Post Buy Requirement
HM
United States
Add Review

Our Products

MATERIAL HANDLING FANS

  • Series HF SERIES
  • Inlet Sizes 6" to 41"
HF Series Material Handling Fans are available in 15 sizes and are designed to be used in applications where material goes through the fan. Each HF Series fan conforms to the standards of the Air Movement and Control Association (AMCA) International, Inc.

Honeyville Metal Incorporated certifies that the HF Series Material Handling Fans shown on pages 3-17 of our HF Series Fan Catalog are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

Inlet Sizes - 6" to 41"
Volume - 500 to 58, 500 CFM
Four Duties available* (see charts below for specifications)
Standard Duty (STD): Designed for dry, non-abrasive material with 316" or smaller particulate size.
Heavy Duty (HD): Paddles are 18" thicker than on the standard duty fan. Designed for semi-dry, mildly-abrasive material with 38" or smaller particulate size.
Extra Heavy Duty (XHD): Paddles are 14" thicker than on the standard duty fan. Designed for wet, abrasive material with 34" or smaller particulate size.
Extra Heavy Duty Abrasion Resistant (XHD-AR): Paddles are constructed of 12" AR400F. Designed for wet, highly-abrasive material with 58" or smaller particulate size.
Available Materials of Construction
Hot Rolled ("HR") Carbon Steel
Abrasion Resistant ("AR") 400F Steel
Stainless Steel
Statically and Dynamically Balanced All of the HF Series Fans have the wheels balanced in house on our state of the art balancing machine.
6 Paddles per Wheel* Fans wheels have 6 open paddles with a self-cleaning radial design to minimize buildup.
Motor mounts and drive package are available for all HF Series Fans.
TEFC Motors Available for fans in 3 to 300 hp.
Drain Plug* Installed on units as standard equipment.
Pipe: Blow pipe and suction pipe is available in a variety of materials and sizes.
AMCA Licensed Performance Charts: Available for download for our complete HF Series Fan line.
View Complete Details

Three Phase Enclosed MOTORS

Baldor's extensive line of General Purpose three phase motors are available in totally enclosed cast iron and industrial steel band for harsh applications. Designed for "general purpose" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges.
Suitable for mounting in any position
Ball bearings
Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes
EM Super-E motors have NEMA Premium efficiency, Class F insulation, 1.15 service factor and 3 year warranty
Motors with TR suffix have roller bearings for heavy belted loads
View Complete Details

IRON BULL HOPPERS

Iron Bull Hoppers are a great addition to our Dust Collection Systems. We offer a 3 yard hopper as a standard size, which is approximately equivalent to 11 barrels. Contact us for information regarding additional hopper sizes. The hopper incorporates an easy, quick release tripping mechanism the operator can control from their seat. The uniquely designed hood provides for maximum capacity of the dumpster.
View Complete Details

Welded Pipe

Honeyville welded pipe is available in sizes from 7" up to 72" diameter. Standard material is 14 Ga. HR carbon steel. Optional materials include Galvanized Steel, Stainless Steel and AR steel in thickness of 16 Ga. through 14". Angle rings are welded solid for an airtight fit when installed properly.
View Complete Details

SEAM PIPE

Galvanized lock-seam pipe is manufactured at Honeyville Metal. It is available in 26 gauge up to 18 gauge depending on the diameter of the pipe. We stock lock-seam pipe (slip jointed) from 3" to 20" dia. in 10' lengths. For an additional charge it can be flanged for various applications.
View Complete Details

Welded Elbows

Honeyville's Welded Elbows have a standard centerline radius of 2 times the elbow diameter, with a 7-gore 90 bend or a 4-gore 45 bend. Custom degree elbows are also available.
View Complete Details

Rorary Airlock Valves

  • Series HAL SERIES

The HAL Series Rotary Airlocks are available in 5 sizes. The airlocks have a round inlet and a square outlet. PVC sandwich flex-tip wipers are standard on the airlock with optional carbon steel flex-tip limiters for special applications where a rigid seal is needed. The bolt-on side panel allows for easy access to change the PVC tips without removing the rotor.

View Complete Details

HIGH EFFICIENCY CYCLONES

  • Series 5 sizes
Honeyville has 5 sizes of High Efficiency ("HE") cyclones. The HE cyclones are similar to the Standard Series cyclones, but on a HE cyclone the straight side and cone heights are greater for increased material separation. In addition, the HE cyclones have a helical baffle between the straight side and inner vent tube to better direct the material down.

MATERIAL: All welded hot rolled ("HR") carbon steel with butt seam construction
Three gauge thickness classifications available: Standard Duty, Heavy Duty, and Extra Heavy Duty
Optional Materials: Abrasion Resistant ("AR") Steel, G90 Galvanized Steel, and Stainless Steel
VENT: Each cyclone has a flanged vent for use with an Adjustable Vent Cap or a Return Air Manifold.
ROOF: All sizes over 30" diameter have a 15 degree conical roof for greater vent tube stability.
SAFETY RING: On MH36-HE and larger sizes, a safety ring mounted at roof edge is standard.
EXTERIOR SURFACE: The exterior of cyclones made with HR or AR steel are finished with a base primer coat followed by a industrial alkyd enamel paint.
CONE ACCESS DOOR*: 14" diameter, bolt-on panel, flush with the inside surface.
*Standard on all cyclones 36" and larger. Optional 20" door panel is available.
View Complete Details

HIGH VOLUME CYCLONES

Honeyville has 10 sizes of High Efficiency High Volume ("HEHV") cyclones available for applications where maximum efficiency is required. The tall body and steep cone design assures a faster drop of material to the cone outlet.
Honeyville HEHV cyclones feature the following:

MATERIAL: Body and cone constructed of heavy gauge, welded hot rolled ("HR") carbon steel. The cyclone is flanged at the mid-section to bolt together at the job site.
Optional Materials: Abrasion Resistant ("AR") Steel, G90 Galvanized Steel, and Stainless Steel
INLET: 135 scroll involute inlet to move material past the interior conical baffle.
VENT: Low velocity tangential vent outlet for less air turbulence.
EXTERIOR SURFACE: The exterior for cyclones made with HR or AR steel are finished with a base primer coat followed by industrial alkyd enamel paint.
CONE ACCESS DOOR*: 14" diameter, bolt-on panel, flush with the inside surface.
*Standard on all cyclones 36" and larger. Optional 20" door panel is available
View Complete Details

HBCF NEGATIVE SYSTEM FANS

  • Series HBCF
The HBCF Negative Systems Fans are designed with a backward curve, centrifugal blade for clean air applications. With inlet sizes of 20" through 63" and recommended CFM ratings of 5, 200 to 54, 000, HBCF Fans provide a wide range of options to fit your particular needs.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Honeyville Metal)
  • Topeka, IN 46571 map, United States
  • Share us via