Our Products #4956844

Fabreekas vibration and shock isolation materials can be supplied in the form of sheets, cut pads, washers and bushings for OEM applications. The properties of our products are specifically designed for the reduction of impact shock, vibration isolation and structure-borne noise reduction.

Since 1936, Fabreeka has worked with original equipment manufacturers in a variety of industries and applications where absorption of impact shock and isolation of transmitted vibration is desired.

DIMFAB 280 is manufactured using a specific elastomeric compound that is designed to meet the MIL-D-24709 specification for Distributed Isolation Material (DIM). DIMFAB 280 is primarily used by the US Navy for vibration isolation applications in submarines and surface ships.

Fabreeka pad is the original fabric reinforced, elastomeric pad developed in 1936. The properties of the Fabreeka pad are exceptionally suited for the reduction of impact shock.

Fabreeka pad has been used for over 70 years for mounting heavy machinery where absorption of impact shock and isolation of transmitted vibration is desired. Fabreeka pad prevents cracking and flaking of concrete, eliminates the need for grout and prolongs the life of both machines and structures. Fabreeka pad is scientifically constructed to give years of service under the most severe operating conditions.

Fabsorb material absorbs machine-induced energy, limits the transmission of higher frequency disturbances and provides isolation from ambient and induced shock and vibration, which otherwise would affect the accuracy of the machine being installed.

Fabsorb material is specifically designed for vibration isolation applications of support foundations for machine tools, shock testing equipment, grinders and similar equipment.

Fabreeka bearing pad is the original fabric reinforced, elastomeric bearing pad developed in 1936. Fabreeka pad is used to eliminate concrete spalling by compensating for construction irregularities such as rotation and non-parallel load bearing surfaces. Fabreeka bearing pad also prevents electrolytic action between dissimilar materials in construction. The preformed bearing pads can also be provided with a Teflon surface for use in expansion bearings and pipe slides. Fabreeka pad is scientifically constructed to give years of service under the most severe operating conditions.

Fabreeka structural expansion bearings, or slide bearings, accommodate thermal expansion and structural rotation in buildings, bridges and pipe supports. Fabreeka designs and manufactures four types of expansion slide bearings for a wide range of applications. The expansion bearings are supplied as an upper and lower unit prepared to be tack or stitch welded in the field.

For proper bearing design, several questions must be answered. Please download and fill out our expansion bearing questionnaire, or contact us with the following information:

The maximum available bearing area depth, width and height.
The maximum expansion expected and in which direction.
The maximum load on each bearing.
The maximum beam rotation in radians at the bearing area.
If any slotsholes are required, a bolt pattern must be supplied.

Fabreeka crane rail pad is manufactured in two types to accommodate either light or moderate to heavy crane service duty. Both types of crane rail pad have been designed to provide a significant reduction in beam and rail stress while improving wheel load distribution to reduce rail maintenance. The unique LTP surface allows the rail to contract and expand, improving the lateral rigidity and wear resistance of the pad under high service loads.

Fabreeka-PTFE bearing pad is comprised of the original fabric reinforced, elastomeric pad developed in 1936. Fabreeka-PTFE pad is used to accommodate construction irregularities such as rotation and non-parallel load bearing surfaces, while also providing a sliding surface to accommodate expansion. The Fabreeka-PTFE bearing pads are manufactured with a Teflon surface for use in expansion bearings and pipe slides. Fabreeka pad is scientifically constructed to give years of service under the most severe operating conditions.

Fabreeka-PTFE pad can be used in structural expansion bearings, slide bearings, pipe clamps and as pipe support pads.

Fabcel Lev-L leveling mounts provide adjustable leveling and moderate vibration control for all types of equipment and machinery. The original Lev-L mount was first manufactured in 1962 to provide a leveling feature for equipment requiring vibration isolation with the Fabcel pad. The Fabcel Lev-L mount is supplied with a separate leveling bolt to accommodate all types of installations

Isolation washers and Fabreeka bushings are used to eliminate metal-to-metal contact and break the vibration or shock transmission path. For example, the contact between a machine base and an anchor bolt as shown.

Washers & bushings are typically used in conjunction with Fabreeka pads or Fabcel pads where the reduction of impact shock or isolation of transmitted vibration is required