Post Buy Requirement
JC
United States
Add Review

Our Products #4948601

316 Stainless Steel Wire Cloth

Wire cloth is sold in several ways:By the roll in standard widths of 36" or 48" depending on the mesh size.In custom widths - Jelliff can slit it to any custom width.In custom shapes - Jelliff can fabricate into circles, squares, etc."To discuss your custom needs with our experts, call today 800-243-0052"
View Complete Details

304 Stainless Steel Wire Cloth

Wire cloth is sold in several ways:By the roll in standard widths of 36" or 48" depending on the mesh size.In custom widths - Jelliff can slit it to any custom width.In custom shapes - Jelliff can fabricate into circles, squares, etc."To discuss your custom needs with our experts, call today 800-243-0052"
View Complete Details

Gasketed Filter Cartridge Elements - Cylindrical

  • Nominal Element Length 10 in
  • Actual Element Length 9 3/4 in
  • Diameter 2 9/16 in
  • Nominal Element Length 10 in Actual Element Length 9 3/4 in Diameter 2 9/16 in Nominal Sc 74 in²
  • Assembly Crimped
Check up to five results to perform an action. larger imageManufactured in Type 304 or 316 Stainless Steel.Filtration Media is woven wire cloth. Standard filter elements are supplied with Buna-N gaskets.
View Complete Details

Gasketed Filter Cartridge Elements - Pleated

  • Nominal Element Length 10 in
  • Actual Element Length 9 3/4 in
  • Diameter 2 9/16 in
  • Nominal Screen Area 272 in²
  • Available Microns 5
Check up to five results to perform an action. larger imageManufactured in Type 304 or 316 Stainless Steel.Filtration Media is woven wire cloth. Standard filter elements are supplied with Buna-N gaskets.
View Complete Details

SuperStrong Monofilament Polyester

  • SEST150WT60 150
  • SEST160GS40 160
  • SEST160GS51 160
  • SEST160GS60 160
  • SEST160GS80 160
The Stable, High Strength Low Elongation Choice. In White or Gold. The high tensile strength of Super Strong permits higher screen tensions while maintaining dimensional stability. Other benefits include equal elongation of warp and weft, minimum loss of tension after stretching and minimum off-contact.An ideal choice for all your graphic and UV applications.
View Complete Details

Estertex Monofilament Polyester

  • SEST030W040 030
  • SEST030W051 030
  • SEST030W060 030
  • SEST040W040 040
  • SEST040W051 040
The Choice for Fine Detail and Long Production runs. In White or Gold. Estertex delivers good ink flow.In addition, it provides easier screen reclamation as it allows only minimal lodging of ink between the threads.An ideal choice for all your textile applications.
View Complete Details

JELLIFF Alloy C Electrical Resistance Alloy

  • Wire Type Alloy C
  • Size: 19 gauge 0.036 in
  • Ohms per Foot 0.5208
  • Nominal Composition 60 Ni-16 Cr bal. Fe
  • Resistivity at 25ºC 112 µcm 675 O/cmf
ELLIFF Alloy C is widely used in fixed and variable resistors in radio and electronic equipment. Potentiometers, automatic controlling devices, industrial and motion-picture rheostats, and other types of resistors where compactness is desired use Jelliff Alloy C. High operating temperature of 1700F. makes Jelliff Alloy C desirable as electric heating elements in toasters, flat irons, percolators and other types of domestic appliances. Bare wire will be provided unless other tolerances are required. This is sold by the pound, although some other companies sell it by length. "Call for custom products."
View Complete Details

Nylon Filtration Media

  • Material Nylon Polyester
  • Type Monofilament Multifilament
  • Width 72 in
  • Item # Filtration Media
  • Mesh Count Variable
Jelliff is a long-time supplier of Wet Filtration Fabrics. Available in Nylon and Polyester Monofilament and Multifilament Specifications. Monofilament, 72" wide, is available from 800 micron through 40 micron.Polyester Multifilament, 72 wide, is available from 800 micron through 100 micron. Rings and Flange tops for filter bag applications are available from stock.
View Complete Details

Screen Packs

Extruder-Screen Packs JELLIFF CORPORATION can supply a complete range of sizes and shapes of screens in steel and stainless steel. Our new fabricating facility located in Hickory, North Carolina can fill your extruder screen requirements in a prompt and economical fashion. Also available are spot-welded and aluminum bound screen packs. We are one of the largest manufacturers of extruder screens. We are certain that we can reduce your present costs while supplying you with a quality product. We welcome the opportunity to quote your next extruder screen requirement. Please select Request InformationQuote and provide your specifications.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Jelliff Corp.)
  • Southport, CT 06890, United States
  • Share us via