Post Buy Requirement
LC
United States
Add Review

Our Products

  1. Clamps 3 Products available
  2. Nuts Bolts And Fasteners 11 Products available
  3. Metal Bolts 3 Products available
  4. Steel & Steel Products 4 Products available
  5. Cables And Wire Accessories 3 Products available
  6. Others 77 Products available

Other Products / Services

Locking Brake Levers

  • Item 165-508-008
  • Dimension Bmin.2 3.87 " 4.00 "
  • Dimension Bmax.3 5.47 " 5.60 "
Adjustable, over-center locking brake levers. No ratcheting, only ON (over-center) or OFF positions.
Easy adjusting knob allows 1.6" of cable to increase or decrease cable tension as needed to compensate for wear or load conditions.
Load link is fabricated of 4130 alloy steel. Normal operation capacity 1000 lb.
Ultimate load capacity 3000 lb (non-recurring static load).
Unless otherwise specified, levers include connecting hardware. Supplied with all required clevis pins, washers and cotter
View Complete Details

Water Bottle Cage Baby Blue Composite

  • Brand Name Clean Motion
  • Category Water Bottle Cages
  • Item CM430
  • Product Line Water Bottles & Cages
Water Bottle Cage Baby Blue Composite
- Only 38 grams
- Composite cages are made from tough poly carbonate that is virtually unbreakable and retains its shape
- Individually carded with UPC
View Complete Details

Cbl Seat Lock HD BK + S Hook

  • Brand Name Lexco
  • Item 824HD-BK-S
  • Product Line Locks
  • Category Cable Seat
Cbl Seat Lock HD BK + S Hook
- 24 length, heavy duty cable
- Includes S Hook
- Cable assembly with one loop larger than the other for a slip-knot application, ideal for securing the saddlec
View Complete Details

SS Swage Stud

SS Swage Stud:

SS swage studs are similar to MS21259. Notable differences include the type of stainless which is Type 316, thread pattern, UNC. Also, swage studs do not have an inspection hole.
View Complete Details

Black Powder Coating

Black Powder Coating,
Black powder coated cables are often used within the theater community, black coating reduces shinebrightness of cable.
View Complete Details

Threaded Terminals

Threaded terminals are a basic, simple and cost effective way to terminate a cable railing. All of the models below are SS Type 316. The machine thread goes thru the end post and a nut fastens on the back of the end post with the exception of the lag swage model which threads directly into a wooden post. The hand swage threaded terminal is designed for field installation. Machine swage threaded terminal is typically fabricated by Lexco because it requires hydraulic compression.
View Complete Details

Cablecraft Hardware & Accessories

The Cablecraft hardware youll find within here can be sold a la carte but we can also build it into your Cablecraft Push-Pull control.

Rod ends in a push-pull control have an external thread that conveniently threads into rod ends and ball joints. They are convenient, versatile linkage solutions.
Strap clevis are typically retained by a swaged cable fitting. There are circumstances where they can be placed onto threaded ends and retained by a nut. Strap clevis are best suited for pull-only controls. We also can supply thread-on clevis upon request.
Wire stops are typically used on commercial pull-only controls. They can be installed on up to a 18 inner cable.
U-Bolts and shim clamps allow you to mount and stabilize your Cablecraft push-pull control. This is important to reduce loss of energy during actuation.
View Complete Details

Bag Hunter Black

  • Brand Name Axiom
  • Item 402500-1
  • Product Line Bags & Baskets
  • Category Bags Pannier
Bag Hunter Black
- 600D water-resistant polyester
- semi-rigid design holds standard paper shopping bag
- quick detach hardware system sposi-lock
- folds flat when not in use
- includes shoulder strap
- 1318 cubic inch capacity
- 2.11lbs
- mounts to almost any rack
View Complete Details

Aluminum Button Stops

When hand crimped, aluminum button stops provide a holding strength approximately 13 that of rated cable strength, whereas, when machine swaged, up to 50% of the cable break strength can be achieved. This higher holding strength is one reason why Lexco prefers to prefabricate our customers cable assemblies. It is recommended that a pull test be performed to verify holding strength.



