Other Products / Services #4728855

Expanded PTFE (Teflon):Conforms easily, very high density when compressedpH 0-14, temp -400 to +500o F, pressure to 1450 psiGraphited yarn over inconel:High temperature, high pressure steam applicationspH 2-12, temp to 1200o F, pressure to 2500 psi

Lead times: from 7 to 10 days for a newproduct to 1 to 2 days for an existing productusual quantities from 5 or 10 to tens of thousandsfrom stock materials or customer provided materials: rubber, foam, vegetable fiber, cloth, cork, felt, gasket sheet, thin plastics and foils.

New standards have larger than nominal size inside diameter to 12" size - above 12" the ID is same as nominalOld ANSI standards have same ID as the nominal sizeFor water: neoprene, red rubber, " to 36"; full-face and raised face (ring)For fuels & oils: " to 24" full-face and raised face (ring)nitrile (NBR, buna-n), Viton, vegetable fiber and compressed sheet: Gardico 522T, Klinger C-4401, Garlock 3200For steam to 750o F: " to 36" full-face and raised face (ring) compressed sheet, aramid fiber with nitrile binderGardico 522T, Klinger C-4401, Garlock 3200For engine applications to 1200o F: synthetic fiber and nitrile with metal insert:Gardico 596B.For exhaust systems to 1800o F: vermiculite & ceramic fiber with metal insert Gardico 596E, 596G

Expanded PTFE extruded:pH 0-14, temperature to 600, pressure to 3000 psiSeals with low bolt loads, resists cold flow andhas good torque retention vs other PTFE materials18" to 1"

Foam strips, available with Pressure Sensitive Adhesive (PSA), for enclosure doors > closed-cell foams: neoprene (CCNS), EPDM, Viton, nitrile and PVC> microcell urethane (Poron)> open-cell and closed-cell siliconeGum rubber and 40A neoprene strips, available with 1 or 2 beveled edges for hatch covers & doorsCo-extruded open-cell foam core with solid neoprene coating for large hatch seals > good resilience of open-cell foam> water resistance and abrasion resistance of solid rubberCustom neoprene and nitrile strips for tank mountingStrips have been supplied from as small as 132" x 14" to 1" x 8" and 2" x 2" cross-sections.

Used to connect machinery to pipingUsed to isolate one pipe from anotherFor water: neopreneFor fuels & oils: nitrile (NBR, buna-n), VitonSingle & double arch, rubber & solid steel flanges

Allpax & Spearhead gasket cutter kits and partsArch punches, dove-tail punchesSteel rule diesAllpax 11-piece punch kit and parts for holes & washers 18" to 34"ODAllpax 16-piece punch kit and parts for holes & washers 18" to 1-316"OD

Used to seal shafts for rotating machinerySee Table for characteristics to match the applicationGFO, Graphite, Carbon & PTFE productsfor demanding applications.

Foam strips, available with Pressure Sensitive Adhesive (PSA), for enclosure doors > closed-cell foams: neoprene (CCNS), EPDM, Viton, nitrile and PVC> microcell urethane (Poron)> open-cell and closed-cell siliconeGum rubber and 40A neoprene strips, available with 1 or 2 beveled edges for hatch covers & doorsCo-extruded open-cell foam core with solid neoprene coating for large hatch seals > good resilience of open-cell foam> water resistance and abrasion resistance of solid rubberCustom neoprene and nitrile strips for tank mountingStrips have been supplied from as small as 132" x 14" to 1" x 8" and 2" x 2" cross-sections.

Allpax & Spearhead gasket cutter kits and partsArch punches, dove-tail punchesSteel rule diesAllpax 11-piece punch kit and parts for holes & washers 18" to 34"ODAllpax 16-piece punch kit and parts for holes & washers 18" to 1-316"OD