Post Buy Requirement
FE
United States
Add Review

Other Products / Services

Side Skirting Brush

  • Weight 2.4
Side Skirting Brush for Spray Master Single & Double Radius Fenders
Skirting is effective in reducing side spray
Easy to install
Keeps mirrors and trucks cleaner, improving driver and motorist visibility
Air flows freely through flexible filament skirting preventing heat build-up on brakes and tires
ORDER DETAILS

Packaged set includes enough brush for one pair of Spray Master Half Tandem Fenders (cut in half to apply) and stainless steel hardware
Order one packaged set for Single Radius (cut in half before installing)
Order two packaged set for Double Radius
View Complete Details

Hinge Bolt-Pin Hardware Packaged Set

  • Weight 0.42
Hinge Bolt-Pin Hardware Packaged Set
part no. 021-00376
weight: 0.42
Steel construction
Zinc-plated finish
Packaged Set includes one bolt, one nut, and four washers
Bolt size is 12-13 x 5.50 long
View Complete Details

W-Style Reefer Top Closure Brackets

  • Material Steel
W-Style Reefer Top Closure Brackets
FEATURES

Black E-coat or stainless steel finish
Steel construction
Image show in Black E-Coat
View Complete Details

Vent Door Latch Assembly

Vent Door Latch Assembly and Components
FEATURES

Stainless steel construction
Built in anti-theft capability
Spring assisted pressure closing feature
Latch assembly bulk kit includes latch, striker plate, keeper bracket, and female door hold back
View Complete Details

Safety Service Decks

Safety Service Decks
All-direction, all-weather, slip-resistant design
Positive drainage
Available in aluminum and galvanized steel
Rugged, lightweight construction
Cross braces for added strength
Pre-drilled holes for clamps
Complete with mounting hardware
Adjustable clamps allow for universal mounting
Simple, economical, clamp-on installation
View Complete Details

Cam Assembly

  • Weight 0.10
Cam Assembly
part no. 021-00184
weight: 0.10
dimensions:
FEATURES

Steel construction
Zinc plated finish
Set screw included
View Complete Details

One-Piece Weld-On Hinge Butts

One-Piece Weld-On Hinge Butts (Custom)
31 hot rolled steel stamping
Plain, zinc plated, or stainless steel available
Straight type or notched type available
Optional hardware available
View Complete Details

Square Butt Leaf Hinge Assemblies

  • Weight 1.79
8.00" Square Butt Leaf Hinge Assemblies
Stainless steel construction with spot welded leaves and thrust washers
Polished finish
.34 round hole
Minimum order of 100
View Complete Details

Fruehauf Style Three-Hole Hinge

  • Weight 2.40
Fruehauf Style Three-Hole Hinge 8.75"
part no. 022-00007
weight: 2.40
FEATURES

Steel construction
Zinc plated finish
View Complete Details

Eberhard Style Handle

  • Weight 1.70
Eberhard Style Handle
part no. 023-00491
weight: 1.70
FEATURES

Steel construction
Zinc plated finish
View Complete Details

Fruehauf Style Hold-Back

  • Weight 0.40
Fruehauf Style Hold-Back
part no. 022-00487
weight: 0.40
dimensions:
FEATURES

Steel construction
Plastic coated cable
View Complete Details

Miner Style Half-Bearing Rod Guide

  • Weight 0.35
Miner Style Half-Bearing Rod Guide
part no. 023-00966
weight: 0.35
FEATURES

Black plastic
Part number represents one rod guide
View Complete Details

End Hinge Cover

  • Material Stainless Steel
End Hinge and Roller Cover for 2" Rollers
Steel construction
E-coat, E-coatpowder coat and Stainless Steel finish available
Removable cover allows roller change without hinge removal
View Complete Details

Side Skirting Filament

  • Weight 38
  • dimensions 4in
Side Skirting Filament
FEATURES

.375 mounting area for versatile application


ORDER DETAILS

Each filament is 12 in length
When ordering, specify number of feet desired
View Complete Details

Coil Rack

  • weight 4.54
Coil Rack
FEATURES

Keeps cargo safe and secure
E-coat finish for corrosion resistance
To use, place two 44 wood supports on top of racks, position cargo and secure with straps or other binding devices
11 gauge steel
Reusable
View Complete Details

Heavy-Duty Coil Rack

  • weight 11.33
Heavy-Duty Coil Rack
Keeps cargo safe and secure
Added support for heavy hauling
Hot dip galvanized finish for corrosion resistance
To use, place two 44 wood supports on top of racks, position cargo and secure with straps or other binding devices
Reusable
View Complete Details

Stamped Steel Tie Down Clip

  • Weight 1.54
1" Stamped Steel Tie Down Clip
FEATURES

This product is for tie download securement purposes only.
Plain finish
3.00, 4.00, and Angled D-ring bulk kits also available
View Complete Details

Dry Freight Vent Doors

  • size 17.00″ x 11.38
Traditional Style Long Side Opening Dry Freight Vent Doors
FEATURES

