Inb Thermoelectric

United States

INB Liquid Chillers incorporate efficient liquid heat exchangers with minimal Thermal Resistance. Our Liquid chiller assemblies use large-surface cold plates, and achieve low resistance due to their extensive internal surface area. These exchangers allow the cooler to lower the temperature of any liquid very quickly. Liquid Coolers are custom designed from 50 to 500 BTU, depending on the desired cooling capacity. A variety of Thermoelectric Modules ( Peltiers) are used to achieve the desired temperature differential and cooling power. INB 280-12-LA INB 700-HATRWC WAtronix, Inc. is a global supplier of high-quality thermoelectric equipment. Our competitive prices and wide selection allow you to choose the best quality product without sacrificing workmanship or technological innovation.

The Dual Action Thermoelectric Controller is a fully self-contained, turn-key system designed to control a thermo-electric module in either heating or cooling mode. The controller automatically and seamlessly switches the polarity of the applied voltage to the module to provide heating or cooling as needed to maintain a desired temperature. The controller contains all the necessary hardware to power and control a TEC module, including the power supply used to power the TEC module, and a thermocouple jack to accept the TEC module�s feedback thermocouple. Simply plug the output of the controller to the TEC module and connect the feedback thermocouple, and full control of the TEC is at your fingertips. A standard Eurotherm termperature controller is used as the interface to specify the setpoint and other programmable parameters. This allows a temperature profile to be programmed specifying parameters such as transition rates and dwell times. An external computer can also be used to communicate with the controller. In addition to the polarity switching voltage used to power the TEC module, the Dual Action Controller also provides an unswitched, auxiliary voltage. This can be used to power cooling fans on the TEC module or other accessories. Shown above is the rear of the Dual Action Controller Accepts an input voltage between 90 to 280 VAC. . Provides output power of 320 watts with a voltage of 12 VDC or 24 VDC. . Can accept either Type J, K, or T thermocouples for feedback from the TEC module. . Can allow for external communication through Mod Bus or Bi-Sync standards. A standard CPC circular connector is used as the electrical interface with the TEC module. The controller is sold with the mating connector and contacts to allow the TEC module to be wired to the connector for easy connectivity.

• Model NumberINB 1400-48-AA

WAtronix, Inc thermoelectric air conditioner (AC) assemblies provide Thermoelectric cooling solutions for electronic telecommunication enclosures, computer cabinets, mini-fridges, and in other enclosed spaces that require specialized climate control. Solid state construction . Efficient low cost cooling (Heating optional) . Environmentally sealed-no flow of airborne contaminants into equipment . No Freon or harmful emissions-environmentally friendly . Maintenance free-no moving parts, or filters to change . Indoor (NEMA 12) or Outdoor (NEMA 4X) applications . Quitet, compressor free! . Low vibration . Easy installation-horizontal or vertical . Reliable, long lasting solution (MTBF 200, 000 hours)

• ColorRED,BLACK,VIOLET

The BTC Thermoelectric Controller is designed to provide temperature control for a variety of common Thermoelectric applications. The controller provides single action control which can be used for either heating control or for cooling control. A resistive probe sensor is provided to be used as temperature feedback. The controller can be used as a desktop controller or can be wall or panel mounted. The BTC controller accepts either a 12 VDC or a 24 VDC input. A relay contact inside the unit provides switching control output to the external TEC module. The relay can switch up to 5 amps of DC current. The BTC controller is ideal for basic temperature control of most TEC applications including cold plates, space coolers, and refrigeration units.

• Weight240g
• Dimensions62 x 43 mm
• Water Flow6100 +/- 10% ml/min
• Water Height2800 mm
• ModelInb6000-WP

The Chiller pump inb6000-WP is designed for liquid chiller application and different CPU Cooling application. Most orders ship within 24 hours, with special orders usually shipping in two to four weeks.