Post Buy Requirement
FS
United States
Add Review

Our Products

ASM Cross Cutter ClipMaster

for the clipping of veneer bundles of up to 1050 mm width across the grain
ideal for veneer thicknesses of up to 1.0 mm
electric gear-driven knife
cut against cutting mat
re-adjustable knife
2-hand knife triggering with foot pedal
View Complete Details

ASHO Cross Cutter ClipMaster

for clipping of veneer bundles of up to 800 mm width across the grain
ideal for veneer thicknesses of up to 1.0 mm
hydraulically driven knife and pressure beam
cut against cutting mat
open to one side, right-hand side stop
ideal for 90 cross cut
self-observing light barrier and protection fence
2-hand knife triggering with foot pedal
View Complete Details

ASHD Double Cross Cutting ClipMaster

for the clipping of veneer bundles of up to 850 mm width across the grain
ideal for veneer thicknesses of up to 1.0 mm
hydraulically driven knife and pressure beam
fixed cutting head on left, moveable cutting head on right
2-hand knife triggering with foot pedal
View Complete Details

Veneer Crossfeed Splicing Machine

  • Series FL-7 Veneer Crossfeed
Veneers of 0.8-6.0 mm thickness are spliced precisely, continuously and rapidly on this world-wide approved machine. Advantageous for rotary-cut veneer.

Pre-feeding System
Veneers of 0.8-6.0 mm thickness are spliced precisely, continuously and rapidly on this world-wide approved machine. Advantageous for rotary-cut veneer.

Pre-feeding System
View Complete Details

Veneer Crossfeed Splicing Machine

Veneer Crossfeed Splicing Machine

for the highspeed crossfeed splicing of sliced and rotary cut veneer
the fastest and best-selling veneer crossfeed splicing machine available
highest, unprecedented number of cycles of up to 30 joints per minute
constantly high performance of 10000 and more joints throughout a complete working shift
perfect joints for high and consistent end product quality
unique and praised Fisher+Rckle horizontal pressing system
suited for both PVAc and UREA type glues
dependable, reliable, enduring
easy operating via touch screen panel
clearly arranged icons on the screen panel facilitate easy access to relevant settings and parameters
separate pressure gauges ensure direct operator access to heating plate pressures, horizontal pressing system, etc. and short change-over times
infeed belt for automatic veneer infeed
moveable cross beam allows for quick and easy access to the heating plates for service and maintenance duties
few wear parts, little service and maintenance cost
up-to-date, modern machine design
modular and adaptable system
optional integration in automated processes
View Complete Details

Edge Trimming Machine

Edge Trimming and Reinforcement Machine

for the edge trimming and reinforcement of veneer lay-ons
edge reinforcement with paper tape or glue thread
with optional stacking device
rigid, rugged construction
minimum lay-on width 420 mm
trimmable veneer thicknesses of up to max. 1.5 mm
perfect cut due to double-driven trimming knives
re-grindable trimming knives
Operator Panel

The compact and clearly arranged operator panel features automatic width adjustment.

Edge reinforcement with paper tape

To prevent damage to freshly spliced veneer lay-ons, a self-adhesive tear-proof paper tape is applied along the edge. The lay-ons edges are then trimmed to size immediately after tape application.

Optional edge reinforcement with glue thread

The veneer edges may alternatively be reinforced with glue thread on both sides to prevent handling damages to the lay-on. Immediately after glue thread application, the lay-ons edges are trimmed to size.

Alignment

Automatic alignment via laser guide and contact pulley ensures fully square veneer lay-ons.

Out-feed

Veneer waste is extruded on the out-feed side and gathered in a receptacle.

Optional Stacking Device

Veneer lay-ons can automatically be processed onto a stacking device and stored on a scissor lifting table right after edge trimming and reinforcement.
View Complete Details

FTD Conveying System

Veneer Conveying Systems

in- and out-feed conveyors, discharge devices, cross-feed belts, single and double layer cross conveyors
for the automatic conveying of veneer strips and bundles
for the aerating of pre-glued veneer bundles
slack zones for continuous and efficient veneer processing
Automated Processes

From veneer preparation (cutting, gluing, fanning) to veneer splicing and stacking of layons, veneer conveying systems have become indispensable in automated veneer processing lines. They connect each independent application to one single, highly efficient processing line.

Customized Planning & Realization

Each conveying system, be it an in- or out-feed conveyor, a cross-feed belt or a cross conveyor, is planned and realized in a customized fashion in close co-operation with the customer.

Enhanced Functionality

Veneer conveyors not only serve the automatic transportation but also the aerating of pre-glued veneer bundles and act as a slack zone to ensure continuous processing.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (FisherRuckle Service, Inc.)
  • Tigerton, WI 54486 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/fisherruckle-service-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457984{main}( ).../index.php:0
20.01792011976include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.03712734600include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.04573670304header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice