Our Products

Track Roller Bearing

Plastic Outer
.75" outside diameter, .30" width
Durable celcon black plastic (a close equivalent to Delron)

2 Ball Bearing
Chromium steel

Stud
Threaded shaft
Nickel plated steel
Hex socket at center of stud
3 millimeter hex socket, .17" deep
Thread M4 X .7 metric

Load Capacity
40 lbs

Made in USA
RoHS Compliant

Custom plastic outer, stud, guide wheel, and threaded shaft designs can be quoted upon request.
Customer must test load capacity for suitability in there particular application.

Leveling Mount 3.86"

Base
Round SBR gray rubber
2.5" diameter, 1" height
Foot base spins and articulates 5 degrees
Non-skid

Threaded Mount
12-13 UNC x 2.5" Thread length
Zinc-plated steel
Mounting height can be adjusted by turning .75" hex at bottom of threads

Load Capacity
500 lbs per mount

Made in USA
RoHS Compliant

Machine leveling mount 3.86" in overall height can be easily assembled to mounting location using 316" hex socket
(shown in bottom of base picture)

WARNING: This hex socket under base must only be used for assembly driving the threaded shaft clockwise
(1210125-RB25)

Description



Anti-backlash nut
14-16 ACME thread
.250 Lead
Precision accuracy

Nut
Red Turcite lubricated plastic
1.09 .03 inch length
Free moving precision fit on Lead Screw
Anti-backlash feature spring loaded for accurate location.
Right hand thread, 4 start

Spring
Music wire, zinc plated

Leveling Mount 2.84"

Base
Tie down black elastomer plastic
1.5" width, .50" height
Foot base spins and articulates 5 degrees
Non-skid, Non-marking
Anti-static

Threaded Mount
12-13 UNC x 2" Thread length
304 Stainless steel
Mounting height can be adjusted by turning .75" hex at bottom of threads

Load Capacity
1500 lbs per mount

Made in USA
RoHS Compliant

Machine leveling mount 2.84" in overall height can be easily assembled to mounting location using 316" hex socket
(shown in bottom of base picture)

V-Groove Guide Track Roller
M5 Thread (Standard)

Outer
.77" diameter
.312" width
Steel nickel plated

Single Ball Bearings
Shielded bearing made of chromium steel

Stud
Nickle-plated Steel
Hex socket at center of stud
3 millimeter hex socket, .17" deep
Thread M5 x .8

Load Capacity
Radail Load 50 lbs
Static Thrust Load 25 lbs

Made in USA
RoHS Compliant

Customer must test load capacity for suitability in their particular application.
Custom Outer to Stud position, Outer, and Stud threaded shaft designs can be quoted upon request.

Leveling Mount 4.75"

Base
Round black nylon plastic
1.12" diameter, .44" height
Foot base spins and articulates 5 degrees
Non-marking

Threaded Mount
12-13 UNC x 4" Thread length
Zinc-plated steel
With .25" hex socket (.20" deep)
Mounting height can be adjusted by turning .75" hex at bottom of threads or by turning .25" hex socket

Load Capacity
3000 lbs per mount

Assemble in USA from US and Non-US components
RoHS Compliant

Machine leveling mount 4.75" in overall height can be easily assembled to mounting location using 316" hex socket
(shown in bottom of base picture)

Leveling Mount 8.84"

Base
Round black elastomer plastic
1.5" diameter, .50" height
Foot base spins and articulates 5 degrees
Non-skid, Non-marking
Anti-static

Threaded Mount
12-13 UNC x 8" Thread Length
Zinc-plated steel
Mounting height can be adjusted by turning .75" hex at bottom of threads

Load Capacity
2000 lbs per mount

Made in USA
RoHS Compliant

Machine leveling mount 8.84" in overall height can be easily assembled to mounting location using 316" hex socket
(shown in bottom of base picture)

WARNING: This hex socket under base must only be used for assembly driving the threaded shaft clockwise
(1210180-BB15)

Leveling Mount 3.97"

Base
Round black acetal plastic
2.0" diameter, .50" height
Foot base spins and articulates 5 degrees
Non-marking

Threaded Mount
34-10 UNC x 3" Thread length
Zinc-plated steel
Mounting height can be adjusted by turning 1.125" hex at bottom of threads

Load Capacity
7500 lbs per mount

Made in the USA
RoHS Compliant

Machine leveling mount 3.97" in overall height can be easily assembled to mounting location using 316" hex socket
(shown in bottom of base picture)