Our Products #4977097

Question: Do you have Dust Fume Smoke Pollutants that you collect with filtration (dust collectors)? Need your dust collector SERVICED?

Not only do we cut out the filter middlemen, we can provide replacement service for your dust collector filters too! Have your system serviced by system professionals.

When you buy from Indventech, there is a good chance our filter comes from the same manufacturing line as the OEM cartridge. Most of our filters are made directly to the specifications of the OEM. In a few rare cases, we are unable to manufacture due to a current patent. If our replacement doesn't performed as well or better than the OEM in service, we don't offer a replacement.

What about patents? Patents expire or can have rights bought, and they don't always affect a filter's performance. Before we begin selling ANY filter, our filters go through the same rigorous testing to ensure that our filter will perform the same or better than the OEM.

You get the same or better filter for less money.

We can replace most brands including:

AAF

Abrasive Blast Sys

Aercology

Air Refiner

Airex

Airflow Systems

Amerex

AQE

BHA

Binks

Braden

Camfil

Camfil Farr

Champion

Clark

Clean Air America

Clemco

Complete

Conair

Demarco Max Vac

Diemco

Dollinger

Donaldson Torit

DustHog

Dynamic Air

ECO

Empire

Endustra

Enviro Systems

Environmental

EXIJET

FARR

Filter One

Filtermart

Fleetlife

GEMA

Guyson

Hoffman

Ingersoll Rand

Iontech

JBI - Global

MAC

Micro-Air

Mikropul

MPF

Technically advanced industrial dust, mist, or fume collectors designed around your process requirements.

Standard dust and mist collectors that we sell and service include: Clarcor Industrial Air (UAS & BHA) industrial dust collectors, SmogHog, and DustHog lines, as well as Quality Air Managements (QAM) industrial baghouses and Quencher.

We also provide standard cyclone collectors and all the duct and accessories associated with your system.

Types of collectors:

Bag House
Booth
Cartridge
Cyclone
Downdraft Table
Dropout Box
Dust
Manual
Portable
Pulse Jet
Oil Mist
Reverse Air
Shaker
Suction Rail
Weld Fume
Weld Fume Extraction Arm
Welding Table
Wet
Custom just ask!

Submit a request for a competitive quote or call to discuss your process & dust collection needs, including design, layout, and selection assistance.

Filtered Fan - Exhaust or Supply with Direct Drive - Model 900 CAF

APPLICATION
Excellent for use where filtered intake or exhaust air is required. Efficiently supplies clean, filtered air for OEM machinery and equipment markets such as pressurizing electrical cabinets. Economical choice for small un-ducted paint spray booths.

FEATURES AND BENEFITS
Available with TEFC or explosion proof motors in single or three phase.
Rugged spark-resistant cast aluminum propellers are standard.
Standard OSHA style propeller guard.
Removable filter box section.
Disposable 2 filters are high capacity, pleated type that meet MERV 8 rating.

Tube Axial Duct Fan Blower - Direct Drive Model DF

HEAVY GAUGE ALL WELDED STEEL CONSTRUCTION. EASILY MOUNTED INTO DUCT.

APPLICATION These direct drive tube axial fan blowers are recommended for duct application in mills, mines, foundries, factories or wherever fumes, dust, smoke, or steam must be removed.

Propellers are non-sparking cast aluminum so that unit with explosion proof motor can be used to handle explosive gases.

Drum made from heavy gauge steel. Welded construction. Angle iron flanges on each end of drum with eight mounting holes for ease in mounting into duct.

Motors only high quality industrial motors are used. Fans with motors are completely assembled and fan tested at factory before shipping. Motors are available in open drip proof, TEFC (Totally Enclosed, Fan Cooled), and EXP (Explosion Proof).

Air gun performance WITHOUT the danger of compressed air! Keep your workers SAFE and PREVENT troubles with OSHA!

The Jet-Kleen and Jet-Kleen Limited Blow-Off Systems from Specialized Safety Products provide safe, economical, and highly effective removal of residues such as dust, fiber, water and more from people, surfaces, or work environments.

Both the Jet-Kleen and Jet-Kleen Limited offer a safe, efficient alternative to compressed air, consuming less energy and emitting less noise. Their blower-driven system delivers a high volume of air at a relatively low pressure well below OSHA standards.

The lower pressure means Jet-Kleen units can be safely aimed at virtually any part of the body (excluding the eyes and ears); even direct contact with unprotected skin poses no hazard.

Both the original Jet-Kleen and the NEW Jet-Kleen Limited are available in either portable or wall-mounted models.

Purchase online or call today to discuss the model that will best suit the needs of your facility.

Models available:

115V JK-FFP1 JK-FFP1V JK-WTB1F JK-WTB1FV
240V JK-FFP2 JK-FFP2V JK-WTB2F JK-WTB2FV

APPLICATION - This industrial blower fan can be placed on the floor for portable, high velocity cooling for personnel or products. Heavy duty construction provides many years of service in demanding industrial locations such as steel mills, foundries, factories and warehouses.

FEATURES AND BENEFITS
Front & rear OSHA style concentric circle wire guards on all sizes except 60 which is wire mesh.
Rugged spark-resistant cast aluminum propellers are standard.
Industrial grade TEFC (Totally Enclosed, Fan Cooled) motors are standard.
Explosion proof motors available for hazardous locations.
Available in low, medium or high pedestal stands to meet varied centerline height requirements.
Medium and high stand fans rotate 180 degrees on their center mount axis.
All models have cord wired to motor and extended through fan housing except explosion proof fans.

Roof Exhaust or Supply - Hooded Model 1900 B

Model 1900 belt drive, axial roof ventilators are specially designed for use as an inexpensive hood exhaust fan or fresh air supply unit for industrial or commercial systems where low to medium static pressures are encountered.

Up to 38" static pressure or up to 47, 000 CFM.

OUTSTANDING FEATURES:

Standard construction. May be used for exhaust or supply. Special units can be manufactured for exhaust and supply.
Heavy industrial construction steel base with aluminum hood. 1900 Series roof exhausters incorporate standard fans. Steel base is coated with cold galvanizing compound as standard.
Quiet operation.
Birdscreen included.
Self aligning pillow block bearings with locking collars.
Industrial quality motors 1900 roof exhauster units are completely assembled and tested at factory before shipping.
Motor types include TEFC (Totally Enclosed, Fan Cooled) and EXP (Explosion Proof).
Steel propellers standard. Cast aluminum propellers available.

36" Fan Blade Diameter - Reduced Noise, Industrial Direct Drive Wall Exhaust Fan

We use the latest technology in air movement design to produce maximum flow, minimize noise while keeping the maintenance department in mind. NO belts to change! Need modifications? Customization is where we shine. We offer a wide variety of sizes, performance, motors, material of construction, and coating to meet your needs. We also offer low noise, direct drive tube axial fans.

TEFC (Totally Enclosed, Fan Cooled) 230460V, 3Ph, 60Hz, 1150 RPM motor
Up to 20, 540 CFM
Standard paint is a zinc rich rust resistant for longer life
Heavy duty PAG (Glass fiber reinforced polyamide) blades
Target sound level less than 70 dBA at 10'
Additional sizes, arrangements, motor classifications, materials of construction, finish coatings, drive configuration, performance criteria, customization, and application assistance available upon request.

OPTIONAL: Wall mount package including fan and shutter mounting box, full rear box guard, and mounted discharge shutter.

DID YOU KNOW? We can customize products based on custom flow and pressure conditions to suit your application. Don't see what you're looking for? Chat with us or call for other options.

Models available:
36 iL936-2 iL936-3

18" up to 60" Roof Exhaust Fan - Model EBRVCS

APPLICATION

Designed for use in high moisture or contaminated airstreams requiring the motor and drive components to be located outside the airstream. Can be adapted to facilitate ductwork connection to fan inlet. Please contact Indventech for details.

FEATURES AND BENEFITS

Utilizes Model EBCS tube axial duct fan with powder coated Aluminum hub and PAG propeller standard.
Heavy gauge curb cap continuously welded to prevent water penetration.
Weatherproof non-fused disconnect switch standard (capped pipe port in curb cap standard for wire access inside curb as needed)
Butterfly damper section, mill galvanized construction, with damper blades that open when fan is energized and close watertight when unit is off. Dampers rotate in nylon bearings on a stainless steel axle.
Butterfly damper section removable as a complete unit for access to propeller.
Combination weather coverbelt guard.
Motor and drive components located outside the airstream.
Suitable for maximum temperature up to 225F.
Available in 304 or 316 stainless steel construction.
Up to 1 12" static pressure or up to 65, 730 CFM.

Industrial Roof Exhaust - Belt Drive Model BRV8

The BRV8 Roof Exhaust Fan meets the ventilation need for a simple, efficient weatherproof closure for vertical air discharge. Lid opens when fan is on, closed weather-tight when fan is off. Discharge air stream prevents entry of rain or snow. Lid pivot rods turn in nylon bearings; never require lubrication. Panel provides easy method of curb mounting.

Up to 1 12" static pressure or up to 41, 232 CFM.

OUTSTANDING FEATURES:

Ruggedly constructed steel base including rolled venture section standard.
Steel propellers are standard. Cast aluminum propellers available on most models at different fan speeds.
Self aligning pillow block bearings with locking collars.
V belt drive for quiet operation.
Motor types include TEFC (Totally Enclosed, Fan Cooled) and EXP (Explosion Proof).