Honeyville Metal

Honeyville has 10 sizes of High Efficiency High Volume ("HEHV") cyclones available for applications where maximum efficiency is required. The tall body and steep cone design assures a faster drop of material to the cone outlet. Honeyville HEHV cyclones feature the following: MATERIAL: Body and cone constructed of heavy gauge, welded hot rolled ("HR") carbon steel. The cyclone is flanged at the mid-section to bolt together at the job site. Optional Materials: Abrasion Resistant ("AR") Steel, G90 Galvanized Steel, and Stainless Steel INLET: 135° scroll involute inlet to move material past the interior conical baffle. VENT: Low velocity tangential vent outlet for less air turbulence. EXTERIOR SURFACE: The exterior for cyclones made with HR or AR steel are finished with a base primer coat followed by industrial alkyd enamel paint. CONE ACCESS DOOR*: 14" diameter, bolt-on panel, flush with the inside surface. *Standard on all cyclones 36" and larger. Optional 20" door panel is available

• Series5 sizes

Honeyville has 5 sizes of High Efficiency ("HE") cyclones. The HE cyclones are similar to the Standard Series cyclones, but on a HE cyclone the straight side and cone heights are greater for increased material separation. In addition, the HE cyclones have a helical baffle between the straight side and inner vent tube to better direct the material down. MATERIAL: All welded hot rolled ("HR") carbon steel with butt seam construction Three gauge thickness classifications available: Standard Duty, Heavy Duty, and Extra Heavy Duty Optional Materials: Abrasion Resistant ("AR") Steel, G90 Galvanized Steel, and Stainless Steel VENT: Each cyclone has a flanged vent for use with an Adjustable Vent Cap or a Return Air Manifold. ROOF: All sizes over 30" diameter have a 15 degree conical roof for greater vent tube stability. SAFETY RING: On MH36-HE and larger sizes, a safety ring mounted at roof edge is standard. EXTERIOR SURFACE: The exterior of cyclones made with HR or AR steel are finished with a base primer coat followed by a industrial alkyd enamel paint. CONE ACCESS DOOR*: 14" diameter, bolt-on panel, flush with the inside surface. *Standard on all cyclones 36" and larger. Optional 20" door panel is available.

Baldor's extensive line of General Purpose three phase motors are available in totally enclosed cast iron and industrial steel band for harsh applications. Designed for "general purpose" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. Suitable for mounting in any position Ball bearings Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes EM Super-E® motors have NEMA Premium® efficiency, Class F insulation, 1.15 service factor and 3 year warranty Motors with TR suffix have roller bearings for heavy belted loads

• SeriesHAL SERIES

The HAL Series Rotary Airlocks are available in 5 sizes. The airlocks have a round inlet and a square outlet. PVC sandwich flex-tip wipers are standard on the airlock with optional carbon steel flex-tip limiters for special applications where a rigid seal is needed. The bolt-on side panel allows for easy access to change the PVC tips without removing the rotor.

Honeyville welded pipe is available in sizes from 7" up to 72" diameter. Standard material is 14 Ga. HR carbon steel. Optional materials include Galvanized Steel, Stainless Steel and AR steel in thickness of 16 Ga. through 14". Angle rings are welded solid for an airtight fit when installed properly.

• SeriesHF SERIES
• Inlet Sizes6" to 41"