Post Buy Requirement
FS
United States
Add Review

Our Products

Air Injection System

There are many industrial humidification applications where a high pressure fog system is not appropriate or cannot provide the required level of performance due to condensation concerns. Fogco has developed a specialized air injection system to address these specific industrial requirements.

The Fogco Air Injection Dry Fog System utilizes our proprietary system design and can produce over 150 lbs of dry fog per hour and allows for on-site adjustments to the system performance and output by changing the air and water pressure with the included regulators.

The Drip Free air injection nozzles include a spring loaded check valve that will prevent the water supply from running if there is a loss of air pressure. The valve also prevents dripping from the nozzle when the system shuts down.
View Complete Details

Misting Kits

For the ultimate in convenience, Fogco now offers a full range of turn-key misting kits. These mist kits are appropriate for any commercial or residential mist system installation and include everything you need in one convenient package.

The misting kits in our inventory are commercial grade and feature a direct drive or a pulley drive mist pump and come with an industry leading 5-year warranty.

The misting kits are available in lengths ranging from 20 to 90 feet of mist line. In each case, you have the option of choosing from several tubing options including slip lok fittings and nylon mist tubing; soldered copper mist tubing; or our proprietary robotically welded stainless steel mist tubing. Regardless of what you choose, each option provides a 1000-psi operating pressure.
View Complete Details

Misting System Pumps

Fogco offers a broad range of 1000-psi high pressure misting systems. From our economical direct drive pump to our fully customized units, all of our mist pumps are built with high quality components and have a proven track record of over 25 years.

All of our standard direct drive and pulley drive pumps are designed and built with UL recognized components and include thermal and short circuit protection.

The direct drive units include a thermal overload in the motor and a fuse protection for the solenoid branch circuit.

The pulley drive units include thermal overload in the motor, fuse protection for all branch circuits, and an internal circuit breaker. The pulley drive units also include a low water safety switch which will prevent damage to the pump caused by operating with insufficient water supply. These upgrades make the Fogco range of pumps the most protected and highest rated pumps on the market. Fogco backs that up with our industry leading 5 year warranty!

In addition, our pulley drive mist pumps utilize a low speed, 4-pole motor and a pulleybelt transmission. This design reduces the operating speed of the bare pump which reduces the noise and vibration while maintaining the required pressure and flow. The pulley drive pumps are available in 115V or 230V.

The direct drive mist pumps are medium duty outdoor rated units. These pumps are ideal for light to medium duty misting applications and provide quality components in a small and convenient platform. They are available in 115V and 230V.

If you are looking for a custom solution, Fogco offers completely customized misting pumps for a wide variety of applications that feature custom controls to suit specific needs. Our custom series pumps can be built for voltages from 115V to 575V 3 Phase. Additional components, such as electric zone valves, drain valves, and safety switches are also available. These custom mist system pumps can be designed to include the use of a variable frequency drive (VFD) for multi-zone applications.
View Complete Details

Misting System Parts

Fogcos accessories include components needed to customize a misting system for a specialty application as well as replacement parts for all the necessary components used in the building of a Fogco pump including high pressure zone valves and low pressure solenoid valves, electrical safety switches controlled by flow or pressure, replacement regulator valves and pressure gauges.
View Complete Details

Evolution Humidification Fan

The Evolution is designed for effective climate control for smaller areas with restricted clearance for the fog. The misting fan is suitable for cooling, humidification, and limited dust control applications and provides 250 cfm using .23 amps at 115V. The mist fan covers up to 1000 sq. ft. or 10, 000 cu. ft.

The cannon design of the Standard Evolution and the internal guide fins produce a strong and focused air stream which projects the fog up to 50 feet from the unit making it ideal for low ceiling applications.

The Evolution is designed to provide a projection of the fog over longer distances with a narrower focus range. The unit can effectively cover an area of 20 in width and up to 50 feet in length. The unit will provide better absorption of the moisture from the system, and a more uniformed distribution of the fog.
View Complete Details

Stainless Steel Misting Adaptors

Fogco offers both standard impellar nozzles as well as the latest cleanable nozzle design with 1024 threads. Mist nozzles are available in brass or all stainless steel. Fogco also offers a variety of other mister nozzle designs as special order items. These include 1224 threads, 18 threads with orifice sizes as large as .048.

