Post Buy Requirement
HC
United States
Add Review

Our Products

HEXCEL Glass

The F161 Prepreg is a structural, heat resistant, and electrical grade epoxy designed for autoclave curing. It is a high temperature, laminate grade epoxy resin with a 350oF cure. This material is especially unique because it meets all types and classes of the MIL-R-9300B* specification.
View Complete Details

Surface Pre-Treatment

The 3M Surface Pre-Treatment AC-130 is a high-performance surface preparations for adhesive bonding. This sol-gel surface preparation is for adhesive bonding of aluminum alloys, steel and titanium. With a quick processing time this surface prep is ideal for composite repairs.
View Complete Details

Custom Blanket Quote

The need for custom shaped, flexible heat blankets in composite repair has increased dramatically in recent years with all of the emerging applications being performed.

HEATCON has both the experience and dedication to meet your custom heat blanket requirements from design to delivery.

Simply supply us with the details listed below, and well begin designing the blankets to suit your specific needs. Reference the Specifications tab below for required information to build your custom heat blanket.
View Complete Details

Pre Formed Honeycomb

Aluminum Alloy Core 5052, Fiberglass Fabric-reinforced Core(HRP), Aramid Fiber-reinforced, Core(Nomex) (HRH), and other core types.Aluminum Alloy Core 5052, Fiberglass Fabric-reinforced Core(HRP), Aramid Fiber-reinforced, Core(Nomex) (HRH), and other core types.
View Complete Details

Heat Blanket

4in x 10in (10.6cm X 25.4cm), 120V, 200 WATTS

Our Silicone rubber heat blankets are specifically designed for the repair of composite structures using vacuum bagging techniques. The unique construction of our heat blankets allows you to apply uniform heat exactly where you want it. Our design employs a grid of wound resistance wire vulcanized between two layers of fiberglass reinforced silicone rubber. This design features strength, flexibility, durability and even heat distribution.
View Complete Details

STRETCHABLE BLANKETS

  • Maximum Temperature – 450°F (232°C)
6in x 6in, 220V, 180 watts

Our Stretchable Silicone rubber heat blankets are specifically designed for the repair of complex 3-dimensional composite shapes or contoured surfaces. The unique construction of our stretchable heat blankets allows you to apply uniform heat exactly where you want it. Our design employs a grid of wound resistance wire vulcanized between durable unsupported silicone rubber. This design features strength, flexibility, durability and even heat distribution.
View Complete Details

Release Fabric

  • Roll Size: 38in x 100yds (96.52cm x 91.4m)
RELEASE, TEFLON, POROUS, .002 (2 MIL), 37.5 WIDTH

The HCS2103-P Release Fabric is a porous release Tefl on coated fiberglass. The porosity is always the same; the release coating does not vary from roll to roll and will release from all commercial resin systems. Teflon Coated FiberglassPorous Release Fabric is used as a release ply that allows out gassing of volatiles during processing. It is generally used for high temperature 350F (177C) applications.
View Complete Details

Breather Cloth

CLOTH, BREATHER, 10 OZ, 60 WIDTH

The HCS2102 Series BreatherBleeder Cloth is a needlepunch polyester breather system commonly used as a vacuum transfer medium in the vacuum bagging process. It can be used at pressures up to 85psi (5.8 bars). The HCS2102-04 cloth can be used at pressures up to 200psi (13.8 bars). Multidirectional conformability make it a very efficient breather. This cloth does not contain any binders which could seal off air flow. The breather is required for air evacuation and the bleeder system is required to absorb excess resin. Recommended maximum use temperature: 400F (204C).
View Complete Details

Urethane Adhesive

Learn More
The 3M Scotch Weld EC-3587 BA Class B-14 is a two-part polyurethane that cures at room temperature or with heat to a tough, impact-resistant material. It has excellent adhesion to many metal and plastic substrates.

The EC-3587 Class B-14 has a worklife of 5-20 minutes at 73F (23C). It can be used as structural adhesive, void filler, or as a fairing compound.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Heatcon Composite Systems)
  • Seattle, WA 98188 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/heatcon-composite-systems/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0008457720{main}( ).../index.php:0
20.01942014784include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.12772737368include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.13303673072header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice