Post Your Requirement Menu

Welcome User

Other Products / Services

Our Complete range of products are press felts, Paper Machine Headbox, Spiral Dryer Fabric, SS Wire Mesh for paper making machine and Doctor Blade for paper making.

Press felt/paper making felt /dryer fabric/MG felt for paper machine

888 /Square Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Press Felts
  • Material Nylon
  • Thickness Customized
  • Color White
  • Feature High Tensile Strength
  • Pattern Plain
  • Width AS TO ORDER
  • Country of Origin Xuzhou
  • Brand Name LEIZHAN
  • Application Paper Machine
  • Name Press felt /paper making felt /dryer felt/MG felt
  • Structure Single Layer/Double Layer/Triple Layer
  • Usage paper machine

  single layer press felt  paper machine type: kinds of paper machine machine speed: ≤500m/min paper weight: ≥8g/m²kinds of paper linear pressure:≤100kn/m strength: ≥2000n/5cm double-layer bom is double warp structure bom. according to paper machine and  double layer press felt : paper machine type: kinds of paper machine machine speed: ≥100m/min paper weight: ≥12g/m²kinds of paper linear pressure:≥100kn/m strength: ≥3000n/5cm triple layer press felt : paper machine type: kinds of paper machine machine speed: ≥200m/min paper weight: ≥40g/m²kinds of paper linear pressure:≥200kn/m strength: ≥4000n/5cm

Additional Information:

Payment Terms : L/C, T/T, Western Union

Packaging Details : Standard Export packing

Delivery Time : 30 days

View Complete Details

Paper Machine Headbox

3.70 Lac - 4.59 Cr /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Finishing Polished
  • Usage Steel Industry, Paper Machine
  • Type Forming Fabrics
  • Brand Name Leizhan
  • Material Cast Iron
  • Certification ISO9001
  • Color Green
  • Country of Origin China
  • Suitable Paper machine forming section

Polyester Forming Fabric  can be divided into single layer fabric, double layer fabric, two-and a half layer fabric and three-layer fabric according .   4-shed series single layer forming fabric have good drainability, light fabric mark , mainly used for producing cultural paper, electrostatic copying paper, news paper .   5-shed series single layer forming fabric , its fabric surface is wear resistant, better drainability than 4-shed, high fiber support index , good fluidity, long life time , mainly used for producing writing paper ,  printing paper,  news paper, paper for remanding higher drainability etc. Suitable for common fourdrinier paper machine.   8-shed single layer polyester forming fabric, its fabric surface is wear resistant, better drainability than 5-shed, long life time mainly used for producing kraft paper, cardboard , corrugated paper,  linerboard , etc.  Suitable for common fourdrinier paper machine.

Additional Information:

Payment Terms : L/C, T/T, Western Union

Packaging Details : Standard export packing

Delivery Time : 30days

View Complete Details

Spiral Dryer Fabric

814 /Square Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Material Polyester
  • Pattern woven
  • Country of Origin china
  • Waterproof Yes
  • Tensile Strength high
  • Structure woven fabric

 spiral dryer fabric the polyester spiral dry fabric is made of polyester monofilaments wound into a spiral loop, and the spiral loops are connected together by weft to form a spiral fabric. the spiral fabric has a smooth surface, good air permeability, high temperature resistance, and its own interface.it is widely used in the drying of the paper industry, the production of composite fabrics, the drying and conveying of food and medicine. the emergence of spiral fabric effectively guarantees the continuous production of modern industrial equipment and greatly improves production efficiency. flat woven dryer fabric the warp yarn is a flat wire with a 1/2 layer woven structure, which improves the running stability of the fabric. the double-warp woven structure concept improves the operation efficiency and reduces the pulling of the paper sheet by the dryer fabric, reduces the wear of the paper sheet on the dryer fabric, and improves the service life of the dryer fabric. the smooth surface of the dryer fabric greatly improves the heat transfer and drying capacity. round woven dryer fabric  it is a special structure woven dry fabric, which is woven with round high-strength warp and weft. the round warp yarn and uniform surface ensure the control of the paper sheet by the dryer fabric, and the double-layer woven structure improves the stability and running effect of the dryer fabric on the paper machine. the uniform and smooth surface of the drying fabric greatly improves the heat transfer and drying capacity.