The Standard nozzle range includes sizes from .008 to .020 orifice. They are available in brass with a stainless steel insert or as special order in stainless steel material. Flow rates for this range vary from 020 gpm to .055 gpm

The Cleanable mist nozzles include sizes from .006 to .020 and include an anti drip adapter. They are available in brass or all stainless steel with orifice sizes from .006 to .020 and flow rates from .010 gpm to .045 gpm.

The Nozzle Adapter range includes extensions, clusters, and swivel fittings and multi thread adapters.
View Complete Details

Misting System Filters

Water filtration is a necessary step for any misting system. Fogco offers a variety of filtration options including sediment and phosphate cartridges. For systems that require purified water, Fogco also offers design and consultation services for incorporating a reverse osmosis (RO) unit into the misting system.

Fogcos filter range includes 1 micron, 5 micron, or 10 micron cartridges as well as a specialty Phosphate cartridge for the 10 filter canisters. This phosphate cartridge helps minimize the adverse effects of calcium and dissolved solids present in the water supply.

For very high flow rates (above 10 GPM), Fogco has a large canister with dual stage cartridge or a multi cartridge filter with a stainless steel canister.
View Complete Details

Mist System Fittings

Over the last 25 years Fogco has developed an extensive range of tubing and fittings exclusively for mist system and fog system applications. The options include pre-welded stainless steel in 10 foot or 20 foot lengths, pre-soldered copper in 10 lengths, or flexible nylon (up to 500 lengths) and slip lok fittings. To connect rigid lengths together, we offer double ferrule brass or stainless steel compression fittings.

The most versatile and convenient option is our high pressure flexible nylon and proprietary slip lok fittings. This option allows for on-site assembly and the ability to remove and reassemble individual fittings at any time without the need for special tools. The nozzle fittings can also be rotated on the nylon tubing allowing for changing the direction of the mist from each individual fitting. These are highest quality slip lok fittings on the market. They are NOT Chinese imports.

As an alternative to using the 38 nylon tubing as a feed line, we also offer a 14 Synflex dual ply high pressure hose option. This multi-ply hose carries a rated operating pressure of 1500 psi and can support up to 3 gallons per minute. The fittings are designed to be assembled without the need for any crimping tools. The tubing can be cut to length and assembled and installed on site.

For a misting system with a more permanent and aesthetically pleasing appearance, or and for a system with concealed mist lines, we manufacture pre-soldered copper tubing with customized nozzle spacing and specialty fittings. This approach is ideal for in-stucco, in-deck, or in-fountain system applications.
View Complete Details

Desert Fog Fans

The Fogco range of misting fans includes both humidification and cooling fans designed to achieve uniformed distribution of the mist and improved absorption of moisture. This allows our fan products to cool and humidify more efficiently than other products on the market.

The Fogco product range includes the WindChill patio cooling fan; the Revolution and Revolution II humidification fan; and the Evolution and Evolution Mini humidification fan.

The WindChill is designed as a patio cooling fan. It mounts to the ceiling as a typical patio fan and is designed for commercial, residential or industrial cooling applications. Our patio misting fans come in a variety of different styles. It can cover up to 900 square feet. It includes all the necessary hardware and comes with 10 cleanable .008 nozzles (part # 95037).

The Revolution is the flagship product in the Fogco product range. It is a proprietary design that includes a 2100 CFM humidification misting fan. It can disperse the mist up to 30 from the fan making it capable of covering up to 3600 square feet. It is available as a ceiling mount or with a portable stand. Due to the many different applications that this product is used for, there is no single nozzle option that is ideal. For this reason, it does not include nozzles with the fan but is adaptable to any of our standard or cleanable nozzles.

The Revolution II misting fan is a smaller version of the Revolution and also provides distribution of the fog 360 degrees around the perimeter of the fan. It includes a 250 CFM internally mounted fan and can cover up to 900 square feet. It can disperse the mist up to 15 from the fan. For the same reasons as the Revolution product, it does not include the nozzles but can be used with any of our standard or cleanable nozzles.

