Flex-O-Lite, Inc.

Lower CTE (Coefficient of Thermal Expansion) Reduced warpage improved dimensional stability with low, uniform shrinkage High compressive strength Improved surface hardness and surface smoothness Improved flow at high loading Increase flex modules in plastic compounds Reduced VOC’s for paints and coatings Improved scrub, burnish and abrasion resistance Increased roundness, hardness and crush strength

As the striping material wears, the glass spheres that are blended in the material are exposed to give continuous retro-reflectivity, increasing the life of the material. In thickly-applied materials, such as thermoplastic or MMA, the blended spheres are referred to as "intermix" beads. The size of the intermix beads in these materials is usually similar to the size of the drop-on highway safety marking spheres. In thin film paint materials, the blended spheres are referred to as "premix" beads. Premix beads are typically smaller than drop-on paint highway safety marking spheres. Both intermix and premix give continuous retro-reflectivity on pavement markings that wear and lose the reflective top dressing of highway safety marking spheres.

Reflectorized pavement markings make a significant contribution to highway safety, especially in conditions of poor visibility at night. Applying Potters' Highway Safety Marking Spheres is one of the most cost-effective ways to increase highway safety in these conditions. Potters’ Standard Highway Safety Marking Spheres meet or exceed every adopted highway safety marking sphere standard in effect today (AASHTO M247). They are consistent in quality and composition and exhibit excellent durability. Standard Highway Safety Marking Spheres can be applied as drop-on spheres in all commercial applications—waterborne paint, epoxy, polyester, thermoplastic, MMA, polyurethane, polyurea and VOC-compliant paints.

Reflectorized pavement marking lines make a significant contribution to highway safety, especially in conditions of poor visibility at night and in wet weather. Applying Potters VISIBEAD® Highway Safety Marking Sphere technology is one of the most cost-effective ways to increase highway safety in these conditions. VISIBEAD Benefits: Stand higher = More visible than conventional glass beads in inclement weather conditions Overcome limitations of conventional glass beads providing superior wet-night visibility Three to four times the diameter of conventional glass beads = Improved durability and unique clarity Meet or exceed every standard in effect today, consistent in quality & composition, & exhibit excellent durability Meet and exceed the rigorous heavy metals limitation standards set forth by state and federal standards Easily applied with existing equipment as drop-on spheres in all commercial applications Used in waterborne paint, epoxy, polyester, thermoplastic, MMA, polyurethane, polyurea and VOC-compliant paints Specialized coatings enable these spheres to combine chemically with the binder = Improved adhesion, optimized embedment & maximized retroreflectivity Potters Industries’ VISIGUN® safety marking sphere dispenser is designed for optimal application of VISIBEAD® spheres

As the striping material wears, the glass spheres that are blended in the material are exposed to give continuous retro-reflectivity, increasing the life of the material. In thickly-applied materials, such as thermoplastic or MMA, the blended spheres are referred to as "intermix" beads. The size of the intermix beads in these materials is usually similar to the size of the drop-on highway safety marking spheres. In thin film paint materials, the blended spheres are referred to as "premix" beads. Premix beads are typically smaller than drop-on paint highway safety marking spheres. Both intermix and premix give continuous retro-reflectivity on pavement markings that wear and lose the reflective top dressing of highway safety marking spheres.