Post Buy Requirement
JM
United States
Add Review

Our Products

Tubular Exchangers

  • Make Perry Products
  • Model FTSS-20-1231
  • Quality Used
  • Headline 1231 SF SS Tube & Shell 300# T&S
Unused- Perry Products Single Pass Shell & Tube Heat Exchanger, 1, 231 Square Feet, Model FTSS-20-1231, Horizontal. 304L Stainless steel shell rated Full Vacuum & 300 psi at -50 to 300 degrees F. (317) 34" Diameter x 20' long 304L stainless steel tubes rated Full Vacuum & 300 psi at -50 to 300 degrees F. 304L Stainless steel tubesheet, expansion joint and heads. Openings shell: (2) 8", tubes: (2) 6". Saddle mounted. National Board# 7272, serial# B-7231-1, built 2009.

TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details

Bag Unloaders

  • Quality Used
  • Headline Bulk Bag Unloader All SS w/Blower
Used Metal Fab Bulk Bag unloader with stainless contact parts Polaris hoist rack with I beam Ramsey Micro Tech 2000 with load cells and digital read out and Kaeser Omega blower model FB 350 with 20 HP 3ph multi volt motor. Four Sensor Tronics 65023-1.5 load cells. MetalFab Better weight feeder controls. Stainless steel MTS screw feeder and bin vibrator.
TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details

Basket Centrifuges

  • Make Tolhurst
  • Model 30 X 18
  • Quality Used
  • Headline 30 X 18 Tolhurst Perf SS solid bottom
Used Tolhurst Center slung 30 diameter X 18 high, perforated, solid bottom Centrifuge. All stainless steel contacts, basket, curb and feed tube, rinse pipe and with a hinge, gasketed cover. Has a Ketema Power hydraulic drive 10 HP 480V, 1735 RPM. Rated 7 GPM. 1500 PSI. Reported in excellent condition.
TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details

Compressors - Vacuum

  • Headline 20 HP Nash SC 4/7
  • Make Nash
  • Quality Used
Used Nash Liquid Ring Vacuum Pump, Size SC47, Carbon Steel. Flow rate of 10 Gallons per minute 25 to 28" Hg vacuum, approximate 300 cfm. Driven by a 20 hp, 360230460 volt, 1175 rpm motor. Includes a holding tank, and heat exchanger. Mounted on a carbon steel frame. Test#02D0574, built 2002.
TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details

Centrifuges - Desludger

  • Make Alfa Laval
  • Model AX 213
  • Quality Used
  • Headline 50 HP Alfa Laval AX 213 Clarifier
Used Alfa Laval AX 213 Ultra polishing disc type centrifuge. T316 Stainless steel contacts, 14, 200 X G force, hydro hermetic, clarifier bowl, centripedal pump, liquid discharge, cooling jacket on bowl cover. Belt drive configuration. Has 50 HP drive motor 360460V. Ideal for polishing and harvestingapplications such as brewery, winery, fruit juces, and pharmaceutical applications.
View Complete Details

Cone Mixers

  • Make ESMV
  • Model 10 Cu Ft
  • Quality Used
  • Headline 10 Cu Ft V-Blender SS
Used ESMV 10 Cubic Foot V-Blender, 304 Stainless Steel. (2) 18" diameter openings with covers. 8" diameter bottom outlet. Driven by a 3.5 hp, 230-460v, 1750-1460 rpm with a gearbox ratio of 112.59 to 1. Mounted on a carbon steel frame with casters.
View Complete Details

Exchangers - Plate

  • Make Tranter
  • Quality Used
  • Headline 123 Sq Ft Tranter SS Plate Exchanger
Used 123 sq ft Tranter plate heat exchanger, model GCP-026-M-5-NP-46, stainless steel plates, rated 100 psi at 150 f, 4" inletoutlet, new 2006.
TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details

Agitators

  • Make Falk
  • Model UltraMax
  • Quality Used
  • Headline 75 HP Falk Chain Sprocket
Used- Chain & Sprocket Motor & Gearbox Set Consisting Of: (1) Siemens Dutymax Induction motor, 75hp, 360230460 volt, 1180 rpm motor. Frame size 405T. (1) Falk UltraMax Gear Drive, model 2090FZ2A. Catalog power hp- 132, ratio 21.01 to 1, 14 gallon reservoir. Built 2006.
TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details

Compressors - Refrigeration

  • Make AEC Enginerring
  • Quality Used
  • Headline AEC Chiller 60 HP Cooling tower
AEC Engineering package water chiller model NECW consisting of 1-60 HP Copeland compressor 3 phase, 460 volt, with BAC cooling tower model FXT-99 has a 7 12 hp motor fan 220460V, 3ph and one return feed water tank.
View Complete Details

Compressors - Air

  • Make Sullair
  • Model 25-200H ACAC
  • Quality Used
  • Headline 200 HP Sullair Screw MDL 25-200H
Used- Sullair Rotary Screw Air Compressor, model 25-200H ACAC. Single stage, air cooled. Approximately 1218 cfm at 115125 psig. Driven by a 200 hp, 360460 volt, 1780 rpm motor. Includes a control panel and a filter. Skid mounted with a sound enclosure. 22, 054 hours on the meter.

TERMS: Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating is extra and will be quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If anything is returned it must be sent to the same location it was shipped from originally. Return freight is for the buyers account. Refunds will be made less any unpaid shipping cost when the unit is returned in same condition, as it was received. Some equipment from this site is listed from other sources. Confirmation of Sale will be needed from the seller to finalize a sale. All equipment is offered, as is, subject to prior sale or other disposition.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (JM Machinery, LLC)
  • Moorestown, NJ 08057 map, United States
  • Share us via