The Evolution misting fan incorporates a cannon design and is effective for areas with restricted height, or long and narrow applications. It projects the fog along a column of air in a single direction up to 50 from the fan. It provides 250 cfm and can be used for cooling, humidification, or limited dust control for small or restricted areas. It does not include the nozzle. It is recommended that this product utilize our standard or cleanable nozzle with a .006 orifice (part # 95031 or 95032) or a .008 orifice (part # 95037, 95033, or 93508). This fan can also incorporate our 3 nozzle cluster (part # 93013) if additional moisture is required. At Fogco we build each outdoor misting fan to be low maintenance and long lasting.
View Complete Details

Fog Systems Universal Remote Control

The Universal Remote Control (URC) with key fob transmitter and wireless receiver provides automated operation of a fog system from a remote location up to 150 feet away.

The 115V version of this controller is available for a 15 or 20 amp circuit. It includes a wireless receiver, contactor, power supply cord with the appropriate Nema plug and receptacle in a weather proof outdoor rated enclosure. This version of the control box is designed to plug into a 15 amp or 20 amp dedicated circuit and can operate a system up to 12 amps and 16 amps respectively. Both are capable of handling up to 2 HP.

The 230V version of this controller is also available for a 15 or 20 amp circuit. It includes a wireless receiver, a fused transformer, a power supply cord with the appropriate Nema plug and receptacle in a weather proof outdoor rated enclosure. This version of the control box is designed to plug into a 15 amp or 20 amp dedicated circuit and can operate a system up to 12 amps and 16 amps respectively. Both are capable of handling up to 3 HP.

The controller is outdoor rated and operates on one of four selectable RF channels. Additional transmitters and receivers can be used to control other pump functions.
View Complete Details

Patio Misting Kits

For the ultimate in convenience, Fogco now offers a full range of turn-key misting kits. These mist kits are appropriate for any commercial or residential mist system installation and include everything you need in one convenient package.

The misting kits in our inventory are commercial grade and feature a direct drive or a pulley drive mist pump and come with an industry leading 5-year warranty.

The misting kits are available in lengths ranging from 20 to 90 feet of mist line. In each case, you have the option of choosing from several tubing options including slip lok fittings and nylon mist tubing; soldered copper mist tubing; or our proprietary robotically welded stainless steel mist tubing. Regardless of what you choose, each option provides a 1000-psi operating pressure.
View Complete Details

Outdoor Misting Kits

For the ultimate in convenience, Fogco now offers a full range of turn-key misting kits. These mist kits are appropriate for any commercial or residential mist system installation and include everything you need in one convenient package.

The misting kits in our inventory are commercial grade and feature a direct drive or a pulley drive mist pump and come with an industry leading 5-year warranty.

The misting kits are available in lengths ranging from 20 to 90 feet of mist line. In each case, you have the option of choosing from several tubing options including slip lok fittings and nylon mist tubing; soldered copper mist tubing; or our proprietary robotically welded stainless steel mist tubing. Regardless of what you choose, each option provides a 1000-psi operating pressure.
View Complete Details

Outdoor Mist Systems

The Fogco range of misting fans includes both humidification and cooling fans designed to achieve uniformed distribution of the mist and improved absorption of moisture. This allows our fan products to cool and humidify more efficiently than other products on the market.

The Fogco product range includes the WindChill patio cooling fan; the Revolution and Revolution II humidification fan; and the Evolution and Evolution Mini humidification fan.

The WindChill is designed as a patio cooling fan. It mounts to the ceiling as a typical patio fan and is designed for commercial, residential or industrial cooling applications. Our patio misting fans come in a variety of different styles. It can cover up to 900 square feet. It includes all the necessary hardware and comes with 10 cleanable .008 nozzles (part # 95037).

