Other Products / Services #5141324

Barrel Nuts, Barrel Nut Retainers and Barrel Nut Tandems Supplier
Fastener Dimension, INC. is proud to announce that we are now stocking Shur-Lok brand Barrel Nuts, Barrel Nut Retainers and Barrel Nut Tandems. The Barrel nut is used in high-tensile applications, securing heavy structural members to the fuselage. These heavy members can consist of but not limited to hanging aircraft engines or attaching wings or tails to the fuselage. They can also be used in attaching the landing gear and wing tips. By using these barrel nuts, you will minimize drilling and eliminate the need for long expensive bolts when attaching these heavy structures. Barrel Nuts are available in advanced aerospace alloys, Floating or fixed (non-floating) nut location in the carriage, metallic or non-metallic materials.

The Barrel Nut Retainers are to assist in easy bolt installation to the barrel nut. These products are available in high strength aerospace alloys, metallic locking and non-metallic rings. These retainers can be used on both floating and non-floating Barrel Nuts.

Barrel nut tandems are also available for easy installation, these tandems come with spreaders that articulate and have attached retainers or lanyards.

For further information, please contact your Fastener Dimensions, Inc. sales Representative. For your convenience; if your part numbers is known, use our R.F.Q form on our website.

We look forward to hearing from you,

Darryl A. Hinkle

Advanced composite fasteners for fiber reinforced panels
Fastener Dimensions, INC. is now stocking Shur-Lok Brand Fasteners for Advanced Composites we all know that in most cases fiber-reinforced advanced composites are stronger than metallic structures. The problem is they do not respond well to localize concentrated loading. The problems they were faced with consist of galvanic compatibility, interference fit, hold edge crushing, vibrations, and water absorption. Shur-Loks solution to address this issue is the design of three types of special fasteners. . The types: bonded-on, bonded mechanical and nonmetallic potted-in. The bonded-on type includes studs and insert plates supplied with pre-attached thermoplastic adhesive. The adhesive is melted by applying heat to the fastener. The bonded mechanical type uses a combination of adhesive and mechanical means for retention in the structure. The nonmetallic inserts and spacers (sleeves and plugs) are primarily designed for sandwich structure. The primary material is polyetherimide which is non-reactive with current composites and is very lightweight.

For further information, please contact your Fastener Dimensions sales representative. For you convince, if your part numbers is known, feel free to use our website to send in your R.F.Q.

Thank you very much; we look forward to hearing from you soon,

Darryl A. Hinkle President

Hex Head Bolts are available in many different sizes, materials, diameters and head configurations. Part number types usually consist of AN, NAS, MS, NASM, AS, HS, SS and BACB. Fastener Dimensions has the ability to make any of the Hex Head Bolts on this page if theyre not already in stock, ready to ship today. If you do not see the part number series on this page call us today.

Custom Hex head bolts are very common in the industries we serve. For more information on custom fastener manufacturing please see the custom bolts to print section.

Fastener Dimensions, Inc. can be your reliable source for all of your Fasteners. We are both a Manufacturer and Distributor of over 150, 000 different products for the Aircraft, Aerospace, Military, Defense, Medical, Transportation, Rail, Space and Racing Industries. We have produced both Production and R & D parts for some of the most prime aircraft manufacturers in the world. In fact, we are one of the most prominent NASM Bolt Manufacturers in the country.

We also offer Internal Wrenching Bolts, External Wrenching Bolts, Spline Heads, Socket Caps, Hex Heads, 12 Point Bolts, Tulip heads, Pan Heads, Flat Heads and Custom Bolts to your blueprint. If your Head Configuration is not listed, please see the Bolt and Screw Head Styles section on our website, or call us today.

Internal Wrenching Bolts, Socket Caps, Socket Head Cap Screws, Tulip Heads, Socket Head Shoulder Screws and more.

Internal Wrenching Bolts are available in many different sizes, materials, diameters and head configurations. Part number types usually consist of AN, NAS, MS, NASM, AS, HS, SS and BACB. Fastener Dimensions has the ability to make any of Internal Wrenching Bolts on this page if theyre not already in stock, ready to ship today. If you do not see the part number series on this page call us today.

Custom Internal Wrenching Bolts are very common in the industries we serve. For more information on custom fastener manufacturing please see the custom bolts to print section.

