Post Your Requirement Menu

Welcome User

Other Products / Services

Our Complete range of products are WILDEN ALUMINUM DIAPHRAGM PUMP, JACKETED TILT KETTLE, Diaphragm Pump, displacement pump and DIAPHRAGM VALVE SAUNDERS.

WILDEN ALUMINUM DIAPHRAGM PUMP

2″ WILDEN ALUMINUM DIAPHRAGM PUMP Stock no. P-3002 2″ WILDEN ALUMINUM DIAPHRAGM PUMP Model M8 2″ inlet and outlet Air powered Several similar available

View Complete Details

JACKETED TILT KETTLE

  • Dimensions: 55″ x 34″ x 43″
  • inside diameter 25″

50 gallon STAINLESS STEEL JACKETED TILT KETTLE 29.5″ inside diameter x 25″ deep with “V” lip Manual crank tilt Has been repaired. We will inspect and pressure test to insure no leaks (4) legs, 40″ x 26.5″ outside footprint 55″ x 34″ x 43″ tall oa in the upright position

View Complete Details

Diaphragm Pump

  • Stock Number: : P-2758

1″ SANDPIPER STAINLESS STEEL DIAPHRAGM PUMP Stock Number: P-2758 1″ SANDPIPER STAINLESS STEEL DIAPHRAGM PUMP Warren Rupp Sandpiper model SB1 SS 4 SS 1″ tri-clamp in and out. Air powered. Last used for paper coatings

View Complete Details

displacement pump

  • Stock no P-2928

4″ WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 220 Stock no. P-2928 4″ WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 220 Has 4″ tri-clamp fittings. Just rebuilt Will sell pump only or setup with a 10 Hp motor and gear reducer

View Complete Details

DIAPHRAGM VALVE SAUNDERS

  • Stock no G-3752

3″ TRI CLAMP STAINLESS STEEL DIAPHRAGM VALVE SAUNDERS Stock no. G-3752 3″ TRI CLAMP STAINLESS STEEL DIAPHRAGM VALVE Sanitary stainless steel construction Saunders SV4 24 69.6 HT # 188458 3 similar available, one with an extra bottom fitting

View Complete Details

TANK CONE BOTTOM CLOSED TOP

  • Diameter 63″

1000 gallon STAINLESS STEEL TANK CONE BOTTOM CLOSED TOP Manufacturer Hicks, rated for atmospheric pressure 63″ diameter a 79″ straight side, cone bottom & top Stainless steel with 4 legged steel stand. Has top manway & 2″ top center inlet 2″ bottom center outlet to elbow with ball valve and quick connect Last used for Alcoholic Beverages

View Complete Details

ELECTRIC KETTLE JACKETED TANK SWEEP AGITATOR

  • Dimensions: 16″ x 16″ x 44″
  • total volume 6 gallon

6 gallon ELECTRIC KETTLE JACKETED TANK SWEEP AGITATOR 12.5″ id x 11″ with dish bottom, 2 pc. lid Polished stainless steel. Has a label “SSS” 40 W half sweep agitator, 90 W for center shaft to bottom metering out, 200-240 V gear reduced induction motors on both Electrically heated watersteam jacket wside sight glass 34″ offset bottom outlet, bottom center to small hose out Oa 16″ x 16″ x 44″, 6 gallon total volume. No controls came with! Will try to come up with controls

View Complete Details

KETTLE JACKETED

  • Stock no E-4318
  • wide 55″ x 75″

300 gallon STAINLESS STEEL KETTLE JACKETED Stainless steel with a carbon steel jacket No id plate on kettle, pressure rating unknown 54″ inside diameter x 42″ deep 2″ bottom center outlet with ball valve and adapter to tri-clamp connection Has fork slots 8″ off the ground and is on wheels Oa 61″ wide x 55″ x 75″ to top of rim Last used for health care products. Will pressure test jacket as we do with all of our jacketed tanks and kettles

View Complete Details

Stainless Steel Reactor

  • Gallon 185

185 gallon 700 liter 316L STAINLESS STEEL REACTOR Manufacturer PRECISION STAINLESS Serial no. 201355-2, drawing no. 53462D rev B 40″ outside diameter x 41″ with dished top & bottom Stainless steel 316L shell, 304L jacket National Board no. 9135 Ratings, sh= 50 psi @ 350 psi, 15 psi (full) vacuum, jacket = 100 psi @ 350 F, 15 psi (full) vacuum 5″ mix flange, 14″ top manway, 1″ thermal well, jacket fittings 1.5″, (2).5″, Tri-clamp fittings = 2″, (2) 3″, (5) 1.5″ top inlets, 1.5″ bottom out & 6″ bottom out UNUSED! has some documentation. 700 liter capacity

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Rehoboth, MA 02769 map, United States