Aluminum button stops are available for cable diameters from 116 to 516. While the length of aluminum button stops are standard, they can be special ordered in longer lengths. For example, in 116, the standard length is 0.156, but Lexco also stocks an extra long 116 model with 0.397 length.

Lexcos aluminum button stops are available with certificates of RoHS conformance upon request.

Note: The holding strength of an aluminum button stop is affected by the construction of the cable onto which it is installed. A button stop installed on a 7x7 cable will yield a different holding strength than an identical button stop installed on a 1x19 cable, for example.
View Complete Details

Stainless Steel Button Stops BACT14A

Stainless steel button stops are also called stainless steel cylindrical terminals. They will hold to the breaking strength of the wire rope to which theyre attached (except for strand such as 1x7 and 1x19 construction wire rope). It is recommended that a pull test be performed to verify holding strength.

Standard stainless steel button stops are SS Type 303304, but they can be quoted in SS Type 316 upon request. See below for Boeing BACT14A.
View Complete Details

Copper Button Stops

A hand crimped copper button stop will provide a holding strength approximately 13 that of rated cable strength. Machine swaged copper button stops provide up to 50% of the cables break strength. Greater holding strength is one reason why Lexco prefers to prefabricate our customers cable assemblies. A pull test is always recommended to verify a button stops holding strength.

Copper button stops are available for cable diameters from 116 to 516. Standard button stops feature a plain finish. Zinc plated copper button stops are available upon request.
View Complete Details

Cable Jointers (Kwik-Loc)

  • Diameter 1/32” to 3/16”
Kwik-Loc cable jointers are ideal for numerous field-installed aircraft cable loop applications. They are a fast, reliable way to suspend static loads. Lexco Cable offers a variety of Kwik-Loccable jointers designed for use with varying weight loads and cable diameters from 132 to 316.
View Complete Details

Nylon Coating

  • diameter 3/64 thru 5/8
Most common two constructions for nylon coating are 7x7, 7x19 and upon special request we can supply 1x7, 1x19, 6x19 Class and 6x37 Class. Typical nylon coated diameters are 364 thru 58. The outside diameter is laser micrometer inspected during extrusion. Our extrusion line is equipped with a black ink printer capable of printing onto the nylon coating. Our nylon extrusion tooling is cleaned on a regular basis to improve the coating quality.

Common applications:
Conveyor
Fitness equipment
Mechanical control
Misc lanyards and tethers
Brake Cables
View Complete Details

Crimping Tools

  • Model 1SC (HSC600)
Lexco Cable carries a variety of cable crimping tools designed for use with cable from 132 to 38" in diameter. From the best-selling, versatile, 5-cavity Model 1SC (HSC600) to single cavity models to battery operated models to specialty architectural (cable railing) models, Lexco offers a wide selection.

These hand crimp tools are designed for crimping sleeves, crimping aluminum and copper button stops, and select other fittings, but are not universal and cannot be used to swage every wire rope fitting we offer. For example, some fittings that are typically not designed for manual or simple crimping include ball ends, stamped eyelets, and many threaded studsplugs. If you are unsure which cable crimping tool your application requires, or if you have questions about tools for specialty applications, please contact Lexco Cable for assistance.
View Complete Details

Pulleys

Swivel eye and solid eye pulleys are available. We can also quote on a custom sheave. Zinc die cast pulleys often used in fiber rope applications.
View Complete Details

Glass Shelf Fittings

  • Wire Size 1/8
  • Glass Size 3/8
The Glass Shelf Fitting works on 18" wire wit 38" thick glass
The Glass Shelf Fitting makes it easy to suspend glass shelves with cable for a modern look
Note: Lexco does not sell glass
View Complete Details

Fitness Cable Parts

Lexco Cable fabricates fitness cables for OEM or aftermarket replacement. Fitness cables will use some industrial fittings like thimbles, sleeves, threaded studs and single shank balls but fitness cable sometimes use specialty fittings. These include ball stoppers and thru hole cap screws. We can provide these items in bulk or pre-fabricated. We stock nylon coated cable for fitness cable applications. Fitness cable is widely used on weight lifting equipment.
View Complete Details

