Our Products #4951179

Flex-Hose Co.'s Guideline pipe alignment guides are designed to maintain the longitudinal position of the pipe centerline without causing axial restraint.
The two-piece inside spider and two-piece guiding sleeve provide easy installation.

Flex-Hose Co.'s StopLinks are used on style NNS and NND rubber expansion joints where necessary anchoring is not practical.
Features: StopLink simplifies the installation of NNS and NND style rubber expansion joints. Easy to install, factory designed and assembled with no loose parts or field adjustments. Simply bolt to mating flanges. They are a fraction of the weight of conventional control rod assemblies reducing shipping cost. The dampening properties of cable prevent transmission of vibration and noise from rotational equipment or media flow. Cables are factory set to protect the connector from over extension without restricting design movements. No future maintenance or checking of the nut gaps which is necessary on conventional control rods.

Flex-Hose Co.'s Bellowsflex metal bellows type expansion joints are designed for a wide range of applications and service conditions.
The standard single-ply or multi-ply bellows element is fabricated with 300 stainless steel. Other stainless steel or heat and corrosion resistant alloys are optional.

Bellowsflex can also be supplied with accessories such as tie rods, flow liners, and shrouds.

The UL Listed Tri-Flex Loop Hanger Assembly Kit saves valuable time on Tri-Flex Loop installation, making it easy to support and hang the revolutionary Tri-Flex Loop.
The UL Listed Seismic RopeCable used in our hanger assemblies conform to the requirements of ASCE (American Society of Civil Engineers) guidelines for structural applications of wire rope, in that the cable is pre0stretched and the permanent end fittings maintain the break strength of the cable with a safety factor of two.

Hose flexibility simplifies rail car unloading, bulk material transfer, in-plant pneumatic conveying systems and liquidslurry transfer.

See through construction allows easy visibility to detect blockage and confirm flow
Smooth interior eliminates material build-up
Static dissipating materials andor wire helix
Abrasion resistant interior liner
Mating Cam & Groove fittings
Mating clamps for adequate holding power to fittings andor equipment

Accommodates clean air, vapor control and dustparticulate removal where flexibility is key.

Raised external wear strip
With or without wire helix
Cuffed ends
UV resistant and Flame Retardant
Mating clamps for adequate holding power to equipment andor rigid ductwork

Flex-Hose Co.'s Flexpress externally pressurized guided expansion joint provides a safe and reliable means of absorbing high axial motions.
Flexpress offers a totally enclosed, externally pressurized multi-ply stainless steel bellows that is protected from external damage by an external cover. In the unlikely event of a bellows failure, the cover is designed for full line pressure. The Flexpress carbon steel pipe integral liner is designed to prevent bellows impingement or fatigue due to flow induced vibration.

Flex-Hose Co.'s spool type expansion joints are used to compensate for movement, absorb vibration, and reduce noise in piping systems.
Features: This joint is available in single arch, multiple arch, and filled arch. Also available in concentric or eccentric designs.

The integral rubber flanges utilize metal retaining rings to assure uniform sealing against mating flanges.

Flex-Hose Co.'s patented Tri-Flex Loop makes a world of difference in critical piping connections. It is designed to provide a superior flexible pipe loop that will absorb and compensate multi-plane pipe movements simultaneously as well as reduce piping stress.
Features: It is the safest and most reliable means of absorbing up to 8 inches of movement resulting from thermal changes, random seismic shifts, and misalignment in a piping system. It also dampens vibration and reduces the transmission of noise. Tri-Flex Loops are designed to be pressure tested 1.5 times their maximum rated working pressure and manufactured with a 4:1 safety factor. The Tri-Flex Loop eliminates the need for the added installation expense of traditional long length pipe loops and its compact design saves valuable space.

Tri-Flex Loops do not impose additional thrust loads on the piping system and thus eliminate the need for costly anchoring or thrust blocks while also eliminating pipe guides required by traditional pipe designs such as expansion pipe loops or expansion joints.

Pumpsavers are used to prevent damage to pumps caused by piping stress. Pumpsaver connectors also absorb vibration, accommodate misalignment, and reduce noise in pump installations

Features: Pumpsaver connectors are easily installed and reduce the possibility of pump failure.

Pumpflex is ideal in applications for vibration control and noise reduction as well as stress relief, misalignment and thermal growth.

Features: Pumpflex features a 300 series stainless steel bellows construction. It has a short face-to-face dimension for compact installations.

In addition, Pumpflex features tie rod restraints to prevent elongation, and compression stops to prevent over-compression. Standard pressure ratings of 150 or 300 PSI up to 850 F.