Post Buy Requirement
IA
United States
Add Review

Other Products / Services #5216393

Boxair Mobile Filter Unit

Mobile units provide flexibility to capture dust or fumes from any location.

Washable metal pre-filters save money and are easy to clean.

99.9% filter efficiency to make sure your facility complies with the strictest of regulations.

Request a quote or view product specifications below.
View Complete Details

Gardner Denver Industrial XP Series

The outboard position of rotor bearings allows atmospheric venting between the compression chamber and the bearings and gears. This prevents gear and bearing lubricants from contaminating the compression chamber and the air or gas.
View Complete Details

70 Duroflow

  • Pressure 15 psig (1.03 bar).
  • Air Flow range 412 – 4, 290 cfm
  • Vacuum 16.0″ Hg (542 mbar).
  • Series 70
Manufactured Under ISO 9001 Quality Standards. Rotors made from Single Ductile Iron Casting. Air Flow range: 412 4, 290 cfm (700 7, 290 mh). Pressure to 15 psig (1.03 bar). Vacuum to 16.0 Hg (542 mbar).
View Complete Details

Dresser Nut Ports

High performance diaphragm valve with dresser nut ports. Available with integral pilot or as remotely piloted valve. Outlet at 90 degree to inlet.
View Complete Details

Tribo Guard Model

  • Series 4001
  • remote sensor NEMA 4/7/9
The LED indicators, customer alarm level and time delay controls make the Tribo Guard Model 4001 a simple yet reliable broken bag detector. Available in both remote sensor (NEMA 479) or Integral Sensor (NEMA 4) enclosures. Optional window front enclosure is also available. CE approved.
View Complete Details

Tribo-D2-Model-3400

  • Model Number 3400
It is easy to install, simple to use, and requres no field set-up. When combined with the Tribo Trac Leak Locator or Tribo Prevent Dual Alarm System it will function as a monitoring system to provide useful information for collector maintenance management. In addition to emissions applications, the Tribo D2 is suitable for process flow applications.
View Complete Details

Highly Corrosive Fans

Fiberglass Reinforced Plastic (FRP) Fans. FRP fans resist severe corrosives and are impervious to outside environments. Centrifugal blade types and vaneaxial will suit any airstream or installation.
View Complete Details

Diverter Dampers

  • Size ranges 10″ to 48″.
  • metal seat 90%
  • designs 1-PSI & 4000
Size ranges from 10 to 48.
Process temperature ranges to 2200 F.
Round, square or rectangular configurations.
Stainless steel or painted carbon steel construction.
Shutoff options of 99% (tadpole seals), 97% (metal seat), 90% (swing-thru; control & balancing).
Ball bearings and shaft packing glands standard.
Actuation options of manual, electric, pneumatic open closed actuators available. OpenClosed or modulating control.
Standard designs to 1-PSI & 4000 FPM process air with higher available.
View Complete Details

Leak Detection Powder

  • Size gallon, 5 lb. can
  • colors Green, Pink, Yellow, Orange, Red, Violet
Used for quickly finding leaks and holes in baghouse style dust collectors.

Utilizing our specialized blacklight, the bright fluorescent powder will identify holes and tears in filter bags as well as broken welds, or improperly seated bags.
View Complete Details

Sonic Horns

IAC has been supplying over 30 different models of Sonic Horns to a variety of industries for over 25 years. Specific industries require different frequencies, sizes and materials of construction of horn, which IAC can recommend for you! Sonic Horns can be used in the following industries: Cement, Grain, Wood, Food, Foundry, Steel, PVC Compound, Kaolin Clay, Carbon Black, Power Generation, Spray Dryer Operators and Boiler Operators.

Use IAC Sonic Horns to clean:

Baghouses cleans filter bags and hoppers
Food and Dairy Spray Dryers removes sidewall build-up from dryers, baghouses and cyclones
Electrostatic Precipitators reduces build-up on collector plates, electrode wires, hoppers, inlet distribution devices
Cyclones eliminates sidewall build-up and discharge plugging
Bins & Silos reduces funneling of powdered material and eliminates discharge plugging
Heat Exchangers and Economizers reduces and eliminates tube build-up
Ducts and Conveying Lines eliminates wall build-up and plugging
View Complete Details

LB Non-Pressure Fill Cover

  • Size 10in.
  • part no 211
Non-pressure fill cover for cargo tanksconveying systemsindustrialstorage silo Part No. Prefix: 211
View Complete Details

AC Input Timer Board

  • Models DNC-T2003
  • Output 10 A-400/600V
Digital Timing Circuitry: allows for stable timing from -40C to 65C temperature range
Pulse Time: line synchronized to eliminate 8 millisecond triac turn off variation
10 A-400600V Output Triacs: for maximum protection against output shorts.
200 VA load rating
Conformally coated for protection against vibration, humidity, and contamination
2 Modes of Operation: can be operated Continuously or On Demand via external pressure switch
Field Selectable: for numbers of outputs required
LED Indicators: for compartment being cleaned indication
Rugged Timing Adjustments: large stable potentiometers are used for ON and OFF time adjustments
Metal Chassis Provided: for mounting directly into NEMA 4 box
Timer Functionally Tested for 24 Hours: to eliminate field failures
Input Protection: 30 joule metal oxide varistor
One Year Warranty: warranted to be free from defects in materials or workmanship for one year from date of manufacture
View Complete Details

