Post Buy Requirement
EC
United States
Add Review

Our Products

  1. Electronic Components 4 Products available
  2. Hydraulic & Pneumatic Tools 8 Products available
  3. Winter Clothing & Accessories 3 Products available
  4. Industrial & Engineering Products 4 Products available
  5. Sewing Accessories 9 Products available
  6. Others 52 Products available

Other Products / Services

COUPLING KIT

  • Model Number 9046
  • Quantity 1
Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number.
View Complete Details

Mounting Kit

  • Model 9047
  • Quantity 1
Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number.
View Complete Details

COUPLING KIT

  • Model Number 900394
  • Quantity 1
Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number.
View Complete Details

SUPER AIR AMPLIFIER SHIM SET

  • Qty 1
Super Air Amplifiers under 8" (203mm) are supplied with a .003" (0.08mm) slotted air gap which is ideal for most applications. The Model 120028 8" (203mm) Super Air Amplifier is supplied with a .009" (0.23mm) air gap. Flow and force can be increased by replacing the shim with a thicker .006" (0.15mm) or .009" (0.23mm) shim. Super Air Amplifier Shim Sets include (1) .006" (0.15mm) and (1) .009" (0.23mm) stainless steel shim (except Model 120028, which also includes (1) .015" (0.39mm) stainless steel shim).
View Complete Details

Tee Fittings

  • Country of Origin India
  • Material Steel
  • Thickness 60-80mm
  • Feature Flexible
  • Technics Molding
  • Type Tee Fittings
  • Diameter 50-75mm
  • Shape Tee Shape
  • Finishing Coated
  • Quantity 1

TEES T-shaped fittings to connect three lengths of pipe in the same plane with one length at right angles to the other two.

View Complete Details

Couplers

  • Quantity 1
COUPLERS
These female thread couplers allow two male threaded pipes to be joined together.
Quantity 1
View Complete Details

CROSS, BRASS

  • Quantity 1
CROSS, BRASS
A fitting used to connect four lengths of pipe in the same plane with all lengths at right angles to each other.
View Complete Details

Hex Nipples

  • Quantity 1
HEX NIPPLES
These short pieces of pipe with male threads at each end are used to connect two other fittings, with an added hex used to aid with installation.
View Complete Details

Manual Valves

  • Quantity 1
MANUAL VALVES
Manual quarter turn ball valves are available from 14 NPT through 1-14 NPT. (Manual mini valve is 38 MNPT x 38 FNPT)
View Complete Details

Compressed Air Hose

  • Quantity 1
COMPRESSED AIR HOSE - 12" INSIDE DIAMETER
Compressed air hose is made of reinforced synthetic rubber to assure long life and protection against ozone, weathering, and temperatures up to 158F (70C). Includes a 12 NPT male brass fitting on each end and is 12" inside diameter. Hose lengths are 10', 20', 30', 40' and 50'. Indicate the length with a dash. Example: A Model 901179-30 is 12" ID Hose x 30' long.
View Complete Details

Thermostat

  • Model 9017
  • Quantity 1
The adjustable thermostat used with Cabinet Cooler Systems is factory set at 95F (35C). It will normally hold 2F (1C) of the desired temperature setting. It is rated 24V-240V AC or DC, 5060 Hz and is UL Recognized, CSA Certified.
View Complete Details

FILTER MOUNTING BRACKET

  • Model 900395
  • Quantity 1
Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number.
View Complete Details

Line Vacs

Line Vacs - uses a small amount of compressed air to convert ordinary pipe, hose, or tube into a long distance conveyor.

No moving parts to clog or maintain
Ideal for hopper loading, fiber tensioning, trim removal, and material transfer
Available in aluminum and stainless steel for hygenic applications
Complies with OSHA noise and pressure standards
View Complete Details

Threaded Line Vacs

Threaded Line Vacs - provides the same outstanding performance as the Line Vac with the added benefit of common threaded fastening. The standard threading allows easy attachment to common plumbing pipe and fittings.

