Our Products #319251

The PTEZ Belt Trainer provides Flexco yet another high-performance tracking idler at an economical price point. Applying our patented PTEZ mechanism to our unique Pivot and Tilt feature, the PTEZ responds and compensates immediately to belt misalignment using the tapered end roller profile to engage the training action. This ensures that the belt stays away from the structure and the material stays on the belt without the use of sensor or edge rollers. As a result, PTEZ may be used in nearly any application to provide tracking and prevent damage to the belt or structure.

Features and Benefits:

Superior Performance
Pivot and tilt technology provides two forces to track your belt, making it more effective than wobblers or pivot-only trainers
Standard urethane lagging for exceptional life over conventional rubber lagged trainers
Easy Ordering and Installation
Designed to meet instant demands for training solutions, the PTEZ is available with a short lead time
The simple brackets and component construction ensures a quick and easy installation
Installs easily on clean side of belt when the belt is cupped
Universal Design
Drops into current return roller location
Designed for CEMA standard structure

Applications:

Single-direction or reversing belts with speeds up to 1000 fpm (5 Ms)
For medium-duty belts up to 1600 PIW
Belts with edge damage or wear and belts mistracking to one or both sides
Wet or dry conditions
Underground mining, hard rock, metal mining, aggregate, and bulk material handling

Hand skiving baler belts takes time and precision. The Flexco Baler Belt Skiver is a safe and effective tool for quickly and easily skiving baler belts. Simply set the skive height, close the cover, and skive your belt in less than 30 seconds using a cordless drill. With the cover closed, the blade is completely enclosed during the skiving process, eliminating the chance for injury while skiving.

Features and Benefits:

Optional bench mounting kit for belt shop use
Hold down shaft also acts as a blade guard
Closed cover clamps belt tightly in place to allow for uniform skive
Driven with an electric drill or ratchet
Skive depth is adjustable with use of shims tool includes convenient storage location so shims
are available when you need them
Lightweight extruded aluminum body
Portable weighs less than 2 pounds
Skive in less than 30 seconds
Can be used on new or worn belts
For belt widths up to 7.5"
Adjustable skived belt thickness from 0.200" to 0.250"
Skiving Applications:

Mini Rough Top
Diamond Top
Crescent Top
HD Mini Rough Top
HD Diamond Top
Other Impression Top Baler Belts

The Aero Splice Press offers the latest technology to create a superior endless splice typically in less than 10 minutes. All necessary components are compactly self contained, making the press easy to use, store, and transport. Recent advancements allow the user to easily store and access over 1, 000 splice recipes.



Features and Benefits:

Splice times as short as 8-12 minutes
All-in-one unit with no external components such as water tanks and pumps
Intuitive HMI control panel and scroll through navigation
USB port loads recipes for future use and allows for storing and sharing
more than 1, 000 recipes between tools and across locations
Independent temperature settings for top and bottom platen to easily follow recommended splice parameters
150mm effective heat zone across the entire tool width eliminates unfilled fingers for a flawless splice
Integrated air cooling system with top and bottom fans causes the belt to be cooled down quickly after cooking for increased splice quality and reduced cycle times
A single press can accommodate multiple power requirements with power cords and internal componentry
Tool has been designed and accessed to meet high safety, health, and environmental protection requirements

Options:

Available in muliple sizes
Offered in multiple voltage ranges including the option of operating the 625, 925 and 1225 models with a 110v power source

Applications:

Belt shops
On-site jobs
Specifications:
Voltage compatibility: Refer to chart below for detailed pressvoltage compatibility

Urethane skirting offers a more wear resistant material than typical rubber, often providing as much as 3-4 times the wear life in similar applications. The lower coefficient of friction reduces strain on the system.
Works with Flexco series of skirt clamps that offer simple serviceability: RMC1Pal-Pak, Flex-Lok and Flex-Seal
Uses soft durometer (65A) urethane with exceptional tear resistance to ensure a good seal and long belt life
25 roll size ensures easy transportation while the 35 chamfer eliminates the typical skirting break-in period
Suitable for most applications: single direction or reversing belts, wet or dry conditions, old or new belts, vulcanized or mechanically spliced systems
Rated for temperatures from -20 F to 180 F (-30 C to 82 C)

Flexco Modular Impact Beds are engineered with maximum capacity in mind, ensuring full containment in and around the load zone. Modular Impact Beds are also designed with universal components that result in an effective, yet affordable, solution. The system is based on 2 (600mm) sectional footprint which allows you to control your impact zone design by using an all-bar section in high-impact areas and slider impact section where you require lower impact resistance or sealing. When both styles are used together you can achieve ultimate performance in your load zone.


Features and Benefits:

Family of Products
Available with all bars for heaviest impact or impact roll for lighter impact
Seamlessly combine both versions side-by-side in load zone for ultimate performance with impact absorption and sealing
Great Serviceability
Sectional slide-out service
Allows for service along-side the conveyor
1 UHMW bars last longer and can be installed any direction
Universal Component Design
Standardized component design
Reduces lead-time and simplifies service parts
Options:

24 to 72 (600 to 1800mm)
Adjustable trough angle 20, 35, 45
Impact Energy
Up to 200 lb-ft (up to 25kg-m) MSB
Up to 1500 lb-ft (up to 200kg-m) MIB
Applications:

Designed for CEMA standard structure
Single-direction or reversing belts with speeds up to 1000 fpm (5 ms)
Light or heavy duty applications
Wet or dry conditions
Underground mining, hard rock and metal mining, aggregate, and bulk material handling

Features and Benefits

Segmented blade precleaner
7 (175mm) diameter pole ends telescope into 8 (200mm) diameter center pole and bolt in place, creating an extremely sturdy pole that can be transported and installed in segments.
Cleaner pole segments made of powder-coated steel for extra stability and corrosion resistance
Optimal material path cleaning minimizes differential wear between the end blade segments and center blade segments
Robust dual XDST Tensioners maintain blade-to-belt pressure and allow for easy visual inspection
19-38" (490 mm) UltraShear blade tallest Flexco precleaner blade
Options

UltraShear blade segments available in two widths 6 and 12 (150mm and 300mm). Segments are configured to match material path
Special sizes available upon request
Combine with MHS HD Secondary Cleaner to create a system delivering maximum cleaning power
Applications

Heaviest-duty, high speed applications in copper, coal, iron ore and oil sands
Primary cleaning position
For belt widths from 42" 120" (1050 3000 mm); poles can accommodate belt widths plus 63" (1600 mm)

Transferring products safely from one belt to another or from belt to chute or other structure is often one of the biggest problems for material transfer operations. Segmented Transfer Plates from Flexco can help prevent product loss at the transition point, preventing potential damage to the product as well as the belt and conveyor structure. Bright yellow segments snap onto the mounting bar to accommodate belts up to 60" (1500 mm) wide and gaps from 4" to 10" (100 mm to 250 mm).
Features and Benefits:

Bar Mounted Segments are easy to install and quickly release under pressure of trapped objects
Durable HDPE segments lock together and provide a low coefficient of friction so product slides easily across the transfer
Different segment lengths can be paired together to provide options for offset mounting to accommodate structure variations
Provides a smooth transition at the transfer point
The two-piece mounting bracket allows for easy mounting and removal
Bright yellow color makes segments easy to monitor for replacement
Compatible with both endless and mechanical belt splices
Precision molded segments ensure accurate fit of transfer in gap
Applications:

Package Handling
Airports
Recycling
Shingle Manufacturing
Wood Processing
Specifications:

Belt widths up to 60
Transfer widths from 4 to 10
Segments are durable HDPE
Bridge segment available for belt to chute or slide applications