Wire Stop

  • Diameter 3/64 – 1/8
A typical use for a wire stop is on a push-pull control. The removable set screw allows the installer to route the cable and secure it into place. They are typically used on cable diameters of 364 18.
View Complete Details

Swageless Fittings

  • Diameter 1/16” to 1 ½”
Lexco Cable offers a variety of swageless end fittings for use in cable assembly systems from 116 to 1 diameter. Our swageless fittings require no* special tools for assembly, making field installation quick and easy. Most swageless cable end fittings will hold the maximum load of the cable to which theyre attached when installed correctly.
Swageless fittings are manufactured from self-colored steel, zinc plated steel, galvanized steel and stainless steel. Our large selection of swageless cable end fittings makes it easy to find the right one for your application. Swageless fittings:
Clevis (fork, jaw)
Eye end
Oval Eye, Drum Socket & Coupling Fittings
Threaded Stud
Turnbuckles
Non-Bearing Hooks and Eye Swivels
Lifeline Fittings
Safe-Line Clamps MIL-STD-16843, FF-C-450 Type IV
View Complete Details

Architectural Accessories

Heres some accessories such as fasteners that are useful in cable railing installations depending on your end fitting design. Some of the items include acorn nuts, beveled and flat washers and post protector sleeves. Please call us if you cannot find what youre looking for or have questions.
View Complete Details

Swageless Fittings Cable Railing

The one thing all of these Swageless Wire Rope Fittings have in common is that there is no crimping. The swageless fittings that youll find on this page are designed for cable railings. Theres two reasons for that, one is that theyre Type 316 SS and the other is theyre designed for normal working load limits needed to tension cable railing. The push-lock and pull-lock designs are the fastest to install because you insert the cable and it self-locks with the internal springs. The other designs utilize a plug (sometimes called a cone or wedge) which must be manually placed on to the center wire(s) prior to securing the outer fitting housing. These swageless wire fittings designed for wire rope fittings are field installed
View Complete Details

Threaded Plug

Threaded Plug:

Short overall length
Cost effective
Typically machined, swaged, hex
Threaded plugs do not necessarily hold 100% wire rope strength. A pull test is recommended for qualification. Of this product category, the threaded plugs are the most customizable.
View Complete Details

Eye Ends (MS20668)

  • Diameter 1/16” to 1”
Lexco Cables commercial and MIL SPEC MS20668 eye ends are manufactured from stainless steel. Commercial eye ends are typically made from 316 stainless steel, while MS20668 eye ends are SS304. Our MS20668 eye ends are made in the USA; commercial eye ends of both domestic and imported origin are available. Our eye ends are available in various sizes to accommodate cable from 116 to 1 in diameter.

Machine or roller swaging is required for installation.

Cable assemblies using eye ends can be quickly and easily connected to assemblies with fork ends by fitting the two together and inserting a clevis pin.

Our MS20668 eye ends do not include clevis pins or cotter pins (must be ordered separately).
View Complete Details

Cutting Tools

  • diameter 2mm and 3/4”
Lexco Cable is proud to distribute Felco cable cutters, the worlds recognized leader in precision cable cutters. Felco cable cutting tools are designed to cut cable between 2mm and 34 in diameter. They are built to last and easily outperform the competition.
View Complete Details

Generic Push-Pull Controls

  • Size 1/16*
There a few similarities between generic push-pull and non-push-pull cable assemblies.

1. Size reference. Most popular inner cable size is 116*

2. There arent support (guide) tubes on these assemblies

3. Many of our customers use a pull-only or return spring type

4. Most cable fitting are common air craft fittings used for non-push-pull as well

5. Typically this category uses Bowden conduit

5a. 316* Bowden also houses 116 inner cable

5b. Smaller diameter also called light duty

5c. We work best when we can pre-fabricate, however we can also supply large bulk quantities as well.
View Complete Details

Carbon Steel Button Stops

Our carbon steel button stops are machined from material specially selected for swaging. All carbon stops are designed to be machined swaged only. Compression via hydraulic press is required to achieve the correct post-swage diameter.
View Complete Details

Ring Eyes

A ring eye is manufactured by taking an eye bolt blank and drilling the shank with a blind hole for the wire rope.