Anti-intrusion screen available
Your choice of white baked-on enamel or stainless steel door face finishes
Rubber hold-back kit included
Uses one-piece aluminum frame
Contact us about doors and options not shown
SPECIFICATIONS

Nominal door size = 17.00 x 11.38
Flange x Outside Cutout = 20.00 x 15.00
Panel = 17.50 x 12.00
Anti-intrusion screen included
View Complete Details

Hold-Back Handle Type Anchor

  • Weight 04
Hold-Back Handle Type Anchor
part no. 021-00043
weight: .04
Handle Type Anchor used in our Chain and Snap Hold-Back Assembly
Steel construction
Zinc plated finish
View Complete Details

Miner Style Bottom Guide Cams

Miner Style Top and Bottom Cams
DISPLAY IMAGE FEATURES LEFT-HAND CAM

FEATURES

Hot-dip galvanized finish
ORDER DETAILS

Specify right-hand or left-hand when ordering
View Complete Details

Great Dane Style Four-Hole Hinge

  • Weight 1.19
Great Dane Style Four-Hole Hinge 8.38 x 3.88
part no. 022-01009
weight: 1.19
Aluminum extrusion
With insert
View Complete Details

Miner Style Three-Hole Hinges

  • Thickness 0.25″
  • Dimensions 9.50” x 4.00”
Miner Style Three-Hole Hinges 9.50 x 4.00
Steel construction
Zinc plated finish
Available with or without zerk fitting
Thickness = 0.25
View Complete Details

Hyundai Style Three-Hole Hinge

  • Weight 1.51
  • DIMENSIONS 9.56” x 4.00”
Hyundai Style Three-Hole Hinge 9.56 x 4.00
part no. 023-01657
weight: 1.51
Aluminum extrusion
With insert
View Complete Details

Bottom Roller Shaft Cover

Bottom Roller Shaft Cover and Stud Plate for ToughTrak, PolyTrak, and Flush Mount 2" Roller Doors (1 Stud or 2 Stud)
IMAGE FEATURES STAINLESS STEEL OPTIONS

APPLICATION

Attaches to bottom panel for roller support
FEATURES

Steel construction
E-coat or stainless steel finish
View Complete Details

Trailer Belly Panel

  • Weight 9.94
  • Dimensions 60 x 24.5 in
Trailer Belly Panel
FEATURES

Protects cross members in the event of a tire blow out
Reduces drag
Easy installation onto trailer cross members
16 gauge high performance aluminum
Universal fit
Part number represents one piece
View Complete Details

Two-Step Folding Steps

  • capacity 500 lbs.
Folding Steps (Two-Step)
Black primed steel
Fits any standard truck frame
500 lbs. load capacity
Available with 5.00 wide ICC bumper bar
Serial numbers applied at factory for identification
34.13 frame width
4.00 frame thickness
29.00 step width
9.00 step depth
7.88 step rise
View Complete Details

Weld Tire Carrier

  • Weight 44
Weld-On Tire Carrier
Heavy-duty, 12 gauge, formed steel construction for U channel
0.375 x 4.00 L support
Black primer finish
Accommodates tires up to 11.00 x 22.00
Additional warning decal sent at customers request
Comes with chain to secure tire
Assembled, packaged set
View Complete Details

Chain And Snap Hold-Back Assembly Packaged Sets

Chain and Snap Hold-Back Assembly Packaged Sets and Component Parts
Steel construction
Zinc plated finish
View Complete Details

Hold-Back Packaged Sets

Hold-Back Packaged Sets and Components
Hot-dipped galvanized finish
Hook mounting holes are .41
Handle mounting holes are .20
View Complete Details

AeroSaver Replacement Hardware

  • Weight 5.93
AeroSaver Replacement Hardware
part no. 034-02649
weight: 5.93
dimensions:
FEATURES

Support hardware is zinc
Skirting attachment hardware is stainless steel
Includes two changes and hardware
View Complete Details

Corner Iron

  • Weight 4.85
  • Dimensions 12″ x 12″ x 1-1/4″ wide
Corner Iron
part no. 023-00975
weight: 4.85
dimensions:
FEATURES

Perfect 900, helps square up trailer
12 x 12 x 1-14 wide
Part number represents one piece
Forged steel construction
View Complete Details

Spray Suppression Skirting

  • Weight 1.56 lbs.
Spray Suppression Skirting
FEATURES

Air flows freely through the flexible filament
Brush reduces spray to keep vehicles cleaner
Significant spray reduction improves both driver and motorist visibility
ORDER DETAILS

Each skirting packaged set comes in 8.00 sections with two spray suppression brushes (6.00, 9.00, or 12.00 length) and two aluminum channels (90-degree or straight mount)
Special corrugated packaging allows parcel shipment of one to two kits per package
Channel is available separately with the following Part Nos:
View Complete Details

Recessed Tie Down Ring Assembly

  • Weight 2.50
Recessed Tie Down Ring Assembly
This product is for tie download securement purposes only.
Steel construction
Zinc plated finish
Drain holes in bottom of cup
Working load is 2, 300 lbs.
Ultimate breaking strength is 7, 000 lbs.
Ring opening width is 3.25
View Complete Details