Intelligent AC Input Timer Board

  • Models T2310
This offers a small, low cost replacement to the separate solid state sequencer and pressure gauge combination most often used in on-demand pulse jet cleaning systems. These controllers will sense the pressure difference across the filters of a bag house and initiate a cleaning cycle when the filters start to impede the air flow. When the pressure drops to normal the controller will stop cycling.
View Complete Details

Intelligent Remote Output Input Timer Board

  • Model Number DNC-T2300-I/O
It also incorporates three 4-20 mA current loop inputs, three contact closure type inputs, and one type J thermocouple input. In addition, the IO board provides 16K bytes of non-volatile memory for the storage of up to one year of input trending data. The IO board requires either a T2310 or T2320 Timer to program and operate the board and a T2300 Display Panel to access data trending reports.

The IO board offers significant versatility to the Intelligent Dust Collector Controller system. It can monitor, display, alert, and store dust collector system parameters from pressure sensors, emission monitors, plenum air flow sensors, broken bag detectors, fan motor current sensors and any other device which has a 4-20 mA current output or contact closure output. The unit works in conjunction with the T2310 and T2320 Timers and also with the DNC-T2300-DSP Display Panel.
View Complete Details

DC Input Timer Board

In Continuous Mode, the pressure switch terminals are shorted. Upon application of output voltage, the control activates output #1 after the preset off time. It will continue to activate outputs sequentially until input voltage is removed.

In On Demand Mode, the pressure switch terminals are connected to an isolated set of contacts of a differential pressure switch. The control will activate the outputs sequentially whenever the pressure switch contacts are closed. When the pressure switch contacts open, the output sequencing stops. Re-closing of the contacts will cause the control to resume activating the outputs. Program wire allows the user to select the maximum number of outputs to be activated.
View Complete Details

Aluminum View Port

  • models 8″ and 20″
  • metirial Aluminum
Aluminum View Port with access door for storage bins and hoppers. 8 and 20 models available
Cast aluminum construction
Hinged and gasketed access door
Replaceable plexiglass window
Easy open door latch
White neoprene mounting gasket
View Complete Details

Roots URAI-J-DSL Blower Motor

  • Series URAI-J-DSL
The basic model features a cast iron casing with a computer designed cast relief for noise and shock suppression, carburized and ground alloy steel spur timing gears secured to steel shafts with a taper mounting and locknut, and cast iron involute impellers.
View Complete Details

Diaphragm Valves

We carry a wide range of styles and brands of Diaphragm Valves.

Being an OEM distributor means we have access to a variety of OEM replacement parts suited for your application.

Have one of our engineers contact you with pricing and shipping time by filling out the request form below.
View Complete Details

Solenoid Valves

Small poppet valves for tight shut off, mountable in any position, brass and stainless steel construction.

Reliable, proven design with high flows
Small Poppet valves for tight shutoff
Wide range of elastomers for specialty service
Mountable in any position
Brass and stainless steel constructions
Our warehouse stocks the most reputable names in Solenoid Valves:

Asco
Goyen
Taeha
View Complete Details

DustAlarm Broken Bag Detector

The DustAlarm Broken Bag Detector provides reliable and economical detection of leaks and filter failures in many powder and bulk solids industries. The DustAlarm is successfully utilized in a wide variety of applications where detection of dust levels is critical either to safety, maintenance, equipment operation, plant efficiency andor the environment. The DustAlarm measures the triboelectric effect to determine when particle emissions exceed acceptable levels.
View Complete Details

Flo-Guard Broken Bag Detector

The Flo-Guard uses a floating alarm point reference and a digital triboelectric microcontroller to eliminate instability common in other flow switches.
View Complete Details

Tribo Digital Signal Processor

  • Series DGD
It features an all-digital, wide dynamic range, digital signal processor(DSP) operating system, eliminating the need to manually set monitoring ranges. It provides bag leakbroken bag detection and location while simultaneously monitoring selected parameters; (ie velocity, differential pressure motor amps). Tribo DGD functions as a stand-alone unit, or can be connected to a PC providing advanced capabilities to smaller dust collector operations (until recently only available with Tribo Link
View Complete Details

Tribo Dual Alarm System

  • Colour bright 0-100%
  • signal 4-20mA
Tribo Prevent Dual Alarm System provides remote early warning and high level warning alarms by comparing setpoints with 4-20E mA analog output of emissions levels from any triboelectric monitor.
View Complete Details

Clean Air Fans

Airfoil Bladed Centrifugal Fans. These industrial fans with efficient airfoil blades are recommended for all supply air and clean air exhaust applications, as well as variable volume systems.
View Complete Details