The Revolution is the flagship product in the Fogco product range. It is a proprietary design that includes a 2100 CFM humidification misting fan. It can disperse the mist up to 30 from the fan making it capable of covering up to 3600 square feet. It is available as a ceiling mount or with a portable stand. Due to the many different applications that this product is used for, there is no single nozzle option that is ideal. For this reason, it does not include nozzles with the fan but is adaptable to any of our standard or cleanable nozzles.

The Revolution II misting fan is a smaller version of the Revolution and also provides distribution of the fog 360 degrees around the perimeter of the fan. It includes a 250 CFM internally mounted fan and can cover up to 900 square feet. It can disperse the mist up to 15 from the fan. For the same reasons as the Revolution product, it does not include the nozzles but can be used with any of our standard or cleanable nozzles.

The Evolution misting fan incorporates a cannon design and is effective for areas with restricted height, or long and narrow applications. It projects the fog along a column of air in a single direction up to 50 from the fan. It provides 250 cfm and can be used for cooling, humidification, or limited dust control for small or restricted areas. It does not include the nozzle. It is recommended that this product utilize our standard or cleanable nozzle with a .006 orifice (part # 95031 or 95032) or a .008 orifice (part # 95037, 95033, or 93508). This fan can also incorporate our 3 nozzle cluster (part # 93013) if additional moisture is required. At Fogco we build each outdoor misting fan to be low maintenance and long lasting.
View Complete Details

Mist System Fittings

Over the last 25 years Fogco has developed an extensive range of tubing and fittings exclusively for mist system and fog system applications. The options include pre-welded stainless steel in 10 foot or 20 foot lengths, pre-soldered copper in 10 lengths, or flexible nylon (up to 500 lengths) and slip lok fittings. To connect rigid lengths together, we offer double ferrule brass or stainless steel compression fittings.

The most versatile and convenient option is our high pressure flexible nylon and proprietary slip lok fittings. This option allows for on-site assembly and the ability to remove and reassemble individual fittings at any time without the need for special tools. The nozzle fittings can also be rotated on the nylon tubing allowing for changing the direction of the mist from each individual fitting. These are highest quality slip lok fittings on the market. They are NOT Chinese imports.

As an alternative to using the 38 nylon tubing as a feed line, we also offer a 14 Synflex dual ply high pressure hose option. This multi-ply hose carries a rated operating pressure of 1500 psi and can support up to 3 gallons per minute. The fittings are designed to be assembled without the need for any crimping tools. The tubing can be cut to length and assembled and installed on site.

For a misting system with a more permanent and aesthetically pleasing appearance, or and for a system with concealed mist lines, we manufacture pre-soldered copper tubing with customized nozzle spacing and specialty fittings. This approach is ideal for in-stucco, in-deck, or in-fountain system applications.
View Complete Details

Fog System Parts

Fogcos accessories include components needed to customize a misting system for a specialty application as well as replacement parts for all the necessary components used in the building of a Fogco pump including high pressure zone valves and low pressure solenoid valves, electrical safety switches controlled by flow or pressure, replacement regulator valves and pressure gauges.
View Complete Details

High Pressure Misting Pumps

Fogco offers a broad range of 1000-psi high pressure misting systems. From our economical direct drive pump to our fully customized units, all of our mist pumps are built with high quality components and have a proven track record of over 25 years.

All of our standard direct drive and pulley drive pumps are designed and built with UL recognized components and include thermal and short circuit protection.

The direct drive units include a thermal overload in the motor and a fuse protection for the solenoid branch circuit.

The pulley drive units include thermal overload in the motor, fuse protection for all branch circuits, and an internal circuit breaker. The pulley drive units also include a low water safety switch which will prevent damage to the pump caused by operating with insufficient water supply. These upgrades make the Fogco range of pumps the most protected and highest rated pumps on the market. Fogco backs that up with our industry leading 5 year warranty!

In addition, our pulley drive mist pumps utilize a low speed, 4-pole motor and a pulleybelt transmission. This design reduces the operating speed of the bare pump which reduces the noise and vibration while maintaining the required pressure and flow. The pulley drive pumps are available in 115V or 230V.

The direct drive mist pumps are medium duty outdoor rated units. These pumps are ideal for light to medium duty misting applications and provide quality components in a small and convenient platform. They are available in 115V and 230V.