Additional Information:

Payment Terms : L/C, T/T, Western Union

Packaging Details : Standards Export Packing

Delivery Time : 30 days

View Complete Details

SS Wire Mesh for paper making machine

1.48 k /Square Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Ss Wire Mesh
  • Material Stainless Steel
  • Application Filter, Paper Making Machine
  • Technique Welded Mesh
  • Weave Style Plain Weave
  • Wire Diameter AS TO ORDER
  • Wire Gauge AS TO ORDER
  • Country of Origin China
  • Brand Name Leizhan
  • Feature High Quality And Low Price
  • Usage PAPER MAKING

the stainless steel wire mesh has good corrosion resistance and abrasion resistance. it can be used as a pulp washing fabric , the inner and outer wires of the paper making cylinder mould , and the facing roller wire. it can also be used in mining, metallurgy, chemical, rubber, cement and other industries. for gas and liquid filtration and particle screening. material :  ss 304 , ss304l , ss306, ss306l weaving method: plain woven seam type:open type, endless type weld type:diagonal welded Advantages: 1.Has the acid and alkali resistance, wear resistance, high temperature resistant, long service life 2.With smooth surface, the tensile strength, permeability is good. 3.Install easy to use, interface without imprint 4.Strong Joint  

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Standard export packing

Delivery Time : 30 days

View Complete Details

Doctor Blade for paper making

740 /Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Doctor Blades
  • Material Carbon Steel
  • Shape Rectangular
  • Certification ISI Certified
  • Application Paper Making
  • Color Blade
  • Variety AS TO ORDER
  • Feature CLEANING
  • Packaging Type Paper Box
  • Country of Origin CHINA
  • Brand Name LEIZHAN
  • Printing Type CUSTOMIZED
  • Usage paper machine dryer section

carbon fiber doctor blade material :  2c/4c/6c/100 carbon fiber doctor blade major uses:    suitable for ceramic rolls, dryer rolls, ebonite rolls key features:  carbon fiber 100%.it is made of epo-glass fiber, with good lubricity and anti-abrasion. temperature resistance: 185 centigrade. bending strength: 790n/mm2 .

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Standard export packing

Delivery Time : 30 days

View Complete Details

Polyester Sludge Dewatering Belt

740 - 1.48 k /Square Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type sludge dewatering filter belt
  • Certification ISO 9001:2008
  • Application Wastewater Treatment
  • Weight 2000-3000kg
  • Color White, green
  • Condition New
  • Brand Name sludge dewatering filter belt
  • Material polyester
  • Production Capacity 10000 square meter/days
  • Usage filter belt

production description : sludge dewatering belt is one type of polyester filter belt. it is mainly used on belt filter press and belt thickener for sludge dewatering, food and beverage pressing, coal sludge dewatering, mine tailings drying and other filtration industries. structure of sludge  dewatering belt: sludge dewatering filter belt for fruit and vegetable squeezing application of sludge dewatering belt : 1) wastewater treatment (wwtp), municipal wastewater, industrial wastewater 2) coal tailings dewatering, mine tailings dewatering, sand washing, aggregate washing 3) pulp and paper sewage 4) fruit and vegetable squeezing 5) palm oil sludge dewatering 6) coconut milk processing 7) tapioca pulp dewatering 8) dairy sludge dewatering 9) winery sludge dewatering sludge dewatering filter belt for fruit and vegetable squeezing advantage of sludge dewatering belt : 1) good water permeability and air permeability. 2) easy to clean. 3) acid-resistance and alkali-resistance. 4) abrasion resistance. 5) stable property.

