Our Products #4931395

Pear shaped roller ball shower curtain ring. Curved top design rolls virtually friction-free across metal or wood rods. Great for display booths or partition fixtures requiring a drape or curtain. Reduces the possibility of curtains ripping. Clips totally shut for a secure closure.
For use on up to 1-316" diameter rods or dowels
1-38" inside loop diameter
Five 516" diameter free spinning roller balls centered along the top
Solid brass with nickel plate
Packaged 100 per bag

By far our strongest magnet for maximum holding power. Extra heavy-duty rectangular metal casing containing an integrated ceramic magnetic block base. Use to display large format upright signs or heavy display products from metal surfaces such as gondola tops or pallet rack uprights. Mount with screws or common 316" pop rivets (not included). Removable and reusable. Warning: Holding capacity is the approximate maximum pull rating under ideal conditions. Always test suitability on per-application basis. For best results, use on an indoor, bare (unfinished) metal surface that is smooth and clean. Metal conditions will affect holding power. Magnets should not be used near electronic equipment.
12" overall height x 1-12" wide x 3" long
Each end has a slotted shaped hole measuring 0.202" wide x 0.355" long
Zinc plated steel housing

Three point rigid display foot that lifts, supports, and protects display corners flush and low-profile to the floor at fixed, 90 degree angles. Adheres to flat bottom corrugated displays and floor stands with permanent adhesive. Durable display corner glide that makes moving fixtures or displays easy.
Fixed 90 degree angle with both sides 2-12" from corner
Holds displays approximately 116" off the floor
Adhesive backed base
Clear ABS material
Packaged 200 per bag

Three-point display foot that lifts, supports and protects display corners 12" above the floor. For added strength for larger floor based displays use the center style, two-point support between the corners. Simply friction-fit each part to attach to corrugated bottom edges.
Holds up to 316" (C-Flute) corrugated 12" off the floor
Corner style is a fixed 90 degree angle and has corner dimensions of 2-12" x 2-12"
White styrene material

Extremely strong magnet for its small, compact size. Neodymium disk magnets are solid and do not have a center hole so mounting requires glue, adhesive andor counter boring. Small consistent radius edges equate to a smooth, burr-free product. Great for use as display door latches offering a secure closure and extra holding power. Best suited for indoor use. Warning: Magnets should not be used near electronic equipment. Due to their small size, please keep away from childrenpets.
Otherwise known as "Rare Earth Magnets"
Meets neodymium industry standard #4212 properties
Super powerful and compact

Rectangular metal casing having a full three ceramic magnetic base making this part stronger than our common 3" long magnet #107037. Use this heavy-duty magnet when more holding power is required. Perfect for larger upright signs or heavier displays. Two integrated mounting holes also offers additional strength benefits when attaching with screws or common 18" pop rivets - not included. Removable and reusable. Warning: Holding capacity is the approximate maximum pull rating under ideal conditions. Always test suitability on per-application basis. For best results, use on an indoor, bare (unfinished) metal surface that is smooth and clean. Metal conditions will affect holding power. Magnets should not be used near electronic equipment.
Available with optional non-scratch inserts
14" overall height x 78" wide x 3" long
Each end has a 18" diameter round hole
Also available with adhesive - please inquire
Nickel plated steel housing

Scan codes thru the clear facing. Economically hold and protect data tickets, UPC inserts or signs on shelving fronts or any clean, flat surface. Change labels with easy side or top insertionremoval. As an added bonus, integrated gripper fins along the top edge allow thin signs or advertisements to be held on the outside of the window, thus eliminating the need for additional clips. Can be cut with scissors to any length.
Designated to fit common 48" long shelves
Holds up to 1-38" height tickets
Custom lengths, heights, and additional back colors available - please inquire
Clear PVC material
Packaged 50 per box

For use in conjunction with our line of round Conduit Support Tubes (sold separately). Ingenious push-on type hanging clip that simply and securely snaps directly onto common 34" (0.922" O.D.) rigid EMT conduit without the need for any additional hardware such as nuts or bolts. Integrated sharp jagged teeth hold firm and resist removal when fully engaged on painted or plain steel conduit. Center hole on top is great for attaching metal hooks, locking rings, chain or cable. Warning: Use only in dry, indoor locations with clips placed a minimum of 34" inward from each end of the support tube. Removable and reusable.
No tools required
34" wide x 1-58" long with 932" diameter centered top hole
Also available in black or other colors - please inquire
0.027" thick zinc plated spring steel
Packaged 100 per bag

Simply peel and stick for a secure hold on smooth plaster or other solid flat ceiling surfaces. Integrated metal loop rotates so signs can be hung at perfect viewing angles.
1-14" overall length
Hang horizontally or vertically
Round base has adhesive backing
Loop is steel with zinc plate
Base is white polypropylene material
Packaged 100 per bag

Permanently lower your reach on very high ceilings to easily accessible heights. A quick and inexpensive way to suspend signs and displays horizontally from exposed solid or split beam open style warehouse ceilings. Can be used with our full line of Ladderless Hook Banner Hangers, or can be combined with Pear Clips or Snap Rings (sold separately) to lock signs into place. Also great for displaying sewnhemmed fabric or vinyl banners. No tools required. Each complete assembly requires one support tube and two or more cable assemblies - each sold separately. Each cable assembly includes our highly popular self-locking cable adjuster with a looped cable end assembly connected to a snap-on conduit hanging clip together in a convenient polybagged kit. Warning: Use only in dry, indoor locations with conduit hanging clips placed a minimum of 34" inward from each end on the support tube.
Cable is 116" dia. (7x7) galvanized steel x 30 ft. long
Conduit hanging clip is 34" wide x 1-58" long and is made of spring steel with zinc plate
Round support tube is rigid 34" EMT conduit (0.922" O.D.) x 0.049" metal wall thickness, painted white
10 ft. support tube requires an additional cable assembly hanging point located in the middle
Other cable and support tube lengths and colors available