Post Buy Requirement
GM
United States
Add Review

Other Products / Services

Silver Recovery Unit

The metallic ion exchange process for recovering silver from spent fixer and rinse water solutions generated by silver halide photochemistry. All products are made of low carbon steel required for this application.

Benefits:
Steel wool offers properties of chemically available iron.
Extremely high surface area to weight ratio.
Structural integrity in a single component system.
GMT offers technical support to choose the best product for your application.
View Complete Details

Floor Pads

A continuous 4" wide ribbon of steel wool that is available in a variety of 8 grades. Reels can be formed into large hand pads or wrapped into a Radial style floor pad which can be used on floor surfaces as recommended by the floor installer including marble, wood, tile and granite. Bulk reels are available in 5 lbs and 20 lbs increments.
View Complete Details

Concrete Reinforcement Fibers

GMT has 5 global locations producing concrete fibers
All locations use same standards to meet global requirements
All locations TSISO Certified
Steel Fibers comply with ASTM A820 standards
Several fiber types and lengths available to meet specific applications


Benefits:
More cost effective than traditional reinforcement due to the ease of mixing, placing and finishing
Fibers are distributed throughout the concrete to provide added toughness, shear strength and impact resistance
Reduced cracking due to concrete shrinkage
Does not require any special equipment to mix or finish
View Complete Details

Steel Wool Soap Pads

Global Material Technologies is the leading producer of private label soap pads in America. A proven product for scouring pots and pans, cleaning kitchens and appliances, scouring tough stains on hard surfaces like glass, tile, stainless steel and porcelain surfaces.
View Complete Details

Non-ferrous Alloys

Bronze wool can be used to polish teak wood on all marine craft, polish all metal and decorative metal surfaces, cleaning and polishing mirrors, windows, shower stalls and other glass surfaces. Bronze wool can also be used as an effective tool for blocking radio frequencies having to do with RF Shielding applications
Stainless alloys AISI 434 and AISI 316LU can be used in any cleaning, polishing, filtration and general industrial applications
Aluminum wool is an excellent choice for polishing aluminum surfaces as well as all sensitive decorative metal surfaces
Brass wool is used in any cleaning and polishing where moisture is present
View Complete Details

All Purpose Polishing Cloth

Applications:
Wood: Used alone or with a good quality spray polish or paste wax; provides the optimum sheen on all your wood surfaces including cabinets, furniture, baseboards, woodwork and paneling
Glass: Can be used alone without any liquid agent to clean and polish glass surfaces. Excellent for mirrors, windows, shower stalls and other glass surfaces
Metal: Can also be used with or without a cleaning compound. Can be used on brass lamps, railings and fixtures as well as other decorative metal surfaces.


Benefits:
We combine the finest "0000" steel wool with soft synthetic fibers in a composite textile using our own patented process*
This method produces a product ideal for polishing fine wood finishes, cleaning glass and brightening dull metal surfaces
They are re-useable and are designed to easily produce and maintain a professional looking finish
The combination of a fine grade steel wool with the soft synthetic fiber reduces the risk of cutting too deeply into a fine finish, while still achieving the gloss level desired with minimal effort
On metal surfaces the cloth brightens by removing only the dull oxide layer without scratching even soft metals like copper and aluminum
Pads may be used over and over for the same task
View Complete Details

Exhaust System Components

All products made from AISI 434 Stainless Steel
Other Alloys available - AISI 316L and AISI 430
Controlled Fiber Sizes - Ranging from 40 to 130 Microns
Controlled Basis Weights - Offered in grams per square meter
Good for sound attenuation
Excellent Heat Resistance - Up to 700 c
Specific weight tolerances
Durability
View Complete Details

Sealing

A nonwoven metal fiber felt that presents unique properties suitable for the production of gaskets. We offer a sintered, porous, monolithic skeletal substrate for gasketing and sealing applications.

Benefits:
Thermal Conductivity: Due to the metal properties from which our media is constructed, the monolithic state of the porous matrix, and high surface area of contact at the sealing surfaces, gaskets reinforced with GMT materials exhibit high thermal conductivity through the sealing surface. We have the capability to offer this material in the form of sheets, roll goods, or die-cut to specification.

Electrical Conductivity: In certain applications it may be desirable to impart electrical continuity through a sealing surface. The monolithic metallic nature of GMT gasket textiles are perfectly suited to allow for significant metal content at the interface surface and maintain electrical continuity through the gasket.

Physical Properties: Sintered metal fiber structures can be as low as 5% density, yet due to the high bond strength between fibers imparted by the sintering process, mechanical strength of gaskets can be increased dramatically. Blowout, creep and tearing are virtually eliminated. Like re-bar in concrete, GMT materials can improve gasket performance by many times.


GMT is primarily a raw material supplier and the majority of our volume is shipped in sheet or roll goods form. However, we do have additional capabilities to further process our roll goods, such as slitting, die cutting, forming and light fabrication.
View Complete Details

Steel Wool Reels

GMT offers 8 ranges of thickneess (called grades) of low carbon steel wool for a variety of applications.
Gentle Abrasiveness: Steel wool does not scratch like grit-based abrasives.
Steel wool planes a surface.
Consistent grading is available.
Available in 5 pound reels, 6 per case in all grades (30 pounds)
Available in 20 pound reels 3 per case in all grades (60 pounds)
All reels are approximately 12" Thick, 4 " wide wound on to a cardboard core.
View Complete Details

Private Label Soap Pads

Global Material Technologies is the leading producer of private label soap pads in the world. A proven product for scouring pots and pans, cleaning kitchens and appliances, scouring tough stains on hard surfaces like glass, tile, stainless steel and porcelain surfaces.
View Complete Details

Gaskets

A nonwoven metal fiber felt that presents unique properties suitable for the production of gaskets. We offer a sintered, porous, monolithic skeletal substrate for gasketing and sealing applications.

Benefits:
Thermal Conductivity: Due to the metal properties from which our media is constructed, the monolithic state of the porous matrix, and high surface area of contact at the sealing surfaces, gaskets reinforced with GMT materials exhibit high thermal conductivity through the sealing surface. We have the capability to offer this material in the form of sheets, roll goods, or die-cut to specification.

Electrical Conductivity: In certain applications it may be desirable to impart electrical continuity through a sealing surface. The monolithic metallic nature of GMT gasket textiles are perfectly suited to allow for significant metal content at the interface surface and maintain electrical continuity through the gasket.

Physical Properties: Sintered metal fiber structures can be as low as 5% density, yet due to the high bond strength between fibers imparted by the sintering process, mechanical strength of gaskets can be increased dramatically. Blowout, creep and tearing are virtually eliminated. Like re-bar in concrete, GMT materials can improve gasket performance by many times.


GMT is primarily a raw material supplier and the majority of our volume is shipped in sheet or roll goods form. However, we do have additional capabilities to further process our roll goods, such as slitting, die cutting, forming and light fabrication.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Global Material Technologies)
  • Buffalo Grove, IL 60089, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/global-material-technologies/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0008457984{main}( ).../index.php:0
20.02022023304include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.03132745920include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03943681624header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice