Other Products / Services #4728990

Acid hose, chemical suction & discharge hose must not be used at temperatures and pressures above those recommended by the manufacturer. All operators must be thoroughly trained in the care and use of these hoses and must at all times wear protective clothing. A hose system failure could cause the release of a poisonous, corrosive or flammable material. When handling easily contaminated or hazardous materials it is critical to select the proper hose. Never allow chemicals or acids to drip on the exterior of a hose or allow hose to lay in a pool of chemicalsacids since the hose cover may not have the resistance of the tube. Should a corrosive material come in contact with the reinforcing material, early failure could result. EXTREME CARE MUST BE TAKEN WHEN FLUSHING OUT A CHEMICAL OR ACID HOSE WITH WATER, SOME CHEMICALS, SUCH AS CONCENTRATED ACIDS, MAY REACT WITH WATER AND CAUSE SPATTERING WHICH COULD RESULT IN SERIOUS INJURY TO EYES OR OTHER AREAS OF THE BODY. When flushing a hose, disposal of the effluent must be made in such a manner that environmental problems are not created. We offer a variety of tube and covers for the many chemical and acids used.

Standard rubber corrugated matting18" thick and 14" thick solid rubber corrugated matting. A durable corrugated rubber runner engineered for maximum service and long wear. Has a smooth back finish. An all-weather product. Will not curl shrink or separate. Cleans easily and quickly, promotes clean-lines. Good abrasion resistance and sound absorbing. Comes in 24 inch, 36 inch, 48 inch and 72 inch wide rolls of 25 yards and 50 yards. Black in color. ASTM Switchboard insulating matting: A corrugated all-rubber insulating matting specially compounded for use as a floor covering for protection of workers. It is expressly designed to protect workers against electrical shock when working around high voltage apparatus within the product specification. Conforms to ANSIASTM D 17881 type 1 class 2. Proof tested at 20, 000 volts AC. Maximum recommended use voltage is 17, 000 volts. Dielectric strength 30, 000 volts AC. Permanently branded on the back. Also conforms to OSHA regulations. Ref>29CFR 1910, 137 and 29 CFR 1910.309(b).

Before selecting any protective clothing, footwear or safety work gloves, it is necessary to determine the nature of the protection required. The principle factors to determine protection require: 1) functional requirements, 2) construction or how the article is manufactured, 3) probability and nature of exposure to chemicals, 4) degree of toxicity of the chemicals and 5) relevant properties of protective clothing, footwear and gloves to the chemical hazards involved. Functional requirements may include style and fit to accommodate the type of working activity involved.

STAINLESS STEEL BRAID SMOOTH BORE HOSE PTFE LINED White or black antistatic PTFE available 18" ID to 1-12" ID. High pressure rated. The most flexible hose of its kind. Fittings: 316L stainless steel standard. Temperature rated: -100 degrees F to +500 degrees F.

We offer the most extensive line of sheet rubber in the industry. Our top quality products are made with the most precise ingredients. Everything in rubber sheeting including SBR, natural, nitrile (Buna-n) neoprene, butyl Viton (registered trademark Du Pont), Hypalon (registered trademark Du Pont) Silicone and FDA materials. Hypalon (registered trademark du pont) Silicone and FDA materials. Our rubber sheets meet or exceed ASTM specifications. Durometers from 15 Duro shore A to 90 duro shore A. Thickness from 132" up to 2" in slab form. Fabric reinforced for high pressure applications. NON OIL RESISTANT SHEET RUBBER: Natural rubber (pure gum) 35-45 duro, 3400 PSI tensile, 600% Min. elongation. ASTM D2000 AA 430 NaturalSBR cloth finish drum cured red rubber sheet. 70-85 duro, 800 PSI tensile, 150% Min. elongation. ASTM D1330 Gr. 11 EDPM sheet that provides outstanding resistance to weathering, ozone and UV exposure, Black smooth finish 55-65 duro, 1700 PSI tensile, 400% Min. elongation. ASTM D2000 3BA 615 B13 C12. COMMERCIAL GRADE OIL RESISTANT NEOPRENE SHEET:Neoprene blend CRNBRSBR black 50-60 duro 1000 PSI tensile smooth finish, 300% Min elongation. ASTM D2000 BC 608 Nitrile oil resistant sheet, will work well in oil, solvent and fuels. 55-65 duro, black smooth finish, 2000 PSI tensile, 400% Min. elongation ASTM D2000 BF 618 Neoprene Diaphragm sheet, reinforced with high quality square woven duck to provide balance structure. 1 ply through 4 ply depending on overall thickness. Black smooth finish 1500 PSI tensile, 300% Min. elongation. ASTM D2000 2BF 615 E034. VITON (registered trademark Du Pont) Excellent resistance to heat and oil combinations, hot greases found in engines and compressors and a wide range of concentrated acids. SILICONE has excellent properties for both hot and cold temperatures extremes, excellent weathering properties, resists ozone and oxygen attack.

