Hart Technologies, Inc.

Engine Component Inspection • Blades, disks, IBRs, holes, etc. • NDT of Complex Structures (per ASTM E2884-13 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays, ASTM International, Book of Standards, Vol. 03.03.) • Surface breaking and subsurface cracks • Hidden corrosion • Coating Characterization without need of expensive custom calibration standards (per ASTM E2338-11 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards, ASTM International, Book of Standards, Vol. 03.03.) • Complex Shaped Surfaces • Firtree slots in engine disks, fillets in aircraft structures, etc. • MaterialsProcess Quality Characterization

• SeriesGridStation IN8200

Nondestructive Testing for SCC Crack Mapping and Depth Sizing MWM-Array Scanners for SCC Detection through Coatings  Wide-area scanning arrays for preliminary screening of SCC through coatings (coal tar wrap, epoxy, etc.)  Scan rates over 20 sq. ft.min (1.86 m2 ) using JENTEK’s GridStation 8200 instrumentation MWM-Array Scanners for High-Resolution SCC Crack Mapping & Sizing  High-throughput C-Scan imaging of discrete cracks andor SCC colonies  Conformable MWM-Array eddy current sensors configurable for wide range of pipe diameters  Minimal surface preparation requirements (not affected by coatings, moisture and dirt) Crack Depth Software Module – JENTEK GridStation Software  Rapid conversion of MWM-Array response into depth measurements  Automatic crack interaction capability  Electronic storage and retrieval of measurement data (as potential MPI replacement)  Microsoft Windows™ environment with GridStation software for quick and easy report generation

• Pipe MaterialCarbon steel, including ASTM A106, ASTM A53, and API 5L.
• Pipe Wall ThicknessUp to 0.5 inch
• Insulation Type & Thickness3.0 inch (max) of any non-conducting insulation material
• Detection Threshold1 in. diameter at 65% wall loss (average) 2 in. diameter at 50% wall loss (average) 3 in. diameter at 30% wall loss (average) Based on 0.250" pipe wall, 2 inch insulation, aluminum WJ. Detection performance will vary due to pipe wall thickness, insul

The Leader in Eddy Current Testing PerformanceFast Corrosion Imaging for Piping, Vessels & Column Inspection  Light weight, ideal for rope access crews  Manual scanner with encoded C-scan imaging JENTEK Sensors recommends the non-integrated system (IN8200) for field services and the integrated system for special applications in the laboratory, or in certain situations where having an integrated version is preferred.

Test Manager - A highly functional test tool suite which enables the design, creation, and execution of interactive and automated test cases. Test Manager accelerates the verification process from initial planning through final validation and life-cycle support. thumbnailTest Manager includes a powerful graphical interface used to record and link design criteria to testing requirements. This capability allows the user to inter-relate requirement information to the appropriate sequence of test steps and qualifications points necessary to verify the expected performance of the system. The reporting and data mining features of Test Manager provide instant access to a comprehensive set of test planning and performance metrics, based on user defined Meta data including safety critical tags and requirements traceability on a step by step basis. Test Manager extends the enterprise level capabilities of Test Manager with the inclusion of automation framework, which provides the capacity to design and implement computer assisted test automation based on the execution of carefully prepared test scenario scripts. At run time, parameters defined in a test scenario to perform a planned sequence of activities and steps while recording selected performance data as the test proceeds. The recorded data is automatically evaluated and displayed to provide immediate feed back to the test operator.

• Instrument Power11.5-18V DC External PoE power adapter provided (runs off of 100-240V, 50-60 Hz AC)
• Encoders2
• Weight<1 lb. (Power over Ethernet configuration)

JENTEK Founded in 1992 • JENTEK Core Competencies Model-Based Inverse Methods, Electronics Design, NDTNDENDI, SHM • JENTEK focus is improving safety and quality while delivering high ROI • MWM-Array • Winner FAAATA “Better Way” Award • National Tibbets Award • ASNT Best Paper Award • U.S. Navy Phase III Commercialization Award • FAA approved for some engine inspections • U.S. Navy Standard practice for engine inspection • Implemented on Space Shuttle Leading Edge at NASA KSC • Proven to provide improved inspection performance using model based multivariate inverse methods (MIMs) • GridStation Software and HyperLattice based MIMs • Intuitive operator interfaces • Inherent self-diagnostics • C-Scan imaging of multiple properties simultaneously (e.g. first and second layer corrosion, or coating conductivity and thickness) • Convenient procedure and data management