The eye I.D. is larger than other wire rope eye fittings.
View Complete Details

Threaded Terminals With Receiver

Threaded terminals with receivers are a step up in design from threaded terminals with nut. The receiver hides some or all of the machine thread which makes for a cleaner look. Of all of the threaded terminals with receiver offered, Invisiware has the most minimalistic appearance. The Invisiware option you can choose multiple receiver lengths to match any end post. Also the Invisiware receivers are great for vertical cable rail applications.
View Complete Details

Open Swage Sockets

  • Inner Diameter 1/4" to 1-1/2”
Lexco Cable offers open swage sockets in both carbon steel and stainless steel material. Plating and galvanizing for carbon steel swage sockets is available upon request. Our open swage sockets are available in various standard sizes to accommodate cable from 14" to 1-12 in diameter. Clevis pins are typically included with all models.

Open swage sockets are extremely similar to forkjaw ends. However, open swage sockets have larger dimensions, most notably their clevis diameters, inside widths, and depths below pin. Additionally, open swage sockets are made from forgings, while forkjaw ends are either cast or machined.

Open swage sockets must be machine swaged for proper hold strength. Please contact a Lexco sales representative to receive an assembly quote.
View Complete Details

Pin Eye Terminals

  • diameter 1/8” to 3/4"
in eye terminals are distinguishable from other cable eye ends because of their head dimensions. The head is narrower and thicker than other eye end styles. Lexco Cables pin eye terminals are similar in design to our rod ends, the main difference being that pin eye terminals have been drilled with a cable hole.

Our pin eye terminals are drop-forged from self-coloring C-1035 carbon steel. Plating and galvanizing are available upon request. Stainless steel pin eye terminals are also available upon special request.

Our pin eye terminals are available in a range of sizes to accommodate wire rope from 18 to 34" in diameter.
View Complete Details

Closed Swage Sockets

  • Inner Diameter 1/4" to 3”
When installed onto general purpose wire rope, closed swage sockets offer up to five times longer life than spelter sockets. An independent research study has proven that swaged sockets have superior fatigue life than other commonly used types of boom pendants.

End fittings for large diameter wire ropes and strand are typically referred to as sockets. The word closed here indicates that there is an eye shape at the end of the fitting.

Lexco Cable offers closed swage sockets in carbon steel or stainless steel construction. Plating and galvanizing of carbon steel closed swage sockets is available upon request.

Our closed swage sockets are available in various sizes to accommodate cable from 14" to 3 in diameter.
View Complete Details

Cassette 9spd PG-950DH 11-32T

  • Brand Name Sram
  • Item 200289
  • Product Line Cassettes & Freewheels
  • Category Cassettes 9sp
Cassette 9spd PG-970 11-34T
- SRAM Power Glide II PG-970 9-Speed Cassettes fit Shimano-compatible freehub bodies
- Aluminum lockring
View Complete Details

Shackle: Anchor Galvanized RR-C-271 Grade A Import

Lexco Cables galvanized anchor shackles are manufactured to meet Federal Spec RR-C-271 Type IV-A Grade A. Galvanized carbon steel anchor shackles are the most common and widely used variety, as they are appropriate for both indoor and outdoor applications. Anchor shackles are bow shaped, similar to a boat anchor.

Anchor shackles are available with screw-pin, round-pin, and safety bold fastener options. We offer both domestic (Made in the USA) and imported galvanized anchor shackles. Please specify your preference of fastener and origin, if any.
View Complete Details

Snap Hooks, Spring Hooks

Bolt snaps, snap hooks, and trigger snaps are designed for fast, easy connections. Lexco Cable carries a large variety of both, in a range of sizes and shapes.

