Post Buy Requirement
LI
United States
Add Review

Our Products

Cylindrical Mounts

  • Item 31963
  • Dimension – A (in) 3/8
  • Dimension – B (in) 1/2
  • Thread 10-32
  • Length (in) 3/8
Mounts provide isolation from noise and vibration. Product is typically positioned between a motor or fan and the mounting frame. The size and weight of the equipment will determine the size and durometer of the mount.
View Complete Details

Stem Bumpers

  • Item 12332B600
  • Dimension – A (in) 1/4
  • Dimension – B (in) 1/16
  • Dimension – C (in) 3/8
  • Dimension – D (in) 1/2
Stem Bumpers can be used as either a hole plug or push-in bumper. Select proper hole size based on dimension A.

Type Flat Bumper
Dimension A (in) 14
Dimension B (in) 116
Dimension C (in) 38
Dimension D (in) 12
Compound SBR
Durometer 60
View Complete Details

GROMMET BUMPERS

  • Item 12551B600
  • Dimension – A (in) 5/32
  • Dimension – B (in) 1/16
  • Dimension – C (in) 3/8
  • Dimension – D (in) 3/32
Grommet Bumpers are used as a rubber foot and can be easily inserted into a pre-drilled hole. It is best to drill the hole slightly smaller than the A dimension. Select panel thickness using the B dimension.Specifications
Type Flat Base
Dimension A (in) 532
Dimension B (in) 116
Dimension C (in) 38
Dimension D (in) 332
Dimension -E (in) 14
Dimension F (in) 1764
Compound SBR
Durometer 60
View Complete Details

Suction Cups

  • Item 27050I500
  • Dimension – A (in) 1
  • Dimension – B (in) 7/16
  • Dimension – C (in) 1/4
  • Screw (in) 8-32
Suction Cups are used as pickers to lift or hold fast to a smooth surface.
Type MS
Dimension A (in) 1
Dimension B (in) 716
Dimension C (in) 14
Screw (in) 8-32
Compound ISOPRENE
Durometer 50
View Complete Details

Symmetrical

  • Item 11209B600
  • Inner Diameter (in) 1/4
  • Groove Width (in) 1/8
  • Groove Diameter (in) 7/16
  • Outer Diameter (in) 5/8
Grommets are typically used for the insulation and protection of wires and cables that are run through a metal or plastic panel. Select size based on cable diameter (Inner Diameter), panel thickness (Groove Width), and hole diameter (Groove Diameter).
Inner Diameter (in) 14
Groove Width (in) 18
Groove Diameter (in) 716
Outer Diameter (in) 58
Overall Thickness (in) 14
Compound SBR
Durometer 60
View Complete Details

H Mounts

  • Item 36502
  • Dimension – A (in) 1.31
  • Dimension – B (in) .39
  • Dimension – C (in) .79
  • Dimension – D (in) 1.25
H Mounts provide isolation under more severe loads. Typical applications include engines and tractor cabs used on off-road equipment.
View Complete Details

Stem Bushings

  • Dimension 1/8
  • Dimension 1/4
  • Dimension 3/8
  • Dimension 7/64
  • Item 28013B600
Stem Bushings can be used as an insulator or spacer.

Specifications
Dimension A (in) 18
Dimension B (in) 14
Dimension C (in) 38
Dimension D (in) 764
Dimension E (in) 38
Compound SBR
Durometer 60
View Complete Details

T Mounts

  • Item 36004
  • Dimension – A (in) 1.25
  • Dimension – B (in) .41
  • Dimension – C (in) .95
  • Dimension – D (in) 1.44
T Mounts provide isolation and flexible suspension for mobile and portable equipment such as cabs, engines and compressors.

Type T Mounts
Dimension A (in) 1.25
Dimension B (in) .41
Dimension C (in) .95
Dimension D (in) 1.44
Dimension E (in) 1.07
Dimension F (in) .55
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Lakeview Industries, Inc.)
  • Chaska, MN 55318 map, United States
  • Share us via