Butterfly Dampers

  • Sizes 6″ to 144″.
  • metal seat 97%
  • designs 1-PSI & 4000
Sizes ranges from 6 to 144.
Process temperature ranges to 2200 F.
Round, square or rectangular configurations.
Stainless steel or painted carbon steel construction.
Shutoff options of 99% (tadpole seals), 97% (metal seat) & 90% (swingthru; control & balancing). Ball bearings and shaft packing glands standard.
Actuation options of manual, electric, pneumatic with spring return and failsafe available. OpenClosed or modulating control.
Standard designs to 1-PSI & 4000 FPM process air with higher available
View Complete Details

Guillotine Dampers

  • Size ranges 10″ to 84″.
  • metal seat 99%
  • designs 1-PSI & 4000 FPM
Size ranges from 10 to 84.
Process temperature ranges to 1000 F.
Round, square or rectangular configurations.
Stainless steel or painted carbon steel construction.
Shutoff options of 98% (metal seat) & 99% (compression seals).
Enclosed bonnet (blade retraction) area standard.
Actuation options of manual, electric, pneumatic openclosed actuators available.
Standard designs to 1-PSI & 4000 FPM process air with higher available.
View Complete Details

Louver Dampers

  • Size 14″ to 132″
  • Model LSI & LRI
  • ranges 1100° F.
  • metal bar seats 90%
  • designs 1-PSI & 4000 FPM
Size ranges from 14 to 132.
Available in parallel or opposed vane action.
Process temperature ranges to 1100 F.
Round, square or rectangular configurations.
Stainless steel or painted carbon steel construction.
Shutoff options of 99% (compression seals), 98% (jamb seals), 95% (metal bar seats) & 90% (swing-thru; control & balancing).
Ball bearings and shaft packing glands standard.
Actuation options of manual, electric, pneumatic with spring return and failsafe available.
Standard designs to 1-PSI & 4000 FPM process air with higher available
View Complete Details

Blue LED Light Kit

  • metirial aluminum
  • Power 150 W
This powerful and compact IAC Blue LED light was designed to help maintenance personnel quickly find leaks in any dust collection unit. Cordless and rechargeable, this Kit makes filter bag inspection quick and easy. The IAC Blue LED light brightly flouresces IACs ultra violet leak detection powder where bag leaks and tubesheet cracks are present. Use with Detekto Lite Leak Detection Powder.
Cordless and rechargeable, no need for extension cords.
Durable anodized aluminum body
The 2200mAh battery provides up to 3 hours of use
The Blue LED offers a bulb-life of up to 100 000 hours
Power equivalent to larger 150 W models
View Complete Details

Ultra Violet Detection Light

  • Large 16 inch
  • high 25 ft.
  • Powerful 15 watt, 110 volt
Brightly illuminates the Detekto-Lite powder
Large, 16 inch long ultra violet bulb
Rugged impact resistant design
Bulb is fully enclosed
Protective end covers
25 ft. high visibility cord with polarized plug
Powerful 15 watt, 110 volt ultra violet bulb
Same day shipment!
View Complete Details

Quick-Quote Configurator

  • Size 20, 000 ACFM
  • metirial stainless steel
  • vacuum 20″ W.C.
Utilizing IACs new Dust Collector Configurator Program you can purchase a complete Baghouse Dust Collector directly through our aftermarket parts department. This program will save you time and money. From start to finish it is possible for us to quote, provide approval drawings and ship equipment within 4 weeks.
View Complete Details

Industrial Fume Arms

These long lasting fume arms are easy to assemble and are known for their durability over time.

Request a quote or view product specifications below.
View Complete Details

Welding Table

  • Series SF1000
Filters 99.9% of fumes caused by welding, cutting and grinding.

Integrated filtration system with easy to access cartridge filters.

Revolving table offers an efficient work environment.

Request a quote or view product specifications below.
View Complete Details

Extraction Fans

Industrial strength fans to extract the strongest of fumes.

Easily to equip and maintain. Intelligently designed to take up minimal amount of space.

Request a quote or view product specifications below
View Complete Details

Pre-Coat Powder

A fabric filter bag is not intended to be a filter, but rather a porous surface on which to develop a dust cake. The developed dust cake becomes the actual filter. When a baghouse has had a new fabric filter bag changeout and is placed back into service, airflow through the baghouse is at its greatest volume and velocity.

The initial onrush of dust and airflow through the baghouse and new filter bags are at such volumes and velocity that the dust particulate can penetrate the fabric filter surfaces instead of forming a dust cake on the surfaces, and, thereby, partially blind the new fabric filters. This partial blinding resists airflow, slowing down the velocity and allowing the dust to begin developing a dust cake on the fabric surfaces. But, by the time the fabric is starting to develop the proper dust cake, partial blinding of the fabric surfaces has decreased the potential airflow through the baghouse and, in most cases, remains in this condition until a changeout of new fabric filters occurs.

Another problem that affec
View Complete Details

EXTENSION BOOMS

Get the reach you need for your fume arms.

Heavy duty, steel enclosed support beams to ensure a locked in fit.

Request a quote or view product specifications below.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Industrial Accessories Co.)
  • Mission, KS 66202 map, United States
  • Share us via