If you are looking for a custom solution, Fogco offers completely customized misting pumps for a wide variety of applications that feature custom controls to suit specific needs. Our custom series pumps can be built for voltages from 115V to 575V 3 Phase. Additional components, such as electric zone valves, drain valves, and safety switches are also available. These custom mist system pumps can be designed to include the use of a variable frequency drive (VFD) for multi-zone applications.
View Complete Details

Patio Misting Fan

The Fogco range of misting fans includes both humidification and cooling fans designed to achieve uniformed distribution of the mist and improved absorption of moisture. This allows our fan products to cool and humidify more efficiently than other products on the market.

The Fogco product range includes the WindChill patio cooling fan; the Revolution and Revolution II humidification fan; and the Evolution and Evolution Mini humidification fan.

The WindChill is designed as a patio cooling fan. It mounts to the ceiling as a typical patio fan and is designed for commercial, residential or industrial cooling applications. Our patio misting fans come in a variety of different styles. It can cover up to 900 square feet. It includes all the necessary hardware and comes with 10 cleanable .008 nozzles (part # 95037).

The Revolution is the flagship product in the Fogco product range. It is a proprietary design that includes a 2100 CFM humidification misting fan. It can disperse the mist up to 30 from the fan making it capable of covering up to 3600 square feet. It is available as a ceiling mount or with a portable stand. Due to the many different applications that this product is used for, there is no single nozzle option that is ideal. For this reason, it does not include nozzles with the fan but is adaptable to any of our standard or cleanable nozzles.

The Revolution II misting fan is a smaller version of the Revolution and also provides distribution of the fog 360 degrees around the perimeter of the fan. It includes a 250 CFM internally mounted fan and can cover up to 900 square feet. It can disperse the mist up to 15 from the fan. For the same reasons as the Revolution product, it does not include the nozzles but can be used with any of our standard or cleanable nozzles.

The Evolution misting fan incorporates a cannon design and is effective for areas with restricted height, or long and narrow applications. It projects the fog along a column of air in a single direction up to 50 from the fan. It provides 250 cfm and can be used for cooling, humidification, or limited dust control for small or restricted areas. It does not include the nozzle. It is recommended that this product utilize our standard or cleanable nozzle with a .006 orifice (part # 95031 or 95032) or a .008 orifice (part # 95037, 95033, or 93508). This fan can also incorporate our 3 nozzle cluster (part # 93013) if additional moisture is required. At Fogco we build each outdoor misting fan to be low maintenance and long lasting.
View Complete Details

Brass Misting Nozzles

Fogco offers both standard impellar nozzles as well as the latest cleanable nozzle design with 1024 threads. Mist nozzles are available in brass or all stainless steel. Fogco also offers a variety of other mister nozzle designs as special order items. These include 1224 threads, 18 threads with orifice sizes as large as .048.

The Standard nozzle range includes sizes from .008 to .020 orifice. They are available in brass with a stainless steel insert or as special order in stainless steel material. Flow rates for this range vary from 020 gpm to .055 gpm

The Cleanable mist nozzles include sizes from .006 to .020 and include an anti drip adapter. They are available in brass or all stainless steel with orifice sizes from .006 to .020 and flow rates from .010 gpm to .045 gpm.

The Nozzle Adapter range includes extensions, clusters, and swivel fittings and multi thread adapters.
View Complete Details

Brass Misting Adaptors

Fogco offers both standard impellar nozzles as well as the latest cleanable nozzle design with 1024 threads. Mist nozzles are available in brass or all stainless steel. Fogco also offers a variety of other mister nozzle designs as special order items. These include 1224 threads, 18 threads with orifice sizes as large as .048.

The Standard nozzle range includes sizes from .008 to .020 orifice. They are available in brass with a stainless steel insert or as special order in stainless steel material. Flow rates for this range vary from 020 gpm to .055 gpm

The Cleanable mist nozzles include sizes from .006 to .020 and include an anti drip adapter. They are available in brass or all stainless steel with orifice sizes from .006 to .020 and flow rates from .010 gpm to .045 gpm.