Additional Information:

Payment Terms : T/T, Western Union

Packaging Details : standards packing

Delivery Time : 30days

View Complete Details

pressure sreen basket

44.40 k - 4.44 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Pressure Screen Basket
  • Material Stainless Steel
  • Shape Round
  • Thickness As To Order
  • Application Paper Making Making
  • Color Grey
  • Feature Attractive, Corrosion Ressistant, Good Quality
  • Condition New
  • Finishing Polished
  • Packaging Type Wooden Box
  • Warranty 1 Yr
  • Country of Origin China
  • Brand Name Stainless Steel Screen Basket
  • Length As To Order
  • Usage PAPER PULP

product description outflow pressure screen basket is classified by the flow way of the pulp, the rotary wing spins in the basket to make the pulp flow out from the slot naturally to get good pulp with different purpose. it can be used in many links in pulp and paper line. inflow pressure screen basket is classified by the flow way of the pulp, but the inflow pressure is divided to out rotary wing and inner rotary wing. the characteristic of out rotary wing inner flow pressure screen is that the rotary wing is in the outside of screen. when it works, the heavy impurity in the pulp can be tossed outside due to centrifugal.  suitable for all kinds pressure screen of pulp system: 1.standard hole diameter:more than φ1.2mm    plate thickness:δ6mm-12mm 2.screen slot:more than 0.1mm    plate thickness:δ6mm-12mm advanced technology, high machining accuracy, long service life  bar coating guarantee more than 0.20 mm

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standards packing

Delivery Time : 30days

View Complete Details

round woven dryer fabric

740 - 1.33 k /Square Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Width as to order
  • Packaging Type wooden box
  • Diameter (mm) as to order
  • Usage Paper Making Machine
  • Material polyester
  • Certification ISO 9001:2008 Certified
  • Color White
  • Pattern Plain
  • Warranty 1 Year
  • Country of Origin China
  • Tensile Strength high
  • Name polyester woven round dryer fabric

The dry screen play an important role in paper macking machine. It is a high-breathing fabric applied to the dryer section of the long-wire paper machine and the board machine. It is made of various plastic synthetic fibers as the main raw material, and is processed by weaving and heat setting. Special resin treatment is carried out as needed, and the joints of the net are also advanced.  The main function of the dryer screen is to improve the contact between the paper sheet and the dryer during the process of guiding the wet paper sheet through the drying section, to obtain high yield, low energy consumption, and good performance on the paper surface. This requires the dry mesh to have sufficient strength, proper ventilation, good size, stability and smooth mesh surface. Our Product advantages are : 1. Acid resistance, alkali resistance, wear resistance, high temperature resistance, long service life, which is several times of the woven dry blanket, canvas and ordinary dry net. 2. Flat mesh surface, high tensile strength, good permeability and high heat transfer efficiency. 3. Easy to install and use, no imprinting on the interface, and no deformation during use.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standards packing

Delivery Time : 30days

View Complete Details

dryer cylinder

3.70 Lac - 7.40 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Dryer Cylinder
  • Material Stainless Steel, Cast Iron
  • Shape Cylindrical
  • Application Paper Making Machine
  • Color Metallic
  • Feature Corrosion Resistant, High Performance, High Quality
  • Condition New
  • Finishing Polished
  • Automatic Grade Semi-Automatic
  • Warranty 1 Yr
  • Country of Origin China

dryer cylinder description  dryer cylinder is divided into : cast iron dryer cylinder, steel dryer cylinder, yankee dryer cylinder all dryer cylinders, heads and journals are made of special cast iron. separate journals are bolted onto the dryer heads. dryer shells are ground on the outside and turned on the inside. all dryer journals with steam or condensate pipes have insulation sleeves. the inner surfaces have grooves for the stationary siphons. the front side ends of all dryers contain manholes. cast iron material are excellent in durability.this is because the free form flake graphite in the cast iron material ensured its high corrosion and erosion resistance. the cast iron also has good fatigue strength under the pressure roller forces. at the same time, cast iron itself has a good surface performance, does not need metal spraying treatment like steel dryer. a yankee dryer cylinder is a pressure vessel used in the production of tissue paper. on the yankee dryer cylinder, the paper goes from approximately 42-45% dryness to just over 89% dryness. in industry, mg cylinders or yankee dryers are primarily used to remove excess moisture from pulp that is about to be converted into paper. the yankee cylinder can be equipped with a doctor blade and sprayed with adhesives to make the paper stick. creping is done by the yankee's doctor blade that is scraping the dry paper off the cylinder surface thereby crêping the paper. the crinkle (crêping) is controlled by the strength of the adhesive, geometry of the doctor blade, speed difference between the yankee and final section of the paper machine and paper pulp characteristics.  

