Our Products #5143653

Standard Grade D Filtration PanelReviews There are no reviews yet.Be the first to review Standard Grade D Filtration PanelYour email address will not be published.

Product Description$3250.00 per month Includes Greener Blaster, 50 1 14 Blast Hose, #8 Long Blast Nozzle and deadman controlsCredit Card is required and a signed rental contract, Also front and back copy of credit card, Drivers License, and address of Jobsite

The Breather Box is a portable Grade-D filtration system designed to provide breathing air for a specific number of workers. The system filters incoming air from a compressor to provide respirator users with Grade-D quality air and monitors for CO andor Oxygen.The first stage element filters bulk water and particulate and has an auto drain. The second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain. The third stage filter removes organic vapors and odors and has a manual drain. Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% @ .01 micron. All Breather Boxes are designed to be used in the upright and closed position to prevent internal contamination.The standard carbon monoxide (CO) airline monitor operates on disposable 9-volt batteries, 8-16 volt DC, or 115 VAC for continuous air monitoring. An external audible alarm and light signals the workers of high CO content. A remote alarm jack is provided on all models except for Model BB15-CO. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet.

This portable Grade-D filtration systems is designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users Grade-D quality air. The first stage filters bulk water and particulate, second stage coalescing filter eliminates atomized oils, mists, and ultra-fine particulates, third stage removes organic vapors and odors. Filter change indicators are standard on all three stages. Filter efficiency is 99.99 percent.01 microns. A built-in carbon monoxide monitor operates on 9-volt DC, dual 8 16 volt DC or 115 VAC for continuous detection. An external alarm and light signals the worker of high CO content. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet. The Breather Box models is designed to be used in the closed position to prevent internal contamination. Solid aluminum block manifold. 0-160 psi Pressure Gauge. Flowmeter to verify air flow to monitor. Remote DC alarm jack with cover cap.

50cfm Filtration Breather Box. 50CFM Filtration Breather Box: Air Systems International & Breathing Filtration. These Portable Grade-d Filtration Systems Are Designed To Provide Breathing Air For A Specific Number Of Workers. The System Filters Inlet Air To Provide Respirator Users Grade-d Quality Air.The Breather Box is a portable Grade-D filtration system designed to provide breathing air for a specific number of workers. The system filters incoming air from a compressor to provide respirator users with Grade-D quality air and monitors for CO andor Oxygen.The first stage element filters bulk water and particulate and has an auto drain. The second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain. The third stage filter removes organic vapors and odors and has a manual drain. Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% @ .01 micron. All Breather Boxes are designed to be used in the upright and closed position to prevent internal contamination.The standard carbon monoxide (CO) airline monitor operates on disposable 9-volt batteries, 8-16 volt DC, or 115 VAC for continuous air monitoring. An external audible alarm and light signals the workers of high CO content. A remote alarm jack is provided on all models except for Model BB15-CO. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet.

Product DescriptionExplosion Proof Brick Light with 150 of cordMust purchase CoversMust have credit card to rentMust sign Rental contractCall for details

Clemcos Wetblast Injector System adds the dust-suppressing power of water to any pressure blast machine. The Wetblast injects a small amount of water into the high-velocity abrasiveair stream just before the nozzle.This hard-hitting mixture of water and abrasive cleans and keeps dust levels under control.The Wetblast System introduces water into the abrasiveair stream before it passes through the nozzle orifice. This results in a complete wetting of each abrasive particle, unlike with water ring systems. The Wetblast controls airborne dust far better than water ring systems.OperationThe power behind Clemcos Wetblast Injector rests in our exclusive 10:1 pump. It uses compressed air to inject water into the high-velocity abrasiveair stream at the nozzle. A single pump can easily operate two nozzles, each with independent controls. Simply purchase an additional nozzle adaptor and add one more hydraulic hose to the water outlet.The Wetblast Injector System requires no electric power, so there are no wires and no connections to short or shock.Because the Wetblast Injector has its own pump and uses relatively small amounts of water, any source of clean water will work household tap, water tower, or low-lying tank.A regulator and pressure gauge, mounted inside the control box, controls water pressure. The operator adjusts the water volume with a fine-thread needle valve at the nozzle.The versatile Wetblast Injector lets the operator blast with wet or dry abrasive. When the machine is equipped with an abrasive cut-off system, the operator can rinse the surface with air and water, then dry the surface with high-pressure air.ApplicationsA blast system with Clemcos Wetblast Injector quickly cleans structural steel to any degree of cleanliness from brush-off to white metal. After blasting, the water-and-air rinse removes soluble salts and other corrosives that can cling to the surface. If flash rust is a problem, the pump can siphon clean water from a static-holding tank that contains a premixed rust inhibitor solution to retard rust development on exposed steel.

Heat Input BTUH: 293, 982Heat Output BTUH: 258, 704Fuel Consumption: US GALH 2.17Heated Airflow CFM: 2530Temperature Rise (@64F) 126FPower Supply: 120V, 1 PH, 60 HertzFan Motor Power: 1 HP (1700 RPM)Current Rating AMPS: 11.80Max Length Flex Duct (1-Way): 75Max Length Flex Duct (2-Way): 35Flue Size: 6Tank Capacity: US GAL 27.7Run Time HOUR: 13Pre-Heated Oil FilterNo supervision required can be controlled by thermostat, humidistat or timer1ft power cordAISI 430 stainless steel combustion chamber with four-pass heat exchanger technologyAutomatic post ventilation cycle to cool down the combustion chamberElectronic flame control unitOverheating thermostat (safety device turns off unit and requires a manual reset)Fuel lines in hydrocarbon-resistant rubber wire-mesh protectedBayonet-type fuel tank capFuel tank drain plugElectric control panelOil filter; pre-heated oil filterCombustion air pressure switch (safety device turns off unit and requires a manual reset)10 pneumatic wheelsSingle Fuel Line Kit: This accessory allows the unit to recirculate hot oil from the return line back intothe filter. The hot oil in the filter eases restarts and increases the performance of the unit in extreme coldtemperatureWeight: 275lbsDimensions: 69 x 28 x 42

Harsco Recycled Glass 50lb Bags Medium GritProduct DescriptionHarsco Recycled Glass Medium GritBag weight 50lbs

Product DescriptionThis portable airline monitor connects easily to a breathing air filtration source or ambient air pumps and monitors the air for CO content. The audible alarm (90dbA) and light will activate when the CO level exceeds 10ppm (5ppm Canadian). External alarm and lights allow for the unit to be used in the closed position and eliminates damage and contamination of the internal components.