Other Products / Services #1889951

The Magnatech Pipeliner II is designed to make pipe-to-pipe and pipe-to-fitting welds. Interchangeable guide rings mount the head on the pipe, allowing a broad workpiece size range from 168 1524 mm (6 60) and larger.

Copier introduces a line of CB machines that conducts three operations in one: measures, cut and bevel pipe. Three models (8CB, 16CB, 24CB) with overlapping ranges covers pipe from 33 615 mm (1 - 24) O.D. Copiers CB series is CNC controlled with the advantage of both radial and axial fe.

The Magnetech T 419 Weld Head designed to make pipe-to-pipe and pipe-to-fitting welds. It is full function with the capability of reproducing all the motions of a skilled manual welder. The T Head is used for larger diameterheavy wall applications, requiring the precise weld process control of gas tungsten arc welding.

Protem provides a line of tools for pipe and tube beveling. Eights lines (US25, US30CH, US40, US25 CA, US40 CA, US80, US150, US450) with overlapping ranges covers pipe and tube from 12.5 1, 422 mm (0.5 - 56) O.D. Protem US series pipe beveling machines are powerful, sturdy, versatile and reliable.

Axxair introduces a line of easy-to-operate pipe and tube cutting and beveling bodies. 4 models (121, 171, 221, 321) with overalapping ranges cover pipetube from 0.5" to 12.75" OD.

Stainless steel jaws 0.5" to 12.75"
V bevel with profile guide roller
J bevel with profile guide roller
Outer profile guide system: to account for tube "out of round"
Rotation handle as standard: optimizes consumable life and beveling quality

Axxair introduces a line of easy-to-operate pipe and tube, cutting and beveling bodies. 10 models (CC81, 121, 121ECO, 171, 221, 321, 421, 521, 721, 1100) with overlapping ranges cover pipestubes from .25 to 40 OD. Axxairs CC series works on Axxair cutting and beveling motors.

The TIGSpeed is an easy to use two-sided simultanieous AC TIG Welding machine. It boasts a reliable ignition and alternating current types.TIG cold and hot wire welding with dynamic wire feeding system
High process reliability and reproducible welding results
Higher welding speed and extremely simple handling, similar to pulsed MIGMAG welding
Dynamic wire feeding for a controllable weld pool even with positional welding:
The wire feeding is superimposed in parallel using a forward and backward movement
Heat supply to the wire for improved deposition rate and an even lower risk of weld errors
Up to 100% faster welding speed
Up to 60% improvement in deposition rate
Dilution reduced by up to 60%
Perfect weld appearance, no weld spatters spotArc and spotMatic
4-roller wire feed equipped for 1.0 mm + 1.2 mm steel wires
Can be used with any TIG welding machine
Fewer emissions: Significantly lower fume generation than with MIGMAG pulse welding

Copier introduces a line of easy-to-operate machines for pipe beveling heavy wall pipe up to 1. Five models (3S, 8S, 16S, 25S AUT, 30S AUT) with overlapping ranges covers pipe and tube from 12 770 mm (0.5 - 30) O.D. Copiers S series machines makes pipe bevels, on pipe wall up to 1, in one pass precision and repeatability.

Axxair beveling motors use the proven carbide process and can bevel up to .315". Two models (GA10 and GA15) of bevel heads produce ready to weld ends on wall thicknesses up to .5 in a matter of seconds.

Aggressives PT series uses a three blade locating system to provide optimal support strength and alignment. Two models (PT1250 and PT2000) with overlapping ranges covers pipe and tube ranging from 1.25ID 12.75OD.

COPIER has introduced the new Buffalo Pipe Bending Machine.
This heavy-duty machine is capable of bending industrial-strength pipe with great precision. This enables your fabrication shop to keep more projects in-house and to help you move through projects with greater efficiency.

COPIER Groove Master is a pipe roll grooving machine. This machine is used to press a groove into a metal pipe to put a coupling on it for sprinkler pipe systems. Two models (GM1 and GM 2) with overlapping ranges covers a range pipe from .75 34 O.D. The groove depth is easy to adjust using the control panel of the machine.

We offer a full range of EWM welding machines, wire feeders and welding torches. EWM has over 50 years of experience in welding technology.

We sell the best ID pipe welding and cladding machine on the market - manufactured by
AMET (Advanced Manufacturing Engineering Technologies).If you have a complex welding applcation or you need automation for a repetitive welding applcation, ISI can put a package together for making your application automated. Repetitive and difficult welding applications is where AMET systems outperforms the competition - AMET can provide a solution and ISI can help get you what you need.

Axxair introduces a line of easy-to-operate pipe cutting motors. 4 models (FS15, FS25, FS19, FS29). FS series motors are compatible CC 121, 171, 321, 421, 521, 721 cutting bodies (0.25 to 28 OD).