Post Buy Requirement
GI
United States
Add Review

Other Products / Services

Valve Stem Packing

Expanded PTFE (Teflon):
Conforms easily, very high density when compressed
pH 0-14, temp -400 to +500o F, pressure to 1450 psi
Graphited yarn over inconel:
High temperature, high pressure steam applications
pH 2-12, temp to 1200o F, pressure to 2500 psi
View Complete Details

Die Cutting

Lead times: from 7 to 10 days for a new
product to 1 to 2 days for an existing product
usual quantities from 5 or 10
to tens of thousands
from stock materials or customer provided
materials: rubber, foam, vegetable fiber, cloth,
cork, felt, gasket sheet, thin plastics and foils.
View Complete Details

Standard Flanges

New standards have larger than nominal size inside diameter to 12" size -
above 12" the ID is same as nominal
Old ANSI standards have same ID as the nominal size
For water: neoprene, red rubber, " to 36"; full-face and raised face (ring)
For fuels & oils: " to 24" full-face and raised face (ring)
nitrile (NBR, buna-n), Viton, vegetable fiber
and compressed sheet: Gardico 522T, Klinger C-4401, Garlock 3200
For steam to 750o F: " to 36" full-face and raised face (ring)
compressed sheet, aramid fiber with nitrile binder
Gardico 522T, Klinger C-4401, Garlock 3200
For engine applications to 1200o F: synthetic fiber and nitrile with metal insert:
Gardico 596B.
For exhaust systems to 1800o F: vermiculite & ceramic fiber with metal insert
Gardico 596E, 596G
View Complete Details

Joint Sealant

Expanded PTFE extruded:
pH 0-14, temperature to 600, pressure to 3000 psi
Seals with low bolt loads, resists cold flow and
has good torque retention vs other PTFE materials
18" to 1"
View Complete Details

Common Strips

Foam strips, available with Pressure Sensitive Adhesive (PSA), for enclosure doors

> closed-cell foams: neoprene (CCNS), EPDM, Viton, nitrile and PVC
> microcell urethane (Poron)
> open-cell and closed-cell silicone
Gum rubber and 40A neoprene strips, available with 1 or 2 beveled edges
for hatch covers & doors
Co-extruded open-cell foam core with solid neoprene coating for large hatch seals

> good resilience of open-cell foam
> water resistance and abrasion resistance of solid rubber
Custom neoprene and nitrile strips for tank mounting
Strips have been supplied from as small as 132" x 14" to 1" x 8" and 2" x 2" cross-sections.
View Complete Details

Expansion Joints

Used to connect machinery to piping
Used to isolate one pipe from another
For water: neoprene
For fuels & oils: nitrile (NBR, buna-n), Viton
Single & double arch, rubber & solid steel flanges
View Complete Details

Gasket Cutters

Allpax & Spearhead gasket cutter kits and parts
Arch punches, dove-tail punches
Steel rule diesAllpax 11-piece punch kit and parts for holes & washers 18" to 34"OD
Allpax 16-piece punch kit and parts for holes & washers 18" to 1-316"OD
View Complete Details

Mechanical Packing

Used to seal shafts for rotating machinery
See Table for characteristics to match the application
GFO, Graphite, Carbon & PTFE products
for demanding applications.
View Complete Details

Custom Strips

Foam strips, available with Pressure Sensitive Adhesive (PSA), for enclosure doors

> closed-cell foams: neoprene (CCNS), EPDM, Viton, nitrile and PVC
> microcell urethane (Poron)
> open-cell and closed-cell silicone
Gum rubber and 40A neoprene strips, available with 1 or 2 beveled edges
for hatch covers & doors
Co-extruded open-cell foam core with solid neoprene coating for large hatch seals

> good resilience of open-cell foam
> water resistance and abrasion resistance of solid rubber
Custom neoprene and nitrile strips for tank mounting
Strips have been supplied from as small as 132" x 14" to 1" x 8" and 2" x 2" cross-sections.
View Complete Details

Gasket Punches

Allpax & Spearhead gasket cutter kits and parts
Arch punches, dove-tail punches
Steel rule diesAllpax 11-piece punch kit and parts for holes & washers 18" to 34"OD
Allpax 16-piece punch kit and parts for holes & washers 18" to 1-316"OD
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Maury Brown (Gardico, Inc.)
  • Seattle, WA 98107-5111 map, United States
  • Share us via