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standards packing

Delivery Time : 50days

View Complete Details

cylinder mould

74 k - 14.80 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Usage paper making pulp

Cylinder is the main part in cylinder paper machine on which the paper width is formed.It is required to filter water evenly and not produce too much stirring in the trough when rotating.The cage should have sufficient stiffness and accurate geometry and should be installed horizontally. The rotary shaft is fitted with a brass support bar device called spokes, with spokes spaced 100-150mm apart.The spokes support the central rim of the wheel, which is surrounded by grooves with horizontal bars of the same length as the net cage. The horizontal strip is about 1cm in diameter and 4cm from the center, parallel to the central axis.The bar is made of steel or brass and the section may be round or rectangular.There are protruding wheel rings on the outermost wheel rings, which are used to seal the corresponding parts of the net groove, so as to isolate the inside and outside of the cylinder.In the horizontal bar according to the spiral milling out of serrated groove, with a continuous diameter of about 3mm of metal wire spiral wound in the cylinder, then form a cage cylinder frame.The gap between adjacent wires is about 1cm. Finally, the copper wire is first covered with a thick brass or stainless steel inner mesh, and then covered with a thin surface mesh for paper making.In the wire and face wire are terminal net, is a special tool to tighten in the cylinder frame, with silver welding or welding butt up.The final assembly must concentric with the central shaft, and its stiffness should be sufficient to withstand the pressure of the volute roll without deformation. The cylinder bearing device is outside the net groove.The two ends of the cylinder are connected with the side box of the net slot.Slurry after the Internet, through the copper mesh filter into the cylinder of white water, from both ends of the cylinder into the side box, and then out of the white water pump circulation.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standards packing

Delivery Time : 30 days

View Complete Details

Jumbo suction press roll for paper making

74 k - 37 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Paper Making Press Roll
  • Material Tissue /kraft /test Liner /writing Paper
  • Certification ISO 9001:2008
  • Application Paper Making Machine
  • Country of Origin China
  • Brand Name Leizhan
  • Raw Material Stainless Steel
  • Paper Type As To Order
  • Usage paper machine

a fourdrinier paper machine generally has seventy or eighty rubber rolls. there are many types of press rolls, which can be divided into   rubber press roll , grooved press roll , jumbo rubber press roll, jumbo blind drill press roll, vacuum suction press roll , press suction couch roll , suction pickup roll , dryer felt roll , breast roll , wire guide roll, drive wire roll , suction touch roll , couch roll and etc. rubber press roll   is more important to provide good elasticity and ease the pressing effect of the upper press roll on the wet paper and felt, thereby prolonging the service life of the felt and reducing the "compression" of the wet paper. the elastic encapsulated lower roller can also give the two rollers good contact and uniform dehydration effects, and compensate for the high error of the lower pressure roller. the rubber hardness of the rubber roller in the production of general paper is usually 70 to 90 shore hardness. rubber rollers used for each press in the press section. jumbo press roll  usually refers to a nip composed of pressing rollers which a diameter of more than 1000mm. it is often used in the production of corrugated paper, cardboard, and other paper or cardboard with large basis weight. normally, the paper machine adopts this technology has the feature of high speed, low energy consumption, and good paper quality. therefore, jumbo pressing technology and equipment have become the first choice in the speed-up and energy-saving of old paper machines and the design of new paper machines. vacuum suction press roll  is mostly used in medium and high speed paper machines . the function of the vacuum chamber is only to suck the air in the shell holes. the thicker the roll shell, the more air volume is sucked.   therefore, the use of high-strength metal to make a vacuum suction press roll with a thin roll shell is beneficial to improve the efficiency of press dehydration.  

