Post Buy Requirement

Our Products

BUSHING MOUNTS

  • Natural Frequency See tables
  • Load Range 0 - 350
  • Resilient Element Natural Rubber
Versatile, low cost elastomeric isolators protect against shock and vibration and reduce structure borne noise. Barry Ring & Bushing isolators consist of an elastomeric ring and elastomeric bushing and are designed to be directly incorporated into the structural components of the equipment to be mounted. Any number of these isolators can be installed in parallel for greater load capacity and may be stacked in series when greater deflection capacity is required.
View Complete Details

Ball Mount

  • [Natural Frequency 10 - 20 Hertz
  • Load Range 0 - 9
Barry Ball Mount Series Isolators are miniature, low-cost isolators that provide medium natural frequency vibration isolation for precision equipment, electronics and office equipment.
View Complete Details

L-MOUNT

  • Natural Frequency 7-10 Hertz
  • Load Range 0 - 40
  • Transmissibility at Resonance 2.5
Low-frequency, highly damped mounts for a high level of vibration isolation. Barry L-Mounts increase equipment reliability and extend component-life by providing isolation for frequencies as low as 10 Hertz and exhibiting low trans- missibility at resonance (below 2.5) with .060" double amplitude vibratory input.
View Complete Details

CUPMOUNTS

  • Natural Frequency 20 - 45 Hertz
  • Load Range 0 - 1800
  • Transmissibility at Resonance 4 max. for HI-DAMP™ version (silicone)
A universal set of mounts for protection from severe shock environments, high-frequency vibration and structure borne noise. Barry Cupmounts combine protection against severe shock with efficient vibration isolation characteristics at frequencies above 40 Hertz. They can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.
View Complete Details

B-MOUNT

  • Natural Frequency 15 - 30 Hertz
  • Load Range 0 - 40
  • Transmissibility at Resonance 3.0 Max.
All-attitude, highly damped mounts for protection of equipment from vibration, shock during steady-state acceleration. Barry B-Mounts provide shock and vibration isolation for avionic equipment in high performance aircraft. They feature low resonant transmissibility and isolate high frequency vibration without snubbing during high "g" maneuvers.
View Complete Details

H-MOUNT

  • Natural Frequency 7-10 Hertz
  • Load Rangeq 0 - 40
  • Transmissibility at Resonance 2.0 Max.
Low-frequency, friction damped mounts for high level vibration isolation and shock protection in rotary wing aircraft. Barry H-Mounts are ideally suited for protecting equipment in helicopters or similar environments where high amplitude, low frequency vibration is predominant.
View Complete Details

Bumpers

  • Natural Frequency 7 - 28 Hertz
  • Load Range 2 - 280
  • Transmissibility at Resonance 8:1
Versatile, low-cost stud type mounts for vibration, shock and noise control, and motion accommodation. Barry Stud Mounts are designed to support loads up to 260 lbs. per mount in compression and up to 70 lbs. in shear. Their simple design and sturdy construction permit their use in a wide variety of industrial applications. Available in 3 styles: (1) Double stud, (2) Bumpers, (3) StudInsert.
View Complete Details

Two Stage Shock Mount

  • Natural Frequency 6 - 8 Hertz vertical 15 Hertz vertical
  • Load Range 1 - 6000
  • Transmissibility at Resonance `2.5 Max. 10 Max.
Two stage shock mount and vibration isolator for severe dynamic environments such as shipboard and ground vehicles. Barry 2K-Series mounts offer the advantage of superior vibration and shock protection for a wide range of loads in a single compact unit. These isolators are ideal for isolating naval sonar equipment, ship board electronics and communications.
View Complete Details

S-MOUNT

  • Natural Frequency 7-10 Hertz vertical
  • Load Range 0 - 45
  • Transmissibility at Resonance 3.5 Max. at sea level Approx. 4.3 at 50, 000 feet
Low-frequency variable air-damped mounts for a high level of vibration isolation. Barry S-Mounts are air-damped isolators and are designed to provide the highest degree of vibration isolation for sensitive commercial and military airborne equipment. S-Mounts are particularly effective at isolating low level vibration.
View Complete Details

T-MOUNT

  • Natural Frequency 15 - 40 Hertz
  • Load Range 0 - 150
  • Transmissibility at Resonance 4.0 Max.
General purpose, all-attitude isolators for mounting aircraft, shipboard or vehicular equipment. Barry T-Mounts are general purpose isolators for mounting aircraft, shipboard or vehicular equipment in any attitude. They are ideally suited for applications requiring high frequency vibration isolation with low resonant amplification.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Hutchinson Aerospace & Industry, Inc.)
  • Hopkinton, MA 01748, United States
  • Share us via