No moving parts to clog or maintain
Ideal for hopper loading, fiber tensioning, trim removal, and material transfer
Easily attaches to ordinary pipe and fittings that can be found at hardware stores.
Available in aluminum and durable stainless steel
View Complete Details

Heavy Duty Line Vacs

Heavy Duty Line Vacs - are engineered to provide even higher performance than EXAIR's standard Line Vacs. Its hardened construction resists wear from the toughest materials and the increased output allows higher volumes of material to be transported over longer horizontal and vertical distances.

More than 50% higher throughput than standard Line Vacs
Ideal for transport of tougher materials
Available in hardened alloy
View Complete Details

Heavy Duty Threaded Line Vacs

Heavy Duty Threaded Line Vacs - provide the same powerful performance as EXAIR's Heavy Duty Line Vacs with the added benefit of common threaded attachments. The standard threading allows easy attachment to common plumbing pipe and fittings.

More than 50% higher throughput than standard Line Vacs
Easily attaches to ordinary pipe and fittings that can be found at hardware stores.
Ideal for transport of tougher materials
Available in hardened alloy
View Complete Details

Sanitary Flange Line Vacs

Sanitary Flange Line Vacs - are engineered to effectively convey large volumes of material over long distances in environments where frequent disassembly and cleanup is required.

ISO 2852 compatible
Fits standard sanitary flanges
Corrosion resistant type 316 stainless steel
View Complete Details

Light Duty Line Vacs

Light Duty Line Vacs - are engineered to effectively convey small volumes of material over short distances. The simplified design is sized to fit standard hose or tubing.

Lower throughput than the standard Line Vac
Simplified design provides effective conveying at a lower cost
Available in aluminum.
View Complete Details

Air Jets

Air Jets - produces a powerful, directed airstream that's ideal for part ejection or reaching hard-to-reach areas.

Entrains a large volume of air to supplement supplied air
Available in brass and Type 303 stainless steel
Meets OSHA noise and pressure requirements
View Complete Details

SUPER AIR KNIFE COUPLING BRACKET KIT

SUPER AIR KNIFE COUPLING BRACKET KIT
Some applications require a Super Air Knife that is longer than our 108" (2743mm) length. Coupling Bracket Kits that join two Super Air Knives together are available. They are also used to join shorter length knives over a wide span where independent control of each knife is desirable. The kit includes two rigid plates along with the assembly screws. The bottom plate is supplied with a hole to access the bottom compressed air inlets. All models include stainless steel screws.
View Complete Details

EXTENSION PIPE ASSEMBLY

EXTENSION PIPE ASSEMBLY
EXAIR's Aluminum Extension Pipes extend the reach of Super Blast Safety Air Guns. Available in 3' (914mm) and 6' (1, 829mm) lengths.
View Complete Details

Replacement Filter Elements

  • Qty 1
REPLACEMENT FILTER ELEMENTS
Replacement filter elements for EXAIR's water-dirt filter separators and oil removal filters
View Complete Details

CHIP SHIELD

  • Quantity 1
EXAIR's Chip Shields are a durable polycarbonate shield that protects operators from flying debris often associated with blowing chips off machined parts. Chip Shields are also great for keeping coolant from spreading everywhere during drying operations. EXAIR's Chip Shields help meet the requirements of OSHA 1910.242(b) for safe use of compressed air. Chip Shields are available for EXAIR's Precision Safety Air Gun, VariBlast Compact Safety Air Gun, Soft Grip Safety Air Gun and Heavy Duty Safety Air Gun. Chip Shields can be used on Safety Air Guns with or without an Aluminum Extension. Chip Shields are not for use on guns that use a Stay Set Hose.
View Complete Details

Rebuild Kit

  • Model Number 9001
  • Quantity 1
REBUILD KIT FOR MODEL 9001 AND 9032 FILTER SEPARATOR
Rebuild kits for FilterSeparators include the filter bowl with auto-drain, filter retaining nut, water separator vane assembly, and o-ring for filter bowl. Rebuild kits for Pressure Regulators include lower housing, pressure adjustment shaft, spring, plunger, pressure plate and assembly screws.
View Complete Details

PRESSURE REGULATOR MOUNTING BRACKET

  • Quantity 1
Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number.
View Complete Details

