Flakt Woods Fan

The Katana Plus rectangular duct fan with backward curved centrifugal impeller is available in sizes from 400x200mm to 1000x500mm and cover duties up to 3.1 cubic meters per second flow rate and 920 pascals pressure, and can operate in temperatures up to 70°C. All units are fitted with AC external rotor motors which run via a 230v single phase or 400v three phase feed, depending on unit size. The motor drives a backward curved centrifugal impeller which is made from aluminium. The casing is made from folded pre-galvanised sheet steel and is insulated with the addition of acoustic medium on the sides. All units have a swing out type casing.

Our JMv Aerofoil delivers aerodynamic efficiencies up to 84%, low SFPs and significant running cost and carbon emission reductions. Innovative CFD optimized design. Improved aerodynamic efficiency High efficiency design delivers lower running costs: Down by 27% Fully cased design – quick, simple and cost effective installation

Our JM Aerofoil fans deliver high aerodynamic efficiencies (up to 77%) and low specific fan powers. These benefits are achieved using Aerofoil section impeller blades and aerodynamically optimized hub design, which deliver peak operating efficiencies High Efficiency impeller design reduces SFP values and running costs.. Adjustable pitch impeller delivers precise performance.. Short or Long cased options provide installation flexibility

The Katana rectangular duct fan with backward curved centrifugal impeller is available in sizes from 400x200mm to 1000x500mm and cover duties up to 3.1 cubic meters per second flow rate and 920 pascals pressure, and can operate in temperatures up to 70°C. All units are fitted with AC external rotor motors which run via a 230v single phase or 400v three phase feed, depending on unit size. The motor drives a backward curved centrifugal impeller which is made from aluminium. The casing is made from folded pre-galvanised sheet steel. All units have a swing out type casing.

The Daisho twin box fan is available in a range of sizes from 125mm to 630mm diameter connection spigots and cover duties up to 3.5 cubic meters per second flow rate and 1250 pascals pressure. All units are fitted with high efficiency EC motors which run via a 230v single phase 50Hz feed, the motor drives a backward curved centrifugal impeller which is made from glass fibre reinforced plastic. The motors are controlled by Flakt Woods own iFan controller with integrated speed controller and most importantly an auto changeover switch. In the unlikely event of one of the fans failing, the auto changeover switch detects that a fan has failed and automatically switches on the second blower. The casing of the Twin box fan is made from folded pre-galvanized steel and is lined with acoustic medium. The unit is suitable for mounting in the horizontal orientation using the integrated mounting brackets, if vertical configuration is required please contact us.

The Falcata rectangular duct fan is available in a range of sizes from 500x200mm to 900x500mm and cover duties up to 2.8 cubic meters per second flow rate and 1050 pascals pressure and can operate in temperatures up to 65°C. All units are fitted with AC external rotor motors which run via a 230v single phase or 400v three phase feed, depending on unit size. The motor drives a forward curved centrifugal impeller which is made from galvanised steel. The unit casing is made from folded pre-galvanised sheet steel.