the biogas. • These floats are in sealed sleeves of the XR-5 material. They are permanently fastened to the underside of the cover at the time of installation. • Rainwater drainage is provided by the use of thru-cover drains. By extending the drains to the same depth as the skirts, gas loss is prevented. They also function as a pressure relief device in the event the cover ever has excessive pressure under it. • Bio-gas collection is provided by the gas pick up points which allow the gas to move to the manifold. These pick up points are welded to the cover using the same technology used to weld the seams. • The cover's unique design allows it to act as a gas storage container at times of peak production, and will level out the gas productiondemand cycle. • The tie-down points are provided around the cover's perimeter to allow for easy installation and placement.

ETP's Floating Baffle Curtain is a custom, prefabricated floating hydraulic barrier curtain manufactured to create individual "cells" in an existing pond. This allows existing aerators to be used more efficiently; to improve retention time, to improve settling time and the elimination of "short circuiting" in your wastewater treatment pond. The Benefits you will receive from the Floating Baffle Curtain: Direct Water Flow For Improved Efficiency Minimized Short Circuiting Prevention of Channeling Longer Contract Time Improved Mixing ncreased Retention Time ETP's Floating Baffle Curtain may offer an inexpensive solution to your current pond problem. By installing ETP's floating baffle curtain, an older pond can work more efficiently. Every bit of surface area can be used without the loss of any volume. ETP's Floating Baffle Curtain is manufactured using only high quality fabrics. The fabrication of the floating baffle curtain is accomplished with a thermal sealing process which eliminates the need for sewn seams which could deteriorate over time. Our Floating Baffle Curtain is designed to fit your specific needs, curves and various bottom contours. Flaps and other special features can be built in. Special materials can be used, depending on the chemical resistance desired. ETP's Floating Baffle Curtain is easy to install and can be put into operation rapidly without costly equipment or expensive labor charges. The floating and flexible design allows the floating baffle curtain to adjust to changing fluid levels. We believe you will receive superior performance and value with ETP's Floating Baffle Curtain System. Our quality approach has attracted hundreds of customers ranging from small municipalities to Fortune 500 corporations. Allow us to apply our expertise in thermoplastic fabrication and system manufacturing to your application.

A skirt on all four sides which eliminates the need to tie the collection system to the berm. • A modular design which allows for multiple units to be used together. By making each cover in a size that is not too large for easy handling, costly installation crews can be eliminated. • The XR-5 cover is a proven material for bio-gas collection. It is strong, tough and it is highly resistant to bio-gases. Its low gas permeability makes it ideal for the collection of bio-gases and for use as a float cover material. • Poly log floats are used to float the cover and to form passageways for the collection of the bio-gas. These floats are in sealed sleeves of the XR-5 material, and are permanently fastened to the underside of the cover at the time of installation. • Rainwater drainage is provided by the use of thru-cover drains. By extending the drains to the same depth as the skirts, gas loss is prevented. They also function as a pressure relief device in the event the cover ever has excessive pressure under it. • Bio-gas collection is provided by the gas pick up points which allow the gas to move to the manifold. These pick up points are welded to the cover using the same technology used to weld the seams. • The cover's unique design allows it to act as a gas storage container at times of peak production, and will level out the gas productiondemand cycle. • The tie-down points are provided around the cover's perimeter to allow for easy installation and placement. All metals used are stainless steel. • Covers are custom made and can be almost any size.