Fastener Dimensions, INC. can be your reliable source for all of your fasteners. We are both a manufacturer and distributor of over 150, 000 different products for the Aircraft, Aerospace, Military and Defense, Medical, Transportation, Rail, Space and Racing Industries. We have produced both production and R & D parts for some of the most prime aircraft manufacturers in the world.

We also offer Internal wrenching bolts, External wrenching bolts, Spline heads, Socket caps, Hex heads, 12 Point bolts, Tulip heads, Pan Heads, flat heads and custom bolts to your blue print. If your head configuration is not listed, please see the bolt and screw head styles section on our website, or call us today.

Aircraft Screws are available in many different sizes, materials, diameters, drives and head configurations. Part number types usually consist of AN, NAS, MS, NASM, AS, HS, SS Part Numbers. Fastener Dimensions has the ability to make or stock any of the Aircraft Screws as can be seen on the page. If you do not see the part number series on the page, call us today. In fact, we're one of the largest suppliers of NAS Screws in the country.

Custom Aircraft Grade Screws are very common in the industries we serve. For more information on Custom Fastener Manufacturing, please see information about the Custom Screws in the section.

Fastener Dimensions, Inc. can be your reliable source of all information related to Fasteners. We are both a Manufacturer and Distributor of over 150, 000 different products for the Aircraft, Aerospace, Military, Defense, Medical, Transportation, Rail, Space and Racing Industries. We have produced both production and R & D parts for some of the most prime aircraft manufacturers in the world.


Fastener Dimensions, Inc.

Fastening the world one bolt at a time,

Our experience is your solution!

Call us today,

(P) 718-989-1914 (Option 1)

(F) 718-847-8414

Ringlock Studs - Inserts

Ring Lock Studs - Inserts - RingsFeatures; Weight saving and provides high resistance to torquw-out and pullout when used in conjunction with serrated lock ring driven into parent material. Interference fit stud end threads provide excellent performance in high fatiguehigh vibration applications.

Applications; Utilized in soft and hard materials found in gear boxes, engines, pumps and vehicles in general.

Configuration; Shear, Lightweight, Heavy Duty

Materials; 4130 Alloy Steel, 303 Stainless, 17-4 PH, Alloy 718 (INCONEL(TM) 718), 6A1-4V Titanium

Sizes; #10 through 1 inch, 5mm-12mm

Standards: MS51551, AS51992, AS51989, MS51991, MS51993
Nut End Threads; UNJC, UNJF, Metric

Finishes; Cadmium, Per QQ-P-416 Type II, Class 3, Passivated per ASTM A380 and Anodic coating per AMS 2488, Type 2

Performance; NASM45909, MIL-I-45910

Floating Inserts

Floating Inserts-Fastener DimensionsFeatures - Automatically compensates for misalignment of mating holes. Useful on curved surfaces.

Materials - 303 CRES, A-286 Alloy Steel

Sizes - Internal thread, sizes from #8 through 12in.

Standards - AS8879

Finishes - 303CRES passivated unless otherwise specified, Chrome-Moly Steel - cadmium plated Type I, Class 3, dry film lube.

Ring lock Rings

Features; Necessary to complete fastener installation when mated with applicable ringlock studinsert.

Configuration; Standard & High strength

Materials; Alloy Steel & A286, Stainless Steel
Sizes; Mated to studsinserts with thread sizes from #8 through 1-in.(varies between studs and inserts)

Standards; A-A-59558, MS51997, MS51990, RL, RLR, RLRR

Finishes; C1117 - Cadmium plated per AMS-QQ-P416 Type II, Class 3, A286 - passivated per Ams-QQ-P-35

Procurement; MIL-I-45910

Staked Studs
Staked Studs
Features; Weight-saving and provides excellent resistance to torque-out and pullout. Integral stakes are driven into parent material for a positive mechanical lock. Can withstand high temperatures and loading.

Applications; Staked studs are used in a number of turbine engines and transmissiongear box applications. widely used for component assembly that cannot accept a through-bolt and nut combination.

Configuration; Shear, Lightweight, Heavy Duty

Materials; 303 Stainless, A286, 4140 Alloy Steel, Alloy 718 (INCONEL(TM) 718), 6A1-4V Titanium

Sizes; #10 through 1inch, 5mm-12mm

Standards; NASM51833, NASM51834, MS51833, MS51834

Nut End Threads; UNJF, UNJC, Metric

Finishes; Cadmium per AMS-QQ-P-416, Type II, Passivated per AMS-QQ-P-35 or ASTM A380

Performance; NASM45015

Solid Wall Staked Inserts

Solid Wall Staked Inserts-Fastener DimensionsFeatures - Designed to resist pullout and torque-out, these handy inserts are designed to hold the stake securely through an innovative locking mechanism that fixes it securely to the parent material. This innovation helps to protect the installation against unwanted rotation even under challenging conditions. The self-locking threads are found either in a polymer washer which forms part of the insert or in the insert itself. Available in a wide range of materials, our locking stakes include components which are specifically designed to be self-broaching, enabling them to be used effectively to reduce or eliminate broaching in tough substances such as Inconel, WASPALLOY, alloy steels and titanium.

Applications - If you're looking for a way of improving performance and enhancing thread life in more malleable materials, including magnesium and aluminum, then staked inserts are the perfect solution. The inserts may be used for maintaining and repairing costly forgings and castings, thread repair and vehicle maintenance, as well as specific applications within military defense systems, electronics and aircraft engines.

Configuration - Miniature, Lightweight, Heavy Duty, Extra Heavy Duty, Blind End, Solid Plug

Materials - 303 Stainless Steel, 304 Stainless steel, 17-4PH, A286, 4140 Alloy Steel, Alloy 718 (INCONEL(TM) 718), Titanium

Sizes - #2 through 1 14 inch, 4mm-24mm, internal thread

Standards - MS51830, MS51831, MS51832, NAS1394, NAS1395
ID Threads; UNJF, UNJC, Metric

Finishes - Cadmium per QQ-P-416; Type II, Class 2; Type II Class 3, Passivate per AMS QQ-P-35 or ASTM A380, Silver per AMS 2410, AMS 2411, or QQ-S-365, Type I, Grade A Molybdenum Disulfide solid film lubricant coated per AS5272on thread locking products Nickel per QQ-N-290

Locking Feature - Metal, VESPEL(TM), Nylon

Swaged Inserts

Thinwall Slimcert Swaged Inserts-Fastener DimensionsFeatures - The swaged insert benefits from exceptional strength and a shape which takes up significantly less space than other models. Successful fitting requires only a small boss. The insert benefits from a knurl shape that locks, resulting in an impressive torque-out level and straight-forward fitting in malleable and unyielding materials.

Applications - When you're working with a small boss area and still need top performance and to prolong shelf life, inserts that are swaged can be the perfect solution. Swaged inserts can be used in a variety of different industries, including aviation and electronics. These components weigh little and are ideal as a solid wall implant where exceptional performance is essential.

Configuration - For thinner walls, we offer a reduced thickness insert, provided in a standard length and in an extra-long length.

Materials - 4130 Alloy Steel, A286, 17-4 PH, Alloy 718(INCONEL(TM)718).

Sizes - #4 through 12inch, 5mm-10mm

Standards - MIL-I-459321 &3, AS5276063, AS5279093, NSA5054, EN32367, AS35045

ID Threads - UNJF, UNJC, Metric

Finishes - Cadmium per QQ-P-416 Type II, Class 2; TypeIII, Class3; Molybdenum Disulfide solid film lubricant per AS5272, Type I; Silver per AMS 2411 or QQ- S- 365, Type II, Grade B

Locking Features - Matel

Performance - MIL-I-45932, TS138, AS3506 and EN3297

Specials

Fastener Dimensions, Inc. specializes in the modification of fasteners and the design of Custom Bolts and Screws to fit you custom applications. FDI has the ability to manufacture these fasteners in any size and with any material. We have wire EDM services to make any head style standard or custom. We are well known for our ability to modify AN, MS, NAS, NASM and AS fasteners to a custom customer blueprint. We have made parts like this for Boeing, Sikorsky, ITT, SPX, and Magellan just to name a few.

Our combined knowledge and experience can assist you in any application you may have. Our secondary operations onsite allow us to produce some of the most complicated fasteners on the market. These secondary operations consist of but not limited to CNC Turning, Milling and Swiss Operations. We also do Drilling, Grinding, Tool Making, Part Marking, Thread Rolling and Thread Cutting, Hot Heading, Cold Heading and much, much more.

Combining strong engineering capability and highly skilled technical support, we have helped OEMs develop new products and designs. With current demands on technology leaping forward, Fastener Dimensions is at the forefront, surpassing customer expectations. Our engineers are standing by and are ready to assist you with your designs.