Welcome to Lorac Company Inc
Manufacturer / Exporter / Supplier Of Window Well Covers, Metal Cleaning, Powder Coating, High Temp Ceramic Coating
-
Year of Establishment
1987
-
Primary Business
Supplier
-
Number of Employees
10-49
Welcome to Lorac Company Inc
Manufacturer / Exporter / Supplier Of Window Well Covers, Metal Cleaning, Powder Coating, High Temp Ceramic Coating
Year of Establishment
1987
Primary Business
Supplier
Number of Employees
10-49
Powder-coating is a durable substitute for painting most any metal or aluminum item. It is an electrostatic process of applying a chosen color and texture of a powder using a specially designed powder-coating gun. The item to be coated is attached to a grounded rack, coated with the chosen powder, placed into a special oven and brought to a temperature of between 300 - 500 degrees. When removed from the oven and allowed to cool, the item is ready for use, requiring no additional drying time before being placed into service. WHAT COLORS ARE AVAILABLE? There are thousands of colors available. In addition to color, the powder used is determined on expected usage of the item. Consideration is given to amount of ultraviolet rays expected, caustic or abrasive environment, and to desired surface qualities. Smooth, textured, rough, satin, and gloss are all characteristics to be considered in choosing the powder. Powders, however, must be purchased in qualities you want the item to reflect. You cannot mix powders to achieve a different color or texture. WHAT ARE THE BENEFITS OF POWDER-COATING? There are many benefits of Powder-coating. Considered most beneficial would be the durability according to most experts of Powder-coating. Although one should not consider a Powder-coated item as having an indestructible coating, it does possess one of the most durable coatings available. The electrostatic process used in Powder-coating may allow coverage in difficult areas of an item that may be unobtainable by the typical liquid spray paint process. Also, many professionals and manufactures desire the quick turnaround time of Powder-coating where process time is important. HOW DOES THE COST OF POWDER-COATING COMPARE WITH PAINT? Although the original cost of having an item powder-coated rather than painted is generally higher, the long-term savings may prove the added expense justified. The longevity of the coated item is generally expected to be two or more times that of a painted item. WHAT KIND OF ITEMS ARE GOOD CANDIDATES FOR POWDER-COATING? Car wheels, bumpers, brackets and frames, motocycle parts, aviation and agriculture parts, lawn furniture, office furniture, racks fencing and grates, plus thousands of other metal and aluminum items.
Contact Mishelle Every 'LORAC-COVER'tm is custom made to provide an exact fit for your basement window-well. Covers can be ordered for your smaller traditional basement window, as well as the larger sized basement escape, or daylight window-well. Every 'LORAC-COVER' comes with a lockinghinged escape panel for emergency escape use. The light-panels are made from the toughest transparent plastic available. The escape panel is designed to provide security, yet are lightweight and provide ease of operation for even the youngest family member. Other manufacture's window well covers hinge their escape panels onto the house where debris on top of the cover could keep the escape panel from opening. The 'LORAC-COVER' is designed to open to the left or right. This will cause the debris to be thrown off to the side allowing the escape panel to fully open. Operational vents are located in the End Panels where practical, and can be operated from either inside or outside the unit. Although the 'LORAC-COVER' is designed to be installed watertight, some ventilation is essential. Generally, vents should be opened in the spring and closed when the temperature begins to drop to an uncomfortable level. Plant hooks are standard on the larger Daylight or Escape window-well covers. Window-well covers are manufactured from 22-24 galvanized material. The framework is powdercoated in your choice of numerous colors, or most any color can be special ordered. Window-well Escape Ladders are available in "foot-length" sizes, e.g., 3', 4', 5', 6', etc.
Lorac Company, Inc. provides a Large Indoor Abracive Blast facility to keep customers parts rolling. Thru Rain or Shine for Stubborn Steel parts we provide a Heat clean oven to Bake off layers of old paint so we can Blast it in the most effecient time. The Heat Cleaning process is Environmentally friendly, and a Safe way to Remove Hazardous Coatings.
Powder-coating is a durable substitute for painting most any metal or aluminum item. It is an electrostatic process of applying a chosen color and texture of a powder using a specially designed powder-coating gun. The item to be coated is attached to a grounded rack, coated with the chosen powder, placed into a special oven and brought to a temperature of between 300 - 500 degrees. When removed from the oven and allowed to cool, the item is ready for use, requiring no additional drying time before being placed into service. WHAT COLORS ARE AVAILABLE? There are thousands of colors available. In addition to color, the powder used is determined on expected usage of the item. Consideration is given to amount of ultraviolet rays expected, caustic or abrasive environment, and to desired surface qualities. Smooth, textured, rough, satin, and gloss are all characteristics to be considered in choosing the powder. Powders, however, must be purchased in qualities you want the item to reflect. You cannot mix powders to achieve a different color or texture. WHAT ARE THE BENEFITS OF POWDER-COATING? There are many benefits of Powder-coating. Considered most beneficial would be the durability according to most experts of Powder-coating. Although one should not consider a Powder-coated item as having an indestructible coating, it does possess one of the most durable coatings available. The electrostatic process used in Powder-coating may allow coverage in difficult areas of an item that may be unobtainable by the typical liquid spray paint process. Also, many professionals and manufactures desire the quick turnaround time of Powder-coating where process time is important. HOW DOES THE COST OF POWDER-COATING COMPARE WITH PAINT? Although the original cost of having an item powder-coated rather than painted is generally higher, the long-term savings may prove the added expense justified. The longevity of the coated item is generally expected to be two or more times that of a painted item. WHAT KIND OF ITEMS ARE GOOD CANDIDATES FOR POWDER-COATING? Car wheels, bumpers, brackets and frames, motocycle parts, aviation and agriculture parts, lawn furniture, office furniture, racks fencing and grates, plus thousands of other metal and aluminum items.
Share your thoughts with other customers for Lorac Company Inc
Add Review