H & R Parts, Inc.

United States

• Dimensions for shipping:2 1/2 feet High, 3 feet Wide, 9 feet Long
• Model4V8616
• Weight1,000 lbs.

The lower pin hole bushings for the bucket pins, may need to be replaced. The pin boss surfaces fior the bucket pin holes, have some wear, especially on the inner surfaces (see photos). All of the other pin holes appear to be in decent shape and no cracks have been found.

• Model Number6W9675
• Weight for Shipping1,450 lbs.
• Dimensions for Shipping2 ft. High, 3 ½ ft. Wide, 9 ft. Long

Machine Manufacturer: Caterpillar Machine Model: IT28B Machine #: 3657 Machine Serial Number: 1JK00467 Stock Number: 183836 Type of Boom (Standard, Hi-Lift, IT, etc.): IT (Integrated Toolcarrier) Boom Notes Condition of Pin Holes: All of the pin holes are in good shape and are holding bushings. Condition of Surfaces Around Pin Holes: The surfaces surrounding both of the lower coupler pin holes, have a little wear into them. Condition of Boom Arms: The RH boom arm appears to be bent inward a bit, from the cross tube to the coupler pin hole. RepairsModifications: None. CracksDamage: See boom arm above.

• Blade Height3 ft. High to the top of the moldboard. 5 ft. High to the top of the debris guard.
• Dimensions for Shipping4 ft. High, 7 ft. Wide. 13 ft. Long
• Witdh12 ½ ft. (Approx.)
• Weight for Shipping4,000 lbs.

Attachment Evaluation Dozer Blade Evaluation Machine Manufacturer: Caterpillar Machine Model: D6R LGP Machine #: 3523 Machine Serial Number: 9PN01775 Stock Number: 155828 Blade Information Type of Blade (Straight, Semi-U, Full-U, Angling, etc…): Straight Blade Blade Width: 12 ½ ft. (Approx.) Blade Height: 3 ft. High to the top of the moldboard. 5 ft. High to the top of the debris guard. Blade Manufacturer: Blade Notes Condition of Pin HolesTrunnion Ball Sockets: The pin holes for the LH upper strut have some wear. All of the "Ball Trunnions" and sockets appear to be in decent shape. Condition of Moldboard (note the amount of wear back towards all cutting edge & corner bit bolt holes): There are some dents in the moldboard face and there is a hole and a few cracks on the RH side of the face. Both lower front side edges are cracked as well. The bottom of the moldboard appears to be in decent shape. A debris guard has been added to this blade at some point and it is bent rearward on the LH side. Condition of Cutting EdgesCorner Bits: The cutting edges appear to be in decent shape and the corner bits have a bit of wear. Condition of Blade ArmsAngling FrameStruts: The blade arms look to be in decent condition. Condition of any Hydraulic Cylinders (Tilt, Angling, etc.): The working condition of the blade tilt cylinder is unknown. RepairsModifications: Debris guard added to the top of the blade. CracksDamage: As mentioned above concerning damagecracks on the moldboard.

• Model NumberD5H XL
• Dimensions for Shipping48" X 128" X 16"
• Weight for Shipping2,787LBS

Attachment Evaluation Dozer Blade Evaluation Machine Manufacturer: CATERPILLAR Machine Model: D5H Machine #:3862 Machine Serial Number: 8RJ-05190 Stock Number: 183613 Blade Information Type of Blade (Straight, Semi-U, Full-U, Angling, etc…): SEMI-U Blade Width: 128" Blade Height: 48" Blade Manufacturer: UNKNOWN Blade Notes Condition of Pin HolesTrunnion Ball Sockets: GOOD (COULD USE A LIGHT SAND) Condition of Moldboard (note the amount of wear back towards all cutting edge & corner bit bolt holes): GOOD - LIGHT WEAR Condition of Cutting EdgesCorner Bits: GOOD - LIGHT WEAR Condition of Blade ArmsAngling FrameStruts: GOOD Condition of any Hydraulic Cylinders (Tilt, Angling, etc.): ONE CYLINDER HAS BAD CHROME RepairsModifications: NONE CracksDamage: NONE

• Model Number2183403
• Dimensions for Shipping5 ft. High, 3 ft. Wide, 32 ft. Long
• Weight for Shipping8,760 lbs.

Attachment Evaluation Excavator Boom Machine Manufacturer: Caterpillar Machine Model: 330C MH Machine #: 4000 Machine Serial Number: D3C00310 Stock Number: 191513 Boom Information Working Length of Boom: 30ft., 2 inches Type of Boom (Standard, Material Handler, Mass, etc…): Material Handler Boom Notes Condition of Pin Holes: All of the pin holes appear to be in good shape and are holding bushings. Condition of Surfaces Around Pin Holes: All of the surfaces appear to be in good condition. RepairsModifications: None found. CracksDamage: None found. Other (Tag Info, etc.): The info on the attached tag is as follows:

• Model Number0876439

UNDERNEATH SIDE OF BOOM HAS BEEN PLATED OVER A MAJOR CRACK WORKING LINK = 255 12" WITH 4" PIN HOLES ALL PIN HOLES ARE IN GOOD COND. SEE PICS. SHIPPING- 22' LONG , 3' WIDE , 6' HIGH.