White tube food suction hose & discharge sanitary hose is a high grade, premium quality suction and discharge hose designed for a variety of food applications. Dual helix designed offers full vacuum capabilities. Lightweight construction offers excellent flexibility for handling ease. All purpose abrasion resistant cover provides excellent protection against oily foods, mild chemicals and ozone. Manufactured on stainless steel mandrels for an ultra-smooth bacteria free tube that will not impart taste or odor. Meets FDA, USA, PMO and 3A requirements. Tube: Extruded white Nitrile or ButylTemperature: Nitrile -40 degrees F to 180 degrees FButyl -40 degrees F to 225 degrees F

Oil suction and discharge hose: designed for heavy duty use, this lightweight flexible oil transfer hose is used for in-plant or tank trunk applications to transfer petroleum products. Smooth interior, highly oil resistant to handle gasoline, diesel, oil and petroleum products having an aromatic content of 50%. May be used at full suction in addition to specified discharge pressures.

Conveyor belts have two basic components: the carcass, or strength member, and the rubber, which protects the carcass. Most conveyor belt carcasses are produced from fabrics that use polyester or nylon fibers, or a combination of the two. These fabrics are completely resistant to the deteriorating effects of moisture, and are resistant to most chemicals. The inherent strength of the fabrics give exceptional resistance to cutting and snagging by abrasive or gritty materials, and retain their strength indefinitely.

We offer the most extensive line of sheet rubber in the industry. Our top quality products are made with the most precise ingredients. Everything in rubber sheeting including SBR, natural, nitrile (Buna-n) neoprene, butyl Viton (registered trademark Du Pont), Hypalon (registered trademark Du Pont) Silicone and FDA materials. Hypalon (registered trademark du pont) Silicone and FDA materials. Our rubber sheets meet or exceed ASTM specifications. Durometers from 15 Duro shore A to 90 duro shore A. Thickness from 132" up to 2" in slab form. Fabric reinforced for high pressure applications. NON OIL RESISTANT SHEET RUBBER: Natural rubber (pure gum) 35-45 duro, 3400 PSI tensile, 600% Min. elongation. ASTM D2000 AA 430 NaturalSBR cloth finish drum cured red rubber sheet. 70-85 duro, 800 PSI tensile, 150% Min. elongation. ASTM D1330 Gr. 11 EDPM sheet that provides outstanding resistance to weathering, ozone and UV exposure, Black smooth finish 55-65 duro, 1700 PSI tensile, 400% Min. elongation. ASTM D2000 3BA 615 B13 C12. COMMERCIAL GRADE OIL RESISTANT NEOPRENE SHEET:Neoprene blend CRNBRSBR black 50-60 duro 1000 PSI tensile smooth finish, 300% Min elongation. ASTM D2000 BC 608 Nitrile oil resistant sheet, will work well in oil, solvent and fuels. 55-65 duro, black smooth finish, 2000 PSI tensile, 400% Min. elongation ASTM D2000 BF 618 Neoprene Diaphragm sheet, reinforced with high quality square woven duck to provide balance structure. 1 ply through 4 ply depending on overall thickness. Black smooth finish 1500 PSI tensile, 300% Min. elongation. ASTM D2000 2BF 615 E034. VITON (registered trademark Du Pont) Excellent resistance to heat and oil combinations, hot greases found in engines and compressors and a wide range of concentrated acids. SILICONE has excellent properties for both hot and cold temperatures extremes, excellent weathering properties, resists ozone and oxygen attack.

Before selecting any protective clothing, footwear or safety work gloves, it is necessary to determine the nature of the protection required. The principle factors to determine protection require: 1) functional requirements, 2) construction or how the article is manufactured, 3) probability and nature of exposure to chemicals, 4) degree of toxicity of the chemicals and 5) relevant properties of protective clothing, footwear and gloves to the chemical hazards involved. Functional requirements may include style and fit to accommodate the type of working activity involved.

Before selecting any protective clothing, footwear or safety work gloves, it is necessary to determine the nature of the protection required. The principle factors to determine protection require: 1) functional requirements, 2) construction or how the article is manufactured, 3) probability and nature of exposure to chemicals, 4) degree of toxicity of the chemicals and 5) relevant properties of protective clothing, footwear and gloves to the chemical hazards involved. Functional requirements may include style and fit to accommodate the type of working activity involved.

Standard rubber corrugated matting18" thick and 14" thick solid rubber corrugated matting. A durable corrugated rubber runner engineered for maximum service and long wear. Has a smooth back finish. An all-weather product. Will not curl shrink or separate. Cleans easily and quickly, promotes clean-lines. Good abrasion resistance and sound absorbing. Comes in 24 inch, 36 inch, 48 inch and 72 inch wide rolls of 25 yards and 50 yards. Black in color. ASTM Switchboard insulating matting: A corrugated all-rubber insulating matting specially compounded for use as a floor covering for protection of workers. It is expressly designed to protect workers against electrical shock when working around high voltage apparatus within the product specification. Conforms to ANSIASTM D 17881 type 1 class 2. Proof tested at 20, 000 volts AC. Maximum recommended use voltage is 17, 000 volts. Dielectric strength 30, 000 volts AC. Permanently branded on the back. Also conforms to OSHA regulations. Ref>29CFR 1910, 137 and 29 CFR 1910.309(b).