Our Products #4947293

Replaceable Head Hammers
Soft Head Hammer Heads:
> LSP Soft Head Hammers
> Brass Hammers
> Malleable Iron Hammers
Tapping Hammers Light work
Sledge Hammers For the Big Jobs
Oil Resistant, Contoured Yellow Safety Grip
Made in the USA

Hit hard with a soft blow
The term soft does not refer to the impact delivered, but to the contact made by these hammers. They have solid, heavy heads for good driving force, but the striking face yields readily on contact to prevent damage to the surface struck.

The BlastMatic II is the ultimate Electronic Parts Ejector. By using the BlastMatic IIs Electronic Controls you tab in the prcised instant during the stamping cycle when a blast of air is come on, as well as the length of time the air is to stay on to insure that the part is safely ejected from the die area. Costly unscientific trial and error cam adjustments are a thing of the past. The BlastMatic line offers an air ejection system for every application from the extremely sophisticated to the very basic.

The Basic BlastMatic is an effective, economical alternative to the BlastMatic II, using some of its components less the electronic controls. In operation the Basic BlastMatic receives a signal from the Actuator Switch or a Solenoid Valve.


Computer Controlled Air Ejection
Key Pad Programs Time and Duration of the Air Blast
Proximity Sensor relays the Position of the Ram
Vortex Air Nozzle Pinpoints the Blast of Air
Small Amount of Air Delivers a Large Impact

The LSP MagnaMist is used for all types of cutting tool lubricating operations such as grinding, sawing , milling, drilling, tapping and others. Whatever your metal removal requirements are, chances are there is a LSP Mist Coolant System that can dramatically improve the quality and productivity of your operation.

Minimize the Over-Spray
Minimize the Cleanup in the Work Area
Minimize Airborne Droplets of Fluids in the Air
Minimize Labor by Automating Dispensing of Fluids
Minimize the Amount of Fluids Used to Manufacture a Part
Minimize the Cleanup of Parts after Manufacturing is CompletedThe MinaMizer is aptly named because it minimizes the amount of air and fluid used in fine spray applications. It is common sense to use equipment sophisticated enough to dispense the least amount of fluid necessary to accomplish the right amount of coverage for a particular application. Using excess fluid accomplishes nothing except increasing material cost, part cleanup cost and machine cleanup cost.

The MinaMizer uses precision air and fluid regulators that hold true to their settings to maintain the fluid and air pressures being dispensed out the nozzles. Precision Needle valves control the volume of fluid being dispensed out of the nozzle. A variety of controls, both manual and computer controlled are offered to allow for individual preferences in setting up an installation.

The design of the MinaMizer Nozzle allows for an even, consistent, low pressure, low volume spray pattern. When the MinaMizer is activated a low pressure air assist allows the fluid to be dispensed in a light coating from a single or multiple nozzles. The low pressure breaks the fluid to be dispensed in a light coating from a single or multiple nozzles. All the nozzles, ( up to six) work in unison to cover large or small areas with an even coating. Nozzles can dispense fluid continuously or in an OnOff mode as directed by a LSP Electronic Controller.

The MaxaMizer is a computer controlled, low pressure, airless spray system that dispenses lubricant from as many as twelve nozzles. A LSP computer controls the spraying of the lubricant and can be located remote from the manifold and the nozzles. The manifold can be up to eight feet from the controller and the nozzles can be up to