Snap hooks, bolt snaps, and trigger snaps are designed for light to heavy duty applications, from dog leashes to luggage to marine, agricultural, and construction applications. We stock zinc- and nickel-plated steel and stainless steel varieties. Our snap hooks and bolt snaps are available with an array of end connectors, including rigid eyes, swivel eyes, and clevises, to meet the needs of any application. Most bolt snaps and snap hooks feature spring-loaded closures opposite their end connectors, for fast and easy attachment.
View Complete Details

Fork 26 Straight Springer

  • Brand Name El Gordo
  • Category Lowrider Forks
  • Item 9488R26
  • Product Line Lowrider
Fork 26 Straight Springer
- Standard curve
- Straight springer
- 22.2mm
- Steerer 195mm
- Thread 100mm
View Complete Details

Die-Cast Fittings

Die cast wire rope and cable end fittings are created by injecting molten zinc directly onto a cable end inside a custom die. Lexco Cable offers die cast fittings made to your specifications, no matter how unique your design. Specialty shapes such as barrels, bullets, Z-shape, L-shape, and the like are easily manufacturable as die cast fittings. Some of our standard fittings, such as ball ends and eyelets can also be manufactured via die casting.

These fittings perform just as well as traditional fittings, and eliminate a good portion of the labor cost associated with conventional swaging. Most of our die cast fittings are made-to-order, and therefore require an associated tooling fee. However, customers with high volume orders may see significant cost savings over traditionally machined fittings.
View Complete Details

Theft-Resistant Cable Rail Systems

Lexco Cable has the components necessary to create a tamper- or theft-resistant architectural cable rail system for commercial and municipal applications where damage or theft may be of concern.

The key components for tamper- and theft-proof architectural cable railings are specialty end fittings. These jaw-end components utilize security bolts instead of traditional clevis pins, and can be fitted with special locking nuts for even greater safety and security.
View Complete Details

Architectural Installation Tools

  • diameter 3/8” or 5/16”
The tools youll find here within are designed for field installation of cable end fittings. Theres two types of tools within this product line. First, youll find three hand crimp tools which are 53-215 and 64-CGMP (64-CGMP is sold with or without a built in cutter). These three tools are compatible with 18 diameter and 316 diameter hand crimp cable end fittings. These hand crimp tools are sold and not rented.
View Complete Details

Strap Eyes (Commercial & NAS1435-E)

  • Diameter 3/64” and 3/16”
Lexco Cable offers both commercial and Naval-spec (NAS1435-E) strap eyes. When installed, a strap eye is not swaged directly onto the cable, but rather swivels on an end fitting such as a single shank ball, allowing the load to rotate without putting stress on the cable.

Commercial strap eyes are available in two types. The first mimics the dimensions of NAS1435-E strap eyes, while the second type does not. NAS1435-E strap eyes are manufactured from stainless steel Type 304. All our strap eyes are available in various sizes to accommodate standard cable diameters between 364 and 316.
View Complete Details

Stainless Steel Cable Railing 1x19 Strand

  • diameter 1/8" and 3/16"
18" and 316" diameter are used for residential cable railings.
316" or 14" are used for commercial cable railings.
1x19 construction is recommended for cable railings because it is ideal for linear runs.
Stainless steel Types 304 and 316 are recommended for cable railing application but other options can be quoted upon special request.
Other diameters are available upon special request.
View Complete Details

Clevises & Yoke Ends

Clevises feature female threading for fast and easy installation onto a threaded rod. We offer a wide range of clevis dimensions to meet our customers requirements.

Clevises are essentially custom items, as they must meet a range of specifications in order to be compatible with the connecting hardware. When requesting a quote for the clevises you need, please specify the following:

Thread: The thread size is required to ensure the rod will attach.
Grip: Distance between clevis ears must be specified in order to provide proper clearance for the connecting hardware.
Clevis Pin Hole: Whether Lexco is supplying your clevis pins or youre using your own, the hole size is important for correct clearance.
Material: We offer clevises in an array of materials; the clevis and threaded rod must be manufactured from compatible materials and finish for proper installation.
View Complete Details

Shackle: Chain Galvanized RR-C-271 Import

Galvanized chain shackles are also known as D shackles. Chain shackles are suitable for use in both indoor and outdoor applications. Lexco Cables galvanized chain shackles are manufactured to meet Federal Spec RR-C-217 Type IV-B. Chain shackles have an oval shape, similar to a link of chain.

