Post Buy Requirement
FS
United States
Add Review

Our Products

Humidity Controllers

Fogcos humidity and temperature controllers are all proprietary in design. They have been developed by Fogco specifically for cooling and humidification control using a misting system.

The FOGCOntroller II is a single zone controller with 2 separate single poledouble throw relays with programmable delay startstop. This unit can be operated with the internal sensor or it can be connected to one of our external sensors if remote monitoring is required. This controller requires a 24 VAC power supply.

Fogco also offers a Blueprint Digital Atmosphere Controller (BDAC). This controller provides some additional functionality and is considered an alternative to the FOGCOntroller II for specific applications. All product specifics can be found on the BDAC product page.

Fogco has also developed a line of plug-and-play remote controls designed to be used for any motor up to 2 HP at 115V and 3 HP at 230V. The Universal Remote Control (URC) range is available in a 15 amp and 20 amp version for both 115V and 230V systems. These units provide automated operation of the misting system from a remote location up to 150 feet away. Additional transmittersreceivers can be used to control other pump functions.

The remote control unit comes with a key fob transmitter and wireless receiver (in one of 5 available rf channels), and a motor start contactor mounted in an outdoor rated enclosure. The remote control includes a 6 foot power cord and a female receptacle (for plugging the pump directly into the remote control box).
View Complete Details

Zone Valve

Stainless HP 32 zone valve with 38 ports

Category: MISTING AND FOG SYSTEM PARTS AND ACCESSORIES.
Tags: HIGH PRESSURE MISTING SYSTEM VALVES, MIST SYSTEM ACCESSORIES, MIST SYSTEM COMPONENTS, MIST SYSTEM REPLACEMENT PARTS, MIST SYSTEM ZONE VALVES.
View Complete Details

Direct Drive Mist Pump

This Kit range provides a complete system as a single part number. It includes everything needed for standard mist system installation. Specific mist kit contents can be seen by clicking the individual kit descriptions below.

This range of misting kits utilizes our 1000 psi Fogco Direct Drive misting pump, a 50 length of flexible nylon feed line, a filter assembly with filter cartridge, filter canister, and all the needed fittings to connect from a standard hose bibb to the filter and from the filter to the pump inlet.

This kit also includes all of the necessary Fogco Slip Lok fittings and 38 high pressure nylon tubing to complete a mist system installation for the listed lengths.

Since Fogco is a manufacturer, we have the ability to provide customized mist kits using a variety of different components and designs. Nozzle spacing can be increased or decreased depending on specific system requirements and the pumps can be customized to add automated capability or to enhance the performance and function of the misting pump.

If you need something different than what these standard kits provide, contact our Customer Service Department at 480 507 6478 or simply fill out the Drop Us A Line contact form in the right hand margin.
View Complete Details

Low Pressure Switch

Low pressure switch with 14 FNPT; 2 pole NO contacts; rated 20 amp and 1.5 HP at 115V1Ph, 2 HP and 12 amp at 230V1Ph, 3 HP and 10 amps at 230V3Ph; minimum 35 PSI closing pressure

Category: MISTING AND FOG SYSTEM PARTS AND ACCESSORIES.
Tags: MIST SYSTEM ACCESSORIES, MIST SYSTEM COMPONENTS, MIST SYSTEM REPLACEMENT PARTS, MIST SYSTEM SWITCHES.
View Complete Details

High Pressure Misting Pumps

Fogco offers a broad range of 1000-psi high pressure misting systems. From our economical direct drive pump to our fully customized units, all of our mist pumps are built with high quality components and have a proven track record of over 25 years.

All of our standard direct drive and pulley drive pumps are designed and built with UL recognized components and include thermal and short circuit protection.

The direct drive units include a thermal overload in the motor and a fuse protection for the solenoid branch circuit.

The pulley drive units include thermal overload in the motor, fuse protection for all branch circuits, and an internal circuit breaker. The pulley drive units also include a low water safety switch which will prevent damage to the pump caused by operating with insufficient water supply. These upgrades make the Fogco range of pumps the most protected and highest rated pumps on the market. Fogco backs that up with our industry leading 5 year warranty!

In addition, our pulley drive mist pumps utilize a low speed, 4-pole motor and a pulleybelt transmission. This design reduces the operating speed of the bare pump which reduces the noise and vibration while maintaining the required pressure and flow. The pulley drive pumps are available in 115V or 230V.

The direct drive mist pumps are medium duty outdoor rated units. These pumps are ideal for light to medium duty misting applications and provide quality components in a small and convenient platform. They are available in 115V and 230V.

If you are looking for a custom solution, Fogco offers completely customized misting pumps for a wide variety of applications that feature custom controls to suit specific needs. Our custom series pumps can be built for voltages from 115V to 575V 3 Phase. Additional components, such as electric zone valves, drain valves, and safety switches are also available. These custom mist system pumps can be designed to include the use of a variable frequency drive (VFD) for multi-zone applications.
View Complete Details

Stainless Steel Misting Nozzles

Fogco offers both standard impellar nozzles as well as the latest cleanable nozzle design with 1024 threads. Mist nozzles are available in brass or all stainless steel. Fogco also offers a variety of other mister nozzle designs as special order items. These include 1224 threads, 18 threads with orifice sizes as large as .048.

