Hydraulics, Inc.

Cylinder Rebuilding Service Your Emergency is our Priority. We offer the Fastest Cylinder Rebuilding Turnaround in the Portland Vancouver Metro Area. What do you need from Hydraulics, Inc.? Quick tear down inspection services Free Pickup & Delivery Time sensitive quotes get priority Rebuilds that last GUARANTEED Service that you can count on until the job is done to your satisfaction Activity tracking history on each cylinder rebuilt and stamped All rebuilt cylinders are tested by two different methods for failure

Hydraulics Inc. offers custom hoses for almost any application. We make the hoses in house and can most times offer same day pickup on our producst

Get all of the versatility and durability for hydraulic, truck, subsea and specialty equipment needs with Eaton Synflex® thermoplastic hoses. As a long-time market leader, Eaton has engineered these lightweight, long-lasting hoses in extraordinary lengths to meet the needs of even the most unique and demanding applications. Synflex hose and tubing products offers flexibility, durability, abrasion resistance, superior chemical resistance, high pressure capability and extended product performance. Addresses these engineering challenges: Low profile design for routing flexibility Swage capable allowing use of existing Synflex assembly equipment Meets or exceeds hose specifications for all available terminal end configurations Engineered to work specifically with Synflex 8, 000 to 10, 000 psi hydraulic hose as a system – ensuring product performance Product Features Significantly better abrasion resistance Enhanced flexibility Improved ease of cutting Increased flow performance Metric sizes Exceeds DIN specifications Technical Information Synflex 90V Fittings Qualified on Synflex 3V10 and 3VE0 hose Available in straight, 45 and 90 degree configurations 316 stainless steel (9CV) available as run-to-order Eaton Synflex - 25CT SAE 100R7 Tube: Polyester Reinforcement: Braided synthetic fiber Cover: Black perforated, non-stick co-polyester Sizes: -08 Fittings: Synflex (903, 90A Stainless) Meets or exceeds SAE 100R7 specifications Constant pressure: 172 bar (2, 500 psi) Temperature range: -540C to +940C (-650F to +2000F) Low volumetric expansion - less than +- 2% Synflex - 3130 SAE 100R7 Tube: Co-extruded tube, Urethane and Nylon Reinforcement: Spiral synthetic fiber (-03 thru -06), braided synthetic fiber (02, -08 thru -16) Cover: Black perforated polyurethane Technical Information Synflex 90V Fittings Qualified on Synflex 3V10 and 3VE0 hose Available in straight, 45 and 90 degree configurations 316 stainless steel (9CV) available as run-to-order Eaton Synflex - 25CT SAE 100R7 Tube: Polyester Reinforcement: Braided synthetic fiber Cover: Black perforated, non-stick co-polyester Sizes: -08 Fittings: Synflex (903, 90A Stainless) Meets or exceeds SAE 100R7 specifications Constant pressure: 172 bar (2, 500 psi) Temperature range: -540C to +940C (-650F to +2000F) Low volumetric expansion - less than +- 2% Synflex - 3130 SAE 100R7 Tube: Co-extruded tube, Urethane and Nylon Reinforcement: Spiral synthetic fiber (-03 thru -06), braided synthetic fiber (02, -08 thru -16) Cover: Black perforated polyurethane Sizes: -02, -03, -04, -05, 06, -08, -12, -16 Fittings: Synflex (903, 90A Stainless, 9C6 Brass) , Polyon, TTCZ-Series with sleeve, and U-Series Meets or exceeds SAE 100R7 specifications Maximum operating pressure: 69 to 207 bar (1, 000 to 3, 000 psi) Temperature range: -400C to +1000C (-400F to +2120F) Low volumetric expansion - less than +- 2% Synflex - 3VE0 Tube: Co-extruded, Nylon lined Reinforcement: Spiral, high-tensile aramid fiber Cover: Orange, non-perforated polyurethane Sizes: -03, -04, -06 Fittings: Synflex (90V, 9CV Stainless) Maximum operating pressure: 552 to 689 bar (8, 000 to 10, 000 psi) Temperature range: -400C to +1000C (-400F to +2120F) Low volumetric expansion - less than +- 2% SAE J517 non-conductive hose construction

The term Dielectric Bucket Truck Testing is a contraction for high potential, which means high voltage testing. Hi-pot testing has more commonly been further shortened to Dielectric Bucket Truck Testing which becomes a widely accepted term for the process for applying high voltage to a device in order to determine the status of its electrical insulation. Although Dielectric is a commonly used word, there are many it has many terms with similar or identical meanings. Voltage withstand testing, dielectric strength testing and insulation breakdown testing and are popular terms synonymous with Dielectric Bucket Truck Testing. Dielectric Bucket Truck Testing uses either an AC or DC stimulus voltages dependent on the test specification. The Dielectric Bucket Truck Test is the most popular form of electrical safety testing. Products which operate from line voltage often require production line Dielectric Bucket Truck Testing on a 100% basis. Besides hi-pot testing, ground bond testing and insulation resistance testing are also often required. The test voltage for Dielectric Bucket Truck Testing is usually specified by the applicable safety standard. As a general rule, the Dielectric Bucket Truck test voltage is twice the line voltage plus 1000 volts. Typically Dielectric Bucket Truck Testing is conducted for a specified time period, for example 1 minute. Many times standards will permit a reduction of the Dielectric Bucket Truck Testing period, to as little as one second, when the test voltage is increased. For more information on our Crane Inspection services

• Series4S/6S Series

This new series of spiral hose fittings incorporate three major advancements to provide a robust, practical and complete engineered hose assembly system. The "4S6S" name refers to the 4-spiral and 6-spiral wire reinforcement of the hose approved with the respective "4S" and "6S" series fittings. The 4S6S Series of spiral hose fittings are applicable for use in high pressure hydraulic systems found in mobile machinery and equipment, mining, metals and minerals, oil and gas, machine building, and vehicles markets. Hydraulic hose is commonly specified in the above markets by industry specification (SAE EN) or operating pressure. Product Features Dura-Seal™ Technology Higher impulse cycle life performance Class 0 Cool-Down Leakage per SAE J1176 when hoses are assembled with the 4S6S spiral hose fitting series Dura-Kote™ Plating Technology with superior corrosion resistance Hose fittings that offer three times the corrosion protection on carbon steel fittings as compared to competitive hose fittings Eaton‘s Dura-Kote protected hydraulic fittings provide up to 1000 hours of corrosion protection, resulting in longer assembly life in harsh environments MatchMate Spiral - Engineered hose assembly system that matches the correct hose and hose fitting approved to be assembled together.

Crane Inspections Annual Crane Testing Our Employees are Certified Crane Inspectors Tested By the Non-Profit Crane Certification Association of America 0-100 Ton Crane Certification Accreditation Types of Cranes we perform inspections: Digger Derricks Knuckle booms Boom Trucks Sign Trucks Lattice Cranes Platform Trucks Carry Decks Mobile Telescopic Hot sticks Utility Bucket Truck Man Lifts Auto cranes We are federally and state regulated to perform these tests. Our forms we use and costs to perform these tests are a phone call away. Please call our staff with your questions. We are very competitive on our pricing, but our service is second to none.