COMPRESSED AIR HOSE INSIDE DIAMETER

  • Quantity 1
Compressed air hose is made of reinforced synthetic rubber to assure long life and protection against ozone, weathering, and temperatures up to 158F (70C). Includes a 14 NPT male brass fitting on each end and is 38" inside diameter. Hose lengths are 10', 20', 30', 40' and 50'. Indicate the length with a dash. Example: A Model 900061-30 is 38" ID Hose x 30' long.
View Complete Details

COUPLING KITS

Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number.
View Complete Details

Close Nipples

  • Quantity 1
CLOSE NIPPLES
These short pieces of pipe with male threads at each end are used to connect two other fittings.
View Complete Details

AUTOMATIC DRAIN FILTER SEPARATOR

  • Quantity 1
EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging the compressed air products. A Filter Separator should be installed prior to an oil removal filter, pressure regulator or valve. All but one model feature an automatic drain which empties accumulated liquid and debris from the bowl with a float mechanism.
View Complete Details

GALLON RECEIVER TANK

  • Model 9500-60 60
  • Quantity 1
Some applications require an intermittent demand for a high volume of compressed air. This can cause fluctuations in pressure and volume throughout the compressed air system with some points being "starved" for compressed air. EXAIR's Model 9500-60 60 Gallon Receiver Tank can be installed near the point of high demand so there is an additional supply of compressed air available for a short duration. The time between the high volume demand occurrences should be long enough so the compressor has enough time to replenish the receiver tank.
View Complete Details

Swivel Fittings

  • Quantity 1
EXAIR's Swivel Fittings make it easy to adjust the position of the Air Nozzles, Air Jets and Air Amplifiers. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees
View Complete Details

SUPER AIR KNIFE KIT

EXAIR's Super Air Knife, the most efficient compressed air knife on the market, is engineered to dramatically reduce compressed air usage while entraining ambient air at a ratio of 40:1. Noise levels are greatly reduced when compared to other blowoffs. EXAIR Super Air Knife Kits include a Super Air Knife, shim set, filter separator and pressure regulator (with coupler).
View Complete Details

SUPER AIR KNIFE KIT WITH PLUMBING KIT

SUPER AIR KNIFE KIT WITH PLUMBING KIT
EXAIR's Super Air Knife Kits with Plumbing Kit Installed include a Super Air Knife with assembled plumbing kit, shim set, filter separator and pressure regulator (with coupler).
View Complete Details

SUPER AIR KNIFE DELUXE KIT

SUPER AIR KNIFE DELUXE KIT
EXAIR's Super Air Knife is the most efficient compressed air knife on the market. It is engineered to dramatically reduce compressed air usage while entraining ambient air at a ratio of 40:1. Noise levels are greatly reduced when compared to other blowoffs. EXAIR's Deluxe Super Air Knife Kits include a Super Air Knife, EFC (Electronic Flow Control), Universal Air Knife Mounting System, shim set, filter separator and pressure regulator (with coupler).
View Complete Details

AIR KNIFE PLUMBING KIT

AIR KNIFE PLUMBING KIT FOR STAINLESS STEEL SUPER AIR KNIVES
Super Air Knife
Super Air Knife video
Stainless Steel Super Air Knives that are 24" or longer must be supplied with compressed air at multiple inlets on the knife to ensure even airflow. Air Knife Plumbing Kits eliminate the need to search for the right fittings and ensure that you are using properly sized air supply lines. The Kits include compressed air pipe of the proper diameter and length plus fittings to interconnect the bottom or end compressed air inlets for best performance. Plumbing kits for stainless steel Super Air Knives include cut to length type 316 stainless steel pipe and fittings and will also work on PVDF Super Air Knives.
View Complete Details

FULL-FLOW AIR KNIFE KIT

The Full-Flow Air Knife is engineered like our original Standard Air Knife with the added benefit of an airflow across its entire length. They also provide the smallest footprint of our Air Knife line to fit in cramped machine spaces. Full-Flow Air Knife Kits include a Full Flow Air Knife, shim set, filter separator and pressure regulator (with coupler).
View Complete Details