Chain shackles are available with screw-pin, round-pin, and safety bolt fastener options. We offer both domestic (Made in the USA) and imported galvanized chain shackles. Please specify your preference of fastener and origin, if any.
View Complete Details

Round And D-Rings

D-Rings and round rings are often attached to the end of cable assemblies. They are used as hardware connections. Typically they are secured to the end of the cable via loop.
View Complete Details

Lanyard Mounting Tabs

Lexco Cable offers lanyard mounting tabs in plated and stainless steel varieties. They are specially designed for use as cable lanyard assembly hardware. Numerous sizes are available to meet your specific requirements.

A mounting tab is an alternative to a stamped eyelet or machined eye end. Mounting tabs have round pin-holes designed for installation via bolt or screw fastener.

A mounting tab is typically attached to a cable lanyard assembly via cable loop through one of the tabs holes. However, upon request, Lexco can supply lanyard mounting tabs with split rings or retaining rings for installation.
View Complete Details

Mid-Link

Breaking strength equals three times the working load limit. Made from zinc plated forged steel, used to repair or lengthen chain for permanent or temporary use.
View Complete Details

Snap Hooks

Quick links are ideal for hardware attachment and myriad other applications, as they do not require tools for installation. They are easy to use, opening and closing with captive screw nuts. Lexco Cable offers these handy hardware components in zinc plated carbon steel and stainless steel construction. Multiple shapes are available, including standard, wide jaw, square, and others. Quick links are load rated, so please be sure to select the right size for your application

Lexco Cables standard quick links are intended for industrial applications. If you have a critical application, such as climbing, harness, or fall restraint, please notify your salesman so suitable product recommendations can be made. For example, high quality French-made options or alternative materials with higher load ratings are available upon special request.
View Complete Details

Marine Eyes

  • Diameter 1/16” to 1/2"
Lexco Cables marine eye cable fittings are manufactured from corrosion-resistant 316 stainless steel to help them withstand harsh outdoor and marine environments. Marine eyes are available in sizes to accommodate 116 to 12" diameter cable.

Our marine eyes are commercial grade, and are available from both domestic and import manufacturers. Marine eyes are similar to our eye ends in function and design, but are manufactured from 316 stainless steel (in lieu of 309 stainless) and include different sized pin holes.

Machine or roller swaging is required.
View Complete Details

Swage Toggle Jaws

  • Diameter 3/32” to 1/2"
Toggle jaws are distinct because the clevis portion is connected by a means which allows a pivoting motion. This toggle functionality reduces stress that can be a side effect of installing cable assemblies at an angle.

Lexco Cables toggle jaw fittings are machined from 316 stainless steel, and are available in range of sizes to accommodate cable from 332 to 12" in diameter. Clevis pins are included.

Toggle jaws must be machine swaged for proper hold strength. Please contact a Lexco sales representative to receive an assembly quote.

Swageless jaw ends are also available from Lexco.
View Complete Details

Four S Hook

If you have a load lifting, towing, or other heavy duty application, Lexco Cable has the right hooks to get the job done. We supply both domestic (Made in the USA) and imported hooks in drop forged steel alloy and stainless steel. We also carry S-hooks in various sizes. Our hooks are available with a variety of end connectors, including rigid eyes, swivel eyes, and clevises, for fast and easy attachment to wire rope, aircraft cable, or chain. Models with and without latch kits are available. S-hooks are commonly used in trailer safety applications. There are four S-hook classes, divided by tensile strength. Let your sales representative know if you need S-hooks with safety latches. S-hooks are not intended for overhead lifting.

View Complete Details

Strap Forks (Commercial & NAS1435-K)

Lexco Cable offers both commercial and Naval-spec (NAS1435-K) strap forks. When installed, a strap fork is not swaged directly onto the cable, but rather swivels on a separate end fitting, allowing the load to twist without putting tension on the cable.

NAS1435-K strap forks are designed to be installed via MS20664 single shank balls. The spherical shape of the single shank ball helps the fork to swivel. The shank of the single shank ball also provides a shoulder that protect the cable from friction.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Lexco Cable Manufacturers)
  • Norridge, IL 60706 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/lexco-cable-manufacturers/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0007457984{main}( ).../index.php:0
20.02272172008include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.06262894192include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.06803829896header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice