Our Products #4953492

The Fire-Dex H61 Fire Hood is a 2-layer tube hood with shoulder notch and bound notch bottom.

Features:
Compliant to NFPA 1971, current edition
XL model available for longer hood length, XL average length 20"
Average length 13"

All Fire-Dex NFPA hoods have:
Double layer
Full hemmed face opening and bottom
Sewn with Nomex thread
Flatlock seam construction
Fuller sizing for one size fits all comfort

Fabrics available:
(CX) Outer and inner layers 7 oz. CarbonX
(NE) Outer and inner layers 8 oz. 100% Nomex
(NL) Outer and inner layers 8 oz. (2080) Nomex Lenzing
(PL) Outer Layer 6 oz. (2080) PBI BlendInner Layer 8 oz. Nomex Lenzing

Back Pack Water Extinguishing System

The C&S Supply Back Pack Water Extinguishing System has a 5 Gallon capacity, 40" hose and double action hand pump for helping fight wildfires.

The Back Pack Wildland Extinguishing System comes with Industrial Quick Connect couplers for transport and for adding the NEW PP101 quick connect Foam System.

Features:
4.6 Gallon capacity
40 inch hose and double action hand pump extinguisher

Black Diamond Rubber Hip Boot, Comfort Fit

The Black Diamond Comfort Fit Rubber Hip Boot provides the ultimate in protection.

The Storz Molded Replacement Rubber Hose Gaskets come in 3", 4", 5" and 6" Suction or Pressure Gaskets.

Swivel Gaskets - Lathe cut swivel gaskets.

Tail Gaskets Ordering Information:
Bowl size or O.D. of hose
Type of hose (single or double jacket, rubber covered, soft or hard suction)

POLYURETHANE MOISTURE BARRIER

The Honeywell Eclipse 5400 Structural Firefighter Gloves come with a convertible cuffs feature making it the only glove that can be converted and worn as a wristlet or as a gauntlet.

The Eclipse Firefighter Gloves come with an extra-wide cuff, coupled with the two-ply Nomex spandex fold-back wristlet, makes donning easy. The Honeywell Eclipse 5400 Structural Firefighter Gloves DuPont Nomex brand fibers in the cuff provide superior strength and durability as well as high levels of thermal protection, standing up to the heat.

Boston Leather Off Duty Belt, 1-12" Plain Leather

The Boston Leather Off Duty Belt are used by firefighters, police and emergency responders.

Features:
1 12" wide 10-12 ounce, drum dyed full grain English Bridle leather
Virtually any 'even' size up to 48" (additional sizes available upon request)
Made with the same quality materials and superior craftsmanship as our duty belts
Buckle available in 2 finishes (Solid brass also available for extra charge)
Used by firefighters, police and emergency responders

FlameFighter Quick Water Wildland Pump

The FlameFighter Quick Water Wildland Pump is a fully integrated state-of-the-art water control system that is Foam Capable.

1 12" Ball Shutoff, Pistol Grip Firefighting Nozzle

The 1 12" Ball Shutoff with Pistol Grip Firefighting Nozzle is constructed of hard anodized aluminum.

Features:
1 12" female wivel x 1 12" male ball valve
Composite bail handle
Pistol grip
Constructed of hard anodized aluminum
Quality polymer ball and seatseal mechanisms
Designed to accept pistol grip as needed
Can be used with all C&S nozzle Tips

The UK Rylee Fire Helmet Clip was designed by firemen in need of a helmet mounted light.

Using this clip, the versatile UK4AA and UK 3AA lights can be attached above or below the brim of any American classic style wide brim fire helmet for hands free lighting.

Components are stamped out of heavy gauge stainless steel for ruggedness.

A protective plate spreads the pressure from the clamping screw to prevent damage to brim of the helmet.

Best of all, it does not get in the way of goggles or a face shield.

Features:
Attaches UK4AA UK3AA light to all American classic style fire helmets
Heavy gauge stainless steel construction
Protective clamping plate prevents damage to rim of helmet
Clamps above or below brim of American style fire helmets
Does not interfere with Goggles or Face Shield

The Rice Hydrostatic 2 Outlet Fire Hose Tester is designed to safely test fire hose up to 6" in diameter.

Two independently controlled outlets, and a large 2.5" swivel inlet, to quickly fill and bleed lines for fire hose testing.

The EL-FHT Fire Hose Tester, meets testing standards as set forth in the NFPA (1962.7) and the RMA.

Features:
3 GPM up to 500 PSI
1 HP Electric Motor, TEFC, 110220V, 50 or 60 Hertz capability
Two independently controlled outlet ballvalves, with NST couplings
Stainless Steel liquid-filled gauge ensures accurate readings
Automatic Pressure regulator with inlet bypass
Rugged roll cage construction, protects pump from damage

Options:

Fire Hose Restraint (LINECAGE-1):

Rice Hydro introduces a brand new safety secure and anchoring device for use in fire hose testing. The Linecage was designed by a Fire Captain, with the safety and well being of his fellow firefighting brothers in mind. Protect yourself and your brothers with the new Rice Hydro Linecage safety anchor and securement device.

Features:
Meets NFPA 1962 7-6.2.6 requirements of Securing and Anchoring the fire hose while being tested.
Heavy gauge welded steel frame, powder coated
Locking hitchpins enclose and secure hose to Linecage
Quick links installed for quick and easy ANCHORING of Linecage
Safety limits the mobility of line when rupture occurs
The Linecage is designed with multiple locking holes to accommodate various hose sizes.
Stops a burst or ruptured line from retracting beyond the location of the tool, which should be placed approximately 2 FEET from the distal end of hose line.

Fire Hose Tester Pressure Wand (FHWA1):

Ideal for Haz-Mat and contaminated equipment wash down. Strong cleaning power at 500 PSI, yet soft enough to offer less risk for damage of department decals or custom paint jobs.

Features:
Dual tips offer option of spraying either Soap, Water or Both
50 Feet of High Pressure Hose for Long Range Mobility
Quick Disconnects for Easy OnOff Capability
Adjustable Injector for Soap or other Cleaning Solvents
Steel Construction, with Nylon Tip Guards and Handle