FULL-FLOW AIR KNIFE DELUXE KIT

The Full-Flow Air Knife is engineered like our original standard air knife with the added benefit of an airflow across its entire length. They also provide the smallest footprint of our Air Knife line to fit in cramped machine spaces. Deluxe Kits include a Full-Flow Air Knife, EFC (Electronic Flow Control), Universal Air Knife Mounting System, shim set, filter separator and pressure regulator (with coupler).
View Complete Details

SUPER AIR WIPE KIT

SUPER AIR WIPE KIT
EXAIR's Super Air Wipe provides a uniform 360 airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire and more. Kits include a Super Air Wipe, shim set, filter separator and pressure regulator (with coupler).
View Complete Details

SUPER AIR WIPE SHIM SET

SUPER AIR WIPE SHIM SET
On a Super Air Wipe, compressed air exhausts through a gap which is set with a shim positioned between the cap and the body. Force and flow may be easily increased by adding shims to open the gap. Shim sets are included with all kits or can be purchased separately.
View Complete Details

STANDARD AIR WIPE KIT

STANDARD AIR WIPE KIT
EXAIR's Standard Air Wipe provides a uniform 360 airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose and more. It is a good choice when the added durability of stainless steel screws, shims and hose are not required.
View Complete Details

STANDARD AIR WIPE SHIM SET

STANDARD AIR WIPE SHIM SET
On a Standard Air Wipe, compressed air exhausts through a gap which is set with a shim positioned between the cap and the body. Force and flow may be easily increased by adding shims to open the gap.
View Complete Details

MANUAL DRAIN FILTER SEPARATORS

  • Qty 1
EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging the compressed air products. A Filter Separator should be installed prior to an oil removal filter, pressure regulator or valve. All but one model feature an automatic drain which empties accumulated liquid and debris from the bowl with a float mechanism.
View Complete Details

Oil Removal Filters

  • Quantity 1
EXAIR's Model 9027, 9005, 9006 and 9010 Oil Removal Filters remove oil and solid particulate that is typical of many compressed air systems. A 0.03 micron element is used to trap submicron particles. An internal float automatically activates the drain when full.
View Complete Details

Pressure Regulators

  • Quantity 1
EXAIR's Pressure Regulators permit easy selection of an operating pressure that will allow the air product to work properly without using excessive amounts of compressed air.
View Complete Details

Drum Dollies

  • Quantity 1
Drum Dollies are available for 5, 30, 55 and 110 gallon drums. If your application may require moving your vacuum around the plant, these dollies are rugged and will make moving the vacuum systems from place to place easy.
View Complete Details

Magnetic Bases

  • Quantity 1
Magnetic bases are suited to applications where frequent movement of the air product is required. The powerful magnet permits horizontal or vertical mounting. A valve is provided that can be used to vary the force and flow.
View Complete Details

Solenoid Valves

  • Quantity 1
EXAIR's normally closed Solenoid Valves are available in a variety of flow rates and voltages. All models are UL Listed and are CE and RoHS compliant.
View Complete Details

SUPER AIR KNIFE SHIM SET

SUPER AIR KNIFE SHIM SET
A gap in the Super Air Knife set the force and flow of compressed air. This gap can be adjusted with a shim. Shim sets are available for aluminum, stainless steel, and PVDF Super Air Knives. Super Air Knife kits include a shim set.
View Complete Details

FULL-FLOW AIR KNIFE SHIM SET

FULL-FLOW AIR KNIFE SHIM SET
Force and flow through the Full-Flow Air Knife may be easily adjusted by changing shims. Plastic shim sets are available for aluminum Full-Flow Air Knives and stainless shims are available for stainless steel Full-Flow Air Knives.
View Complete Details

Super Air Wipe

SUPER AIR WIPE
EXAIR's Super Air Wipe provides a uniform 360 airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire and more. The split design offers easy clamping around the surface of the material moving through it, eliminating the need for threading.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Exair Corporation)
  • Cincinnati, OH 45249-1621 map, United States
  • Share us via