The Nozzle Adapter range includes extensions, clusters, and swivel fittings and multi thread adapters.
View Complete Details

Stainless Steel Misting Nozzles

Fogco offers both standard impellar nozzles as well as the latest cleanable nozzle design with 1024 threads. Mist nozzles are available in brass or all stainless steel. Fogco also offers a variety of other mister nozzle designs as special order items. These include 1224 threads, 18 threads with orifice sizes as large as .048.

The Standard nozzle range includes sizes from .008 to .020 orifice. They are available in brass with a stainless steel insert or as special order in stainless steel material. Flow rates for this range vary from 020 gpm to .055 gpm

The Cleanable mist nozzles include sizes from .006 to .020 and include an anti drip adapter. They are available in brass or all stainless steel with orifice sizes from .006 to .020 and flow rates from .010 gpm to .045 gpm.

The Nozzle Adapter range includes extensions, clusters, and swivel fittings and multi thread adapters.
View Complete Details

Misting System Filter Cartridges

Water filtration is a necessary step for any misting system. Fogco offers a variety of filtration options including sediment and phosphate cartridges. For systems that require purified water, Fogco also offers design and consultation services for incorporating a reverse osmosis (RO) unit into the misting system.

Fogcos filter range includes 1 micron, 5 micron, or 10 micron cartridges as well as a specialty Phosphate cartridge for the 10 filter canisters. This phosphate cartridge helps minimize the adverse effects of calcium and dissolved solids present in the water supply.

For very high flow rates (above 10 GPM), Fogco has a large canister with dual stage cartridge or a multi cartridge filter with a stainless steel canister.
View Complete Details

Misting System Canisters

Water filtration is a necessary step for any misting system. Fogco offers a variety of filtration options including sediment and phosphate cartridges. For systems that require purified water, Fogco also offers design and consultation services for incorporating a reverse osmosis (RO) unit into the misting system.

Fogcos filter range includes 1 micron, 5 micron, or 10 micron cartridges as well as a specialty Phosphate cartridge for the 10 filter canisters. This phosphate cartridge helps minimize the adverse effects of calcium and dissolved solids present in the water supply.

For very high flow rates (above 10 GPM), Fogco has a large canister with dual stage cartridge or a multi cartridge filter with a stainless steel canister.
View Complete Details

Dry Fog Industrial Humidification Systems

There are many industrial humidification applications where a high pressure fog system is not appropriate or cannot provide the required level of performance due to condensation concerns. Fogco has developed a specialized air injection system to address these specific industrial requirements.

The Fogco Air Injection Dry Fog System utilizes our proprietary system design and can produce over 150 lbs of dry fog per hour and allows for on-site adjustments to the system performance and output by changing the air and water pressure with the included regulators.

The Drip Free air injection nozzles include a spring loaded check valve that will prevent the water supply from running if there is a loss of air pressure. The valve also prevents dripping from the nozzle when the system shuts down.
View Complete Details

Misting Systems Universal Remote Control

The Universal Remote Control (URC) with key fob transmitter and wireless receiver provides automated operation of a fog system from a remote location up to 150 feet away.

The 115V version of this controller is available for a 15 or 20 amp circuit. It includes a wireless receiver, contactor, power supply cord with the appropriate Nema plug and receptacle in a weather proof outdoor rated enclosure. This version of the control box is designed to plug into a 15 amp or 20 amp dedicated circuit and can operate a system up to 12 amps and 16 amps respectively. Both are capable of handling up to 2 HP.

The 230V version of this controller is also available for a 15 or 20 amp circuit. It includes a wireless receiver, a fused transformer, a power supply cord with the appropriate Nema plug and receptacle in a weather proof outdoor rated enclosure. This version of the control box is designed to plug into a 15 amp or 20 amp dedicated circuit and can operate a system up to 12 amps and 16 amps respectively. Both are capable of handling up to 3 HP.

The controller is outdoor rated and operates on one of four selectable RF channels. Additional transmitters and receivers can be used to control other pump functions.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Fogco Systems, Inc.)
  • Chandler, AZ 85226 map, United States
  • Share us via