LSP Industries, Inc.

The BlastMatic II is the ultimate Electronic Parts Ejector. By using the BlastMatic II’s Electronic Controls you tab in the précised instant during the stamping cycle when a blast of air is come on, as well as the length of time the air is to stay on to insure that the part is safely ejected from the die area. Costly unscientific trial and error cam adjustments are a thing of the past. The BlastMatic line offers an air ejection system for every application from the extremely sophisticated to the very basic. The Basic BlastMatic is an effective, economical alternative to the BlastMatic II, using some of its components less the electronic controls. In operation the Basic BlastMatic receives a signal from the Actuator Switch or a Solenoid Valve. • Computer Controlled Air Ejection • Key Pad Programs Time and Duration of the Air Blast • Proximity Sensor relays the Position of the Ram • Vortex Air Nozzle Pinpoints the Blast of Air • Small Amount of Air Delivers a Large Impact

The FloaterCoater is the roller coater of the future for the metal stamping industry today. It is constructed of stainless steel and with rolls that float with the movement of the coil stock. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The FloaterCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does on need lubrication, thus saving on lubricant cost. Rolls are held in such a manner that they can be removed and installed in minutes. All of the features of the FloaterCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system.

The MaxaMizer is a computer controlled, low pressure, airless spray system that dispenses lubricant from as many as twelve nozzles. A LSP computer controls the spraying of the lubricant and can be located remote from the manifold and the nozzles. The manifold can be up to eight feet from the controller and the nozzles can be up to eight feet from the manifold for a total of sixteen feet from the LSP computer. Ideal for large stamping presses, transfer presses, roll formers and other types of metal forming machines. The simplicity of the LSP MaxaMizer allows the lubricating systems to be set up in a matter of minutes on the press. Nozzles can be located on the press in two ways. They can be located on the press with strong magnets and repositioned when a new die is placed in the press. They can also be built into the die with in-die nozzles. Quick disconnects are used on the supply lines so that when a die is to be removed the lines are disconnected and the die removed. When the new die with in-die nozzles is inserted in the press the quick disconnect is reconnected and MaxiMizer is ready to go. The MaxaMizer controls allows the operator to shut off nozzles that are not needed for a particular die set up. The operator then has the ability to individually program each of the operating nozzles as to when they will spray and how much lubricant each nozzle will dispense during the cycle of the press. When dies are changed, nozzles that were inactive can be repositioned and reprogrammed and active nozzles can be deactivated until further need.

The MiniCoater is a line of roller coaters designed to dispense lubricant onto coil stock before it goes into the press area. They are small but sturdy, made of stainless steel to last a lifetime. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The MiniCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does not need lubrication, thus saving on lubricant cost. All of the features of the MiniCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system. MC-151 Complete system, includes the MC-101 MiniCoater, the E-310 Electronic Counter including the Proximity Sensor and 24 V Solenoid, and One Gallon Reservoir with Filter and 20 PSI Pop-Off Valve.

The B-Coater takes the guesswork out of lubricating blanks! Computer controlled for just the right amount of lubricant, the B-Coater eliminates spray bottles, brushes and rollers and ensures that every blank will be lubricated. It increases the speed of production, improves die life, lowers down time, reduces rejects and saves money.

Low Pressure Air Assist Lubricant Dispensing System or Airless Lubricating Dispensing System The MeterMizer is a positive displacement pump that dispenses lubricant into a low pressure steam of air or can dispense a controlled drop of fluid, void of air, to the work area. The low pressure air carries the lubricant to the work area and delivers it as a Minimum Quantity Lubrication non-fogging spray. The dispensing of the lubricant can be controlled with a manual OnOff valve, solenoid valve, LSP Electronic Controllers and the LSP Air Timer. It can dispense in predetermined repeatable actuations, single shots or be tied into a machine and dispense on each cycle of the machine. • Reduces Fluid Consumption • Near Dry Lubricating • Non Fogging Spray • Reduces Cost of Parts Cleanup • Keeps the Work Area Clean • Lubricant can be dispensed two ways: with a low velocity air assist or delivered as an airless drop • Cools and extends tool life