Pre-programmed, easy to use, LCD computer controlled, main control panel. Controls output speed, shot timer, tank mixers, purge time, and tank temperature.
RAPIDSHOT is a low cost, handheld, two component dispensing system specifically designed to dispense Hapcos products. RAPIDSHOT uses convenient 400 ml disposable plastic cartridges and disposable RAPIDSHOT mixers. These cartridges are easily filled using the proprietary cartridge stand and can be easily resealed and stored after use.
The X-11 Molding Chamber is a pressure tank and heating unit combined into one, high quality design. Assembled in our Hanover, MA facility, these chambers were designed to aid the liquid molder in creating a perfect part every time. The combination of heat and pressure will help to ensure bubble-free castings and reduce final cure time by days.
The X-Vac is a portable, custom fabricated, steel vacuum chamber, ergonomically designed for the degassing of Hapcos liquid products. Unlike many vacuum chambers on the market, the X-Vac can fit up to two 5-gallon containers at one time!
RAPIDFIL is a portable, LCD computer controlled, 2 component resin dispensing machine. RAPIDFIL is assembled in-house and can be customized to meet your projects unique requirements.
RAPIDFIL has two easy access service panels, one on each side. One side is drive system access and the other is the tank shutoff and drain valve access. The drive system is belt driven for continuous, smooth, quiet operation. The ratio is determined by the size of the sprockets on each side. Each tank has a main shut off valve and a 14 turn ball valve with a drain hose for draining the tanks.
Combines vacuum, heat, and agitation for quick and efficient degassing of materials. The tanks are color coded and fully insulated with a nylon reinforced vinyl covering. There are individual fluid meters, thermometers, and dessicant dryer systems for each tank. Customize with 6 or 12 gallon vacuum stainless steel tanks for parts A & B.(Vacuum pump not included)x
The dispensing gun features a comfortable and easy to use design. All mixing is external for quick and easy maintenance, with 2 liquid hoses and an electrical harness on the inbound side (the feed side). On the outbound side (nozzle side) there is a threaded protrusion and 2 output ports. The trigger of the gun is equipped with a safety lock. The gun and hose are supported by a flexible counter balance system which can be floor or machine mounted. This arm can move in virtually any direction and can reach molds up to 7 feet away.
The dispensing gun features a comfortable and easy to use design. All mixing is external for quick and easy maintenance, with 2 liquid hoses and an electrical harness on the inbound side (the feed side). On the outbound side (nozzle side) there is a threaded protrusion and 2 output ports. The trigger of the gun is equipped with a safety lock. The gun and hose are supported by a flexible counter balance system which can be floor or machine mounted. This arm can move in virtually any direction and can reach molds up to 7 feet away.
United States