Flared End Axle

  • Dimensions 8.5 x .20 x 1.90 in
  • Weight 2.50
Flared End Axle
Steel construction with black primer finish
Application: Standard Foot
Length = 8.50
O.D. = 1.90
Thickness = 0.20
View Complete Details

Custom One-Piece Braces

  • Diameter 66
FEATURES

Black primer finish
.66 diameter mounting holes
Side loaded ends
Hole Center Length = per customer specification
Material Options Include:
1.25 pipe
1.50 pipe
1.63 tube
2.00 pipe
View Complete Details

Two-Piece Adjust-a-Brace Package Set

  • thickness 12 gauge
Two-Piece Adjust-a-Brace Package Set
FEATURES

High strength steel tubing with reinforced end sections for greater tear-out resistance
Black E-coat finish
Heavy Duty Specs:
Brace Wall thickness = 14 gauge
Insert Wall thickness = 12 gauge
Brace End O.D. 1.88
Insert End O.D. 1.63
Standard Duty specs:
Brace Wall thickness = 14 gauge
Insert Wall thickness = 14 gauge
Brace End O.D. 1.75
Insert End O.D. 1.5
View Complete Details

Adjust-a-Shaft Bulk Kits

  • Material Tubular steel
FEATURES

Tubular steel construction
Black primer finish
Adjustable to reduce inventory requirements
ORDER DETAILS

Kits consist of two ends to fit over 1.00 shafting, choice of five middle tubes to cover all normal mounting lengths, and hardware
Adjust-a-Shaft Ends and Tubes also available
View Complete Details

Removable Cranks

  • Material Metal
Removable Cranks
FEATURES

Metal handle
Steel construction
Black primer finish
Handle is 3.75 long
View Complete Details

Vertical Folding Cranks

  • Size 1.25″
Vertical Folding Cranks
FEATURES

Metal handle
Steel construction
Handle is 3.75 long
Tube O.D. size is 1.25
View Complete Details

Horizontal Folding Cranks

  • Size 1.25″
Horizontal Folding Cranks
FEATURES

Metal handle
Steel construction
Black E-coat finish
Handle is 3.75 long
Tube O.D. size is 1.25
View Complete Details

Louvered Vents

  • Diameter 2″
Louvered Vents
IMAGE SHOWN IS ADJUSTABLE LOUVERED VENT IN ALUMINUM

FEATURES

Slide arm openscloses vent
The back has four 2 diameter holes for air flow
Plain or white enamel finish
Adjustable and non-adjustable (always open) air flow available
View Complete Details

"Belly Box" Latch Assembly Packaged Sets

  • Material Stainless steel
"Belly Box" Latch Assembly Packaged Sets
FEATURES

Stainless steel or zinc finish
ORDER DETAILS

Packaged set latch assembly includes latch and keeper bracket
View Complete Details

Manifest Box

  • quantities 26
Manifest Box
FEATURES

Aluminum or white enamel case with weatherproof gasket seal to protect contents
Tab and click stop for secure latch closing along with padlock eyelet, chrome plated clip and aluminum rivets
Stainless steel hinge and latch assembly
Plain aluminum or white enamel finish
Aluminum Manifest Box is available in quantities of 26 per box
View Complete Details

Decorative Safety Service Decks

Decorative Safety Service Decks - Top Mount
Slip-resistant ribbed deck design
Positive drainage
Rugged, lightweight construction
Aluminum construction
Mounting hardware included
View Complete Details

Three Step Folding Steps

  • capacity 500 lbs
Folding Steps (Three-Step)
Black primed steel
Fits any standard truck frame
500 lbs. load capacity
Available with 5.00 wide ICC bumper bar
Serial numbers applied at factory for identification
34.63 frame width
5.00 frame thickness
29.00 step width
9.00 step depth
7.88 step rise
View Complete Details

Back Of Cab Tire Carriers

Back of Cab Tire Carriers
Heavy-duty, 316 steel construction
Black primer finish
Mounting brackets and hardware are not included
May use 033-00374 (Qty. 2) for mounting bracket order separately
View Complete Details

Latch Bar Assembly

  • Weight 0.30
Latch Bar Assembly
part no. 021-00207
weight: 0.30
dimensions:
FEATURES

Steel construction
Zinc plated finish
View Complete Details

Retainer Cam Assembly

  • Weight 0.44
Retainer Cam Assembly
part no. 021-00217
weight: 0.44
dimensions:
FEATURES

Steel construction
Zinc plated finish
View Complete Details

Narrow Butt Hinge Assembly

  • Weight 2.20
3.25" Narrow Butt Hinge Assembly

part no. 021-00181
weight: 2.20
dimensions:
FEATURES

Steel construction, plain finish
Includes removable pin using nut, bolt, and thrust washers
View Complete Details

Square Butt Hinge Assembly

5.00" Square Butt Hinge Assembly
Stamped steel construction
Zinc plated finish
Stamped reinforcing rib
Non-removable steel pin and nylon sleeve bearings
Flush mount
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Fleet Engineers)
  • Muskegon, MI 49442 map
  • Share us via