Heskins LLC

Microprismatic tape is a reflective tape with very high retroreflective values. Suitable for application to objects where visibility needs to be increased. The reason for the high-performance levels is the retro-reflective surface created by man-made 3 point prisms, which return 80% of the light directly back to the source, making this a much higher performing material. So much so that it has a 5 year retro-reflective performance. It is an engineering grade prismatic tape, commonly referred to as EGP reflective tape. The name is applied due to microprismatics use as a high-performance reflective tape in warehouses and factories. Unlike our DOT ( Department of Transport ) materials, micro prismatic tape does not carry a certification stamp, enabling it to be used for signage, vehicle wraps and barriers. Microprismatic tape is suitable for applying to static objects such as posts, barriers and life jackets, as well as mobile objects such as boats, heavy machinery and motorcycles. Sewing it to clothing to increase visibility is also an excellent use.

the non slip fabric is a great and inexpensive product to prevent slippage of objects. At present we produce three different grades, all with diverse non skid properties. All anti slip fabric materials are produced in the same method using the same construction process; A polyester mesh is constructed, the shape of the mesh and the gap between strands will determine the ultimate appearance of the fabric. The polyester mesh provides the strength and stability that the soft upper needs. The polyester mesh is wound onto huge master reels, the reels are then loaded onto an offwind bar. The polyester mesh is passed through a warm bath of liquid, non slip plastic foam, the liquid forms on the mesh. The now non slip mesh (now a fabric) passes through a low bake oven. The oven helps to solidify the mesh, however, the plastic retains its foamed properties. The type of plastic used, dwell time in bath etc all determine the end thickness and density.

Heskins conformable traction tape is perfect for applying onto an irregular surface such as diamond treads also known as checker plate or diamond plate. If you have an irregular surface, you need a product that can cope with the intricacies of this demanding application. Diamond tread can be a very dangerous surface; it is potentially lethal when wet, creating a greater risk of slips. The levels of grip can also be very low; this is measured in Coefficient of Friction or (COF). Applying conventional traction tape does not work successfully, since the peaks and valleys result in stretching of the plastic film. Thus when applied into the valleys it will want to revert to its original flat state, this will then result in the traction tape lifting off the surface and becoming useless. Heskins conformable traction tape has a completely different construction that was designed to work perfectly as diamond plate tape. When compared the conformable anti slip tape seems very similar to a conventional grip tape, but, instead of a plastic base we use a soft aluminum foil base. This ensures the conformable traction tape conforms to the surface properly. As with all of our tapes this must also be applied to a clean dry surface. To apply conformable anti slip tape you simply press the tape onto the surface aligning it correctly and with use of a soft rubber mallet (which we can supply), hit the traction tape so it forms into the shape of the diamond tread pattern, reducing the chance of tears and material failure.

ColorCovers are self adhesive frames to allow you to quickly produce any custom sign in any quantity you require using a standard inkjet or laser jet printer. This allows you to create durable custom signage that will be seen for as long as required. ColorCovers are constructed from a homogenous plastic film with colored frames conforming to OSHA regulations, with clear window in the centre to portray your message with a surface that is slightly embossed for slip prevention during floor use. 4 self-adhesive strips on the back of the colored frames complete the ColorCover, allowing them, when applied, to hold fast. Available in large ( 15.78" x 12.36" ) with a letter size window and small ( 12.36" x 9.92" ) with a half letter size window, and 5 colors, black, white, yellow, green and blue, all of which comply with OSHA regulations. This allows you to include the custom signs in the organisational color coding of your building.

Heskins ranges of nonabrasive tapes are suitable for a variety of applications; such as boats, swimming pools, bathrooms, changing rooms, or anywhere where the surface may be exposed to bare skin. Since it isn’t made from abrasive materials, it will not damage bare skin, and due to its lack of peaks and valleys that abrasive materials feature, it will not harbor bacteria, therefore making it a hygienic & excellent non slip material to use in kitchens and hospitals.

• dimensions4.5”x25” flat or 4.7″x1.7″x25″

Heskins anti slip bolt down plates are useful for areas that are not suitable for anti slip tape application. Constantly wet and loose surfaces will also prevent adhesive from bonding correctly, causing the application to fail. Anti slip bolt down plates remove the possibility of failure from the product by being screwed, bolted or nailed in to the surface itself. We apply a die cut of our anti slip tape, in any grade you would like; we usually apply our standard and coarse anti slip tape to a sheet of aluminum to create our anti slip plates, but if you would like to consider other options, please call us to discuss. The plate itself is made from a weatherproof aluminum, finished with 6 or 8 pre-drilled eyelets and rounded corners, which will not tarnish in foul weather. These 4.5”x25” flat or 4.7″x1.7″x25″ L-shape anti slip bolt down plates, once applied, can be left permanently if required.