The Standard nozzle range includes sizes from .008 to .020 orifice. They are available in brass with a stainless steel insert or as special order in stainless steel material. Flow rates for this range vary from 020 gpm to .055 gpm

The Cleanable mist nozzles include sizes from .006 to .020 and include an anti drip adapter. They are available in brass or all stainless steel with orifice sizes from .006 to .020 and flow rates from .010 gpm to .045 gpm.

The Nozzle Adapter range includes extensions, clusters, and swivel fittings and multi thread adapters.
View Complete Details

Filter Cartridges

Water filtration is a necessary step for any misting system. Fogco offers a variety of filtration options including sediment and phosphate cartridges. For systems that require purified water, Fogco also offers design and consultation services for incorporating a reverse osmosis (RO) unit into the misting system.

Fogcos filter range includes 1 micron, 5 micron, or 10 micron cartridges as well as a specialty Phosphate cartridge for the 10 filter canisters. This phosphate cartridge helps minimize the adverse effects of calcium and dissolved solids present in the water supply.

For very high flow rates (above 10 GPM), Fogco has a large canister with dual stage cartridge or a multi cartridge filter with a stainless steel canister.
View Complete Details

Stainless HP NC Zone Valve

Stainless HP NC zone valve with 14 ports

Category: MISTING AND FOG SYSTEM PARTS AND ACCESSORIES.
Tags: HIGH PRESSURE MISTING SYSTEM VALVES, MIST SYSTEM ACCESSORIES, MIST SYSTEM COMPONENTS, MIST SYSTEM REPLACEMENT PARTS, MIST SYSTEM ZONE VALVES.
View Complete Details

Brass Double Ferrule

  • Country of Origin India
  • Size 1.1/2inch
  • Type Brass Ferrules
  • Material Brass
  • Application Gas Fitting, Oil Fitting, Water Fitting
  • Feature Blow-Out-Proof, Casting Approved, Durable

Over the last 25 years Fogco has developed an extensive range of tubing and fittings exclusively for mist system and fog system applications. The options include pre-welded stainless steel in 10 foot or 20 foot lengths, pre-soldered copper in 10 lengths, or flexible nylon (up to 500 lengths) and slip lok fittings. To connect rigid lengths together, we offer double ferrule brass or stainless steel compression fittings. The most versatile and convenient option is our high pressure flexible nylon and proprietary slip lok fittings. This option allows for on-site assembly and the ability to remove and reassemble individual fittings at any time without the need for special tools. The nozzle fittings can also be rotated on the nylon tubing allowing for changing the direction of the mist from each individual fitting. These are highest quality slip lok fittings on the market. They are NOT Chinese imports. As an alternative to using the 38 nylon tubing as a feed line, we also offer a 14 Synflex dual ply high pressure hose option. This multi-ply hose carries a rated operating pressure of 1500 psi and can support up to 3 gallons per minute. The fittings are designed to be assembled without the need for any crimping tools. The tubing can be cut to length and assembled and installed on site. For a misting system with a more permanent and aesthetically pleasing appearance, or and for a system with concealed mist lines, we manufacture pre-soldered copper tubing with customized nozzle spacing and specialty fittings. This approach is ideal for in-stucco, in-deck, or in-fountain system applications. For treated water or higher pressure systems (or if you just want the look of a stainless steel fog line) we manufacture robotically welded stainless steel mist tubing with customized nozzle spacing. 38 and 12 sizes are available.

View Complete Details

Patio Misting Fan

The Fogco range of misting fans includes both humidification and cooling fans designed to achieve uniformed distribution of the mist and improved absorption of moisture. This allows our fan products to cool and humidify more efficiently than other products on the market.

The Fogco product range includes the WindChill patio cooling fan; the Revolution and Revolution II humidification fan; and the Evolution and Evolution Mini humidification fan.

The WindChill is designed as a patio cooling fan. It mounts to the ceiling as a typical patio fan and is designed for commercial, residential or industrial cooling applications. Our patio misting fans come in a variety of different styles. It can cover up to 900 square feet. It includes all the necessary hardware and comes with 10 cleanable .008 nozzles (part # 95037).

The Revolution is the flagship product in the Fogco product range. It is a proprietary design that includes a 2100 CFM humidification misting fan. It can disperse the mist up to 30 from the fan making it capable of covering up to 3600 square feet. It is available as a ceiling mount or with a portable stand. Due to the many different applications that this product is used for, there is no single nozzle option that is ideal. For this reason, it does not include nozzles with the fan but is adaptable to any of our standard or cleanable nozzles.

The Revolution II misting fan is a smaller version of the Revolution and also provides distribution of the fog 360 degrees around the perimeter of the fan. It includes a 250 CFM internally mounted fan and can cover up to 900 square feet. It can disperse the mist up to 15 from the fan. For the same reasons as the Revolution product, it does not include the nozzles but can be used with any of our standard or cleanable nozzles.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Alan Whitaker (Fogco Systems)
  • 600 S. 56th street #9, United States
  • Share us via