Other Products / Services

Molded from proprietary FDA- and RoHS-compliant polymer, Optimum cartridges provide exceptional clarity, chemical compatibility, impact strength, and dimensional stability.


The Zero Draft design improves fluid flow characteristics and reduces turbulence by ensuring the internal diameter is consistent from top to bottom with no taper restricting piston travel or affecting process results.

Unique external ribs at the outlet end prevent splitting when installing fittings or nozzles. Precision molded threads and a tapered counterbore at the 0.25 NPT outlet create a secure, leakproof seal.

A molded hex around the outlet fits into a matching orifice on the cartridge retainer for tool-free fitting and nozzle installation.

Optimum cartridges are available in clear, UV-blocking amber, light-blocking black, green, and white configurations. Capacities include 2.5 oz (74ml), 6 oz (177ml), 12 oz (355ml), 20 oz (591ml), and 32 oz (946ml).

Optimum cartridges are compatible with most retainers on the market today.

The Nordson 5 Gallon Rhino SD Bulk Unloader provides superior flow properties and ease-of-operation in dispensing high-viscosity adhesives and sealant materials.

The Rhino bulk unloader was designed for demanding manufacturing environments with durable components with a high-tech wear resistant coating to provide maximum operating time.

The modular design brings flexibility to accommodate changes in application requirements. Air motors, pumps, and follower plates are interchangeable for easy system configuration.

Bulk unloader designed to dispense high-viscosity, ambient temperature adhesives and sealants for a variety of applications.
Designed for long life and easy maintenance with large internal passageways, few internal parts and quick change packing cartridges.
Options include casters, pail hold downs, PTFE seals, light towers and filter packages.

The Rhino VE bulk unloader is designed for dispensing high viscosity, ambient temperature adhesives and sealants. Designed with many features that improve performance and material flow in high-wear applications, the Rhino VE unloader provides you with consistent material output, reduced maintenance and superior wear resistance.


Large internal passages reduce flow resistance and material shearing
Oil-less motor eliminates material contamination, reducing maintenance and assisting manufacturers in meeting environmental demands
Quick-change flange-mounted design on the packing gland allows for quick and easy pump packing changes
Fast air-motor changes ensure consistent material pressure to reduce pump winks
Available in 5- and 55-gallon capacities
Automatic changeover feature minimizes downtime by allowing continuous production during a container change

The Nordson induction side-seam pre-cure system can increase curing capacity and line speeds by as much as 20 percent, without increasing the capacity of an existing oven. The compact unit preheats the weld seams just before the cans enter the oven.

Accommodates faster weld lines without increasing floor space requirements
Sets powder side-seam coatings prior to entering existing oven for ease of product handling
Preheats side seams for 360 internal spray for improved coverage in the seam area
Provides longer dwell time at cure temperature with existing oven to improve cure
Instant startstop control saves energy and prevents overheating during line stoppages
Front panel LED diagnostics provide quick, simple troubleshooting and maintenance
Easily mounts over existing conveyor with minimal line modification for easy installation

The Xaloy SmartHeat Coating for melt pipes is a new heater coating allowing for tight process control for improved product quality.
Enhanced product quality through tight process control
Increased productivity due to reduced heater band maintenance
Reduced cleaning time with easy to clean surface
Maximized operator safety with elimination of exposed wires
Improved ROI through minimized energy consumption

Xaloy bimetallic extrusion barrels, manufactured by the pioneer in bimetallic barrel technology, are produced to the highest quality standards. Nordson offers the most innovative wear resistant packages for optimized processes, performance and quality.

Extended work life through selection of the optimum alloys for the specific abrasive and wear resistance requirements
Increased throughput and product quality through precision fit between screw and barrel for a longer period of time
Improved productivity
No degradation or contamination of the process due to no seams trapping polymers (for barrels up to 6100 mm [240])

The patented Nordson bulk powder coating material feed system supplies virgin powder directly from a fiber drum to a Nordson hopperfeeder in a continuous, more efficient operation.

Features a drum carrier unit, customer drum lid and up to three powder transfer pumps
Pumps can deliver up to 200 lbs (91 kg) of powder per hour

The Nordson EcoDry Compound Dryer is economical, compact, and specifically designed for smaller production lines with a wide range of can ends. The dryer uses Nordson's patented induction-heating technology to cure water-based end compounds. This technology allows compounds to dry from the metal out making the drying process faster and more complete.

At 45 inches long, the dryer requires only a fraction of the floor space of conventional dryers
Cures up to 475 can ends per minute per line.
Open-door interlock switches
Over- and under-temperature alarms and shut-downs
Integral exhaust blower purges moist air from induction tube
Easy installation, all electronics housed in common enclosure
Low wattage

The FX-940 automated optical inspection system offers high-speed PCB assemblies inspection with exceptional defect coverage, inspecting solder joints and verifying correct part assembly, enabling users to improve quality and increase throughput.Nordson YESTECH's advanced 9 megapixel color camera imaging technology offers high-speed PCB inspection with exceptional defect coverage. With one top down viewing
camera and four side viewing cameras, the FX-940 automated optical inspection system inspects solder joints and verifies correct part assembly enabling users to improve quality and increase throughput.

Programming the FX-940 AOI system is fast and intuitive. Operators typically take less than 30 minutes to create a complete inspection program including solder inspection. The FX-940 utilizes a standard package library to simplify training and ensure program portability across manufacturing lines.

Advanced Fusion Lighting and newly available 9 megapixel image processing technology integrates several techniques, including color inspection, normalized correlation and rule-based algorithms, to provide complete inspection coverage with an extremely low false failure rate.Configurable for all line positions, the FX-940 automated optical inspection system is equally effective for paste, pre post-reflow and final assembly inspection. Off-line programming maximizes machine utilization and real-time SPC monitoring provides a valuable yield enhancement solution.

The M1m offers high-speed microelectronic device inspection with exceptional defect coverage. With resolutions down to submircon levels and telecentric optics, the M1m provides complete inspection, all within a footprint less than 1 sq. meter.Nordson YESTECH's advanced megapixel technology offers high-speed PCB inspection with exceptional defect coverage. With high resolution and telecentric optics, M1 Series inspects solder joints and verifies correct part assembly, all within a footprint less than 1 meter wide, enabling users to improve quality and increase throughput.Programming the M1 Series is fast and intuitive. Operators typically take less than 30 minutes to create a complete inspection program including solder inspection. The M1 Series utilizes a standard package library to simplify training and insure program portability across manufacturing lines.Newly available image processing technology integrates several techniques, including color, normalized correlation and rule-based algorithms, to provide complete inspection coverage with an extremely low false failure rate.

Configurable for all line positions, the M1 Series is equally effective for paste, pre post-reflow or final assembly inspection. Off-line programming maximizes machine utilization and real-time SPC monitoring provides a valuable yield enhancement solution.