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standards packing

Delivery Time : 30 days

View Complete Details

Dewatering Elements/ Forming plate/vacuum/ceramic suction box cover

1.48 k - 11.10 k /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Dewatering Elements
  • Certification ISO 9001:2008
  • Application Paper Machine Forming Section
  • Feature Easy To Operate, Good Capacity, High Performance, Long Life
  • Condition New
  • Driven Type Hydraulic
  • Warranty 2years
  • Country of Origin China
  • Brand Name Leizhan
  • Material Stainless Steel /cerramic/PE
  • Function DEWATERING
  • Usage PAPER MACHINE FORMING SECTION

the special design structure of the  forming plate/board  is that it can be installed near the breast roller, or the breast roller scraper can be installed. it can move forwards and backwards, and can be adjusted to the best spraying point of the slurry, so that it can achieve a good sheet forming and dewatering effect. . the forming board is composed of a box body and a panel. the box body is made of stainless steel.the box body is annealed or moved to eliminate stress, reduce deformation, so as to ensure quality, and the surface is sandblasted to make the appearance beautiful and generous. the structure design of the wiper board is reasonable. according to the paper machine, paper type, and vehicle speed, the angle of the back panel can be designed to be 0~2.5 degrees to improve the dehydration effect and the formation of the paper. the dehydration board is composed of a box body and a panel. the box body is made of stainless steel.the box body is annealed or moved to eliminate stress, reduce deformation, so as to ensure quality, and the surface is sandblasted to make the appearance beautiful and generous. the structure design of the wiper board is reasonable. according to the paper machine, paper type, and vehicle speed, the angle of the back panel can be designed to be 0~2.5 degrees to improve the dehydration effect and the formation of the paper. the dehydration board is composed of a box body and a panel. the box body is made of stainless steel.the box body is annealed or moved to eliminate stress, reduce deformation, so as to ensure quality, and the surface is sandblasted to make the appearance beautiful and generous.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standard packing

Delivery Time : 35 days

View Complete Details

gear box for paper pulp making

7.40 k - 3.70 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Packaging Type Wooden Box
  • Motor Power as to order
  • Usage Chemical Machinery, paper pulp making
  • Specialities Long Life, High Performance
  • Brand Name leizhan
  • Material Stainless Seel
  • Style vertical or horizontal
  • Color Green
  • Condition New
  • Finishing Polished
  • Driven Type Electric
  • Warranty 2 Years
  • Country of Origin China
  • Power Rate 3-6 Kw

he  gearbox   is generally used for low-speed and high-torque transmission equipment. The power of the electric motor, internal combustion engine or other high-speed operation is achieved through the gear of the input shaft of the reducer meshing with the large gear on the output shaft. The ratio of the number of teeth is the transmission ratio. There four type gearbox for paper mill, pls check the follow informations: 1. Worm/spiral bevel gear reducer is manufactured in accordance with international technical requirements and has a high technological content. 2. It saves space, is reliable and durable, with high overload capacity, and the power can reach more than 200KW. 3. Low energy consumption, superior performance, and the reducer efficiency is as high as 95%. 4. K spiral bevel gear reducer has low vibration, low noise and high energy saving. 5. The spiral bevel gear reducer is made of high-quality steel material, rigid cast iron box, and the surface of the gear is high-frequency heat treated. 6. After precision processing, the reducer that forms the transmission assembly of helical gears, bevel gears and bevel gears is equipped with various types of motors, forming an electromechanical integration, which fully guarantees the quality characteristics of the geared motor products.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standard packing

