KCH Engineered Systems

Also known as Air Strippers or Aeration Towers Degasifiers are used in Drinking Water Treatment Facilities to remove odors caused by hydrogen sulfide (H2S). Degasifiers work by stripping dissolved H2S from water and reducing the overall odor of the water.Reduces odors and contaminants from water NSFANSI-61-G Certified Materials of construction for drinking water systems Capacities to 7 MGD in a single tower Low maintenance Designs to remove H₂S, CO₂, THMs, and VOCs POLYSTRONG® and POLYLAST® Material Maximum structural integrity and corrosion protection 100% UV Blockage prevents biological growth to reduce maintenance Scrubbing of off-gas can be provided by KCH for single source responsibility Applications: H2S odor removal at Municipal Drinking Water Treatment Plants VOC removal Groundwater remediation Carbon dioxide stripping KCH degasifiers are among the most trusted by the water treatment industry. They are able to strip H2S from millions of gallons of water per day and are also capable of removing VOCs, THM, carbon dioxide, and other compounds. They are available in our POLYSTRONG® and POLYLAST® materials when corrosion resistance is necessary. KCH can provide complete Aeration and Degasifier Systems with additional components such as: AMCA Rated Blowers Air Filters for Blowers Sound Eenclosures for Blowers Instrumentation and Controls Differential Pressure Indications Ducting (PVC or FRP) OSHA Approved Ladders and Platforms Cleaning Systems Odor Control Systems for Off-Gas Startup and Training

Ductwork is a critical component of Air Pollution Control Systems that route contaminated air to Air Scrubbers, Control Devices, or Exhaust Fans. KCH manufactures a variety of Corrosion-Resistant PVC, Polypropylene, and Fiberglass Ducting for use in industrial applications. KCH ductwork is welded, not flanged or glued. This guarantees a leak-free, corrosion-resistant duct system. KCH prides itself in creating ductwork that meet and exceed all of these criteria. Additionally, our Fireresist™ duct is Factory Mutual (FM) approved, and our designs and fabrications meet SMACNA and ACGIH standards. KCH offers nearly every assortment of ducting, connectors, elbows, laterals, and transitions. Like most KCH products, our ducting systems are custom designed on AutoCAD and fabricated from Polypropylene, PVC, Polystrong, or Polylast materials.

KCH manufactures a complete line of corrosion resistant Centrifugal Exhaust Fans and Blowers. Each is built of the highest quality materials to withstand corrosive fumes and gases. Our fans are AMCA Certified and independently tested for performance.KCH manufactures both Direct Drive or V-belt Drive Fans and Blowers. They are available in twenty standardized sizes with airflows up to 70, 000 CFM. Constructed of POLYLAST®, POLYSTRONG®, FRP, PVC, stainless steel and special alloys, our chemical resistant fans can be equipped with variable frequency drives to ramp down airflow when needed.

KCH designs, manufactures, and installs a variety of corrosion resistant scrubber systems for many applications requiring control of Hazardous Air Pollutants (HAPs) or control of noxious odors. Our scrubbers are available in corrosion resistant materials such as PVC, FRP, Polypropylene, POLYSTRONG®, POLYLAST®, and SS. Sizes from 100 CFM to 80, 000 CFM in one vessel. KCH Wet Scrubbers are available in three different configurations: Counter-current Vertical Flow (Phaser or Omni Series) Cross-current Horizontal Flow (Hedron Series) Bidirectional Flow (Low-Key Series)

Also known as Biotowers, Biotricklers, Bioscrubbing Systems, Bioscrubbers, and Biological Oxidation Systems KCH designs and manufactures a Biotrickling Filter System to remove high levels of hydrogen sulfide (H2S) gas and other odors from municipal and industrial processes. Our Biotrickling Filter Systems will effectively remove 99% of H2S without the use of dangerous chemicals. Instead of chemicals, a simple non-proprietary nutrient is used to promote biological growth on a synthetic media. The standard KCH Biotrickling Filter System incorporates an integral sump box and pump circulation system built into the vessel. KCH Biotricklers can also be designed for a rectangular low-profile configuration, utilizing a structured high-density media.

KCH designs and manufacturers a Carbon Adsorption System which is one of the most effective in removing total odors and VOCs from municipal and industrial processes. Designed for continuous use and built to withstand the elements, our Activated Carbon, Zeolite, or Activated Alumina-based Adsorption Systems can be used exclusively or in conjunction with other Air Pollution Control Technologies, such as Wet Chemical Scrubbers or Biotrickling Filters. Where certain applications require adsorption in combination with chemisorption, KCH offers a chemical impregnated adsorption media to achieve ultimate performance. The KCH Carbon Adsorption System is comprised of a vertical, cylindrical vessel with a domed or conical top. They are constructed in our facility from POLYLAST®, POLYSTRONG®, or other corrosion-resistant materials. KCH Vessels feature exceptional corrosion resistance and UV resistance, making them ideal for long-term intended service life and outdoor installations as required.