Delivery Time : 30days

View Complete Details

cleaner for paper pulp making

74 k - 37 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Pressure Low Pressure, Medium Pressure, High Pressure
  • Speciality High Performance
  • Usage Industrial
  • Packaging Type Wooden Box
  • Warranty 2 Years
  • Country of Origin China
  • Corrosion Resistance Yes
  • Machine Structure Horizontal

ceramic /nylon cones/nozzle for paper pulp :   paper making cleaner in pulp making line takes up less space. due to small working pressure difference and big diameter of tailing nozzle, it prevents the cleaner nozzle clogging, keep the sludge discharge unobstructed and work well.it is especially suitable for urification of the waste paper pulping process and  it has excellent performance. ceramic cleaner cone   can ensure high retention rate of high quality pulp and achieve best cleaning effect with wear, corrosion and shock resistance features. leizhan can manufacture different types of cleaner cones based on customers' requirements.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standard packing

Delivery Time : 45days

View Complete Details

inflow/outflow /up flow/ inner / fine /coarse press screen for paper pulp

74 k - 7.40 Lac /Piece
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Pressure Screen
  • Application Paper Pulp Making
  • Voltage 380V
  • Condition New
  • Power As To Order
  • Warranty 2 Yrs
  • Country of Origin China
  • Screen Cut Scope 0.15~0.5mm

paper machinery of pressure screen for waste paper recycling production line is used for the screening of low consistency pulp before the paper machine.it can effectively remove impurities and breakup the pulp materials to increase paper quality. it can be used in fine screen section of dip deinking system, it is used for removing gooey and ink particles and other impurities.  1.under the pressure of centrifugal movement from rotor, the impurity moves around the outside part of screen basket. since the impurity moves quite far away from screen basket, the service life of screen basket can be increased due to less wear. 2.the pulp rotating movement offsets some part of positive pulse at the moment that it flows through rotor, thus the positive pulse created by the rotor decreases, which results in mild screening of impurity from pulp. 3.lower pulse help in sending pulp into headbox of paper machine in a stable condition so that the paper machine can run stably and less broken ends can be created. 4.the design of inflow approach screen helps in more througput, lower energy consumption, higher screening efficiency and less rejects.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standard packing

Delivery Time : 50days

View Complete Details

paper making forming fabric for paper machine

740 - 1.85 k /Square Meter
Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Fabric Layer 1 /1.5/2/2.5/3 Layer
  • Speed Below 1800m/Min

paper making polyester forming wire can be divided into 4-shed, 5-shed, 8-shed, 16-shed, 24-shed according to the weaving type, etc. paper making polyester forming wire can be divided into single layer fabric, double layer fabric, two-and a half layer fabric and three-layer fabric according to the category. application: printing paper, dictionary paper, offset printing paper, newsprint , wrap paper, tissue paper and the surface pulp, lining pulp, core pulp and bottom pulp of the board paper , glazed paper, packing paper, common newsprint and  etc.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standard packing

Delivery Time : 30days

View Complete Details

screen plate /rotor for paper pulp

740 - 14.80 k /Piece
Get Latest Price
  • Min. Order (MOQ) 1
  • Main Function Recycled Paper Pulp

Screen plate is used in the screen basket. Screening equipment is an important operational system for pulp processing. Screen plate is situated in pulper. The stator and rotor are placed on the screen plate. Pulper has a rotor inside the machine that grinds and mixes the pulp evenly. Screen plate work as a strainer that separates large, uncut particles from pulp to separate and collect them to other containers. The pulp is passed through the strainer for further procedure. Contaminants stay collected on screen plate and don't mix with the pulp. Screen plate works continuously into the water. Therefore, it has to be made by corrosion resistance material. Screen plate is made of stainless steel as it has to work continuously in water. Screen plate is easy in installation and has a long life. Screen plate works efficiently into pulper and separates the contaminants from the pulp. The pressure screen rotor rotates inside or outside the screen basket, and the rotor on the rotor runs close to the screen basket. At the front of the rotor, the rotor exerts pressure on the pulp, allowing the pulp to pass quickly. At the rear of the rotor, a negative pressure is formed, and the purified slurry backwashes the screen basket to prevent the screen holes from being blocked.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : standards packing

Delivery Time : 30 days

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Jenny
  • Room 1-467, Block F, Hexin Commercial Plaza, Gulou District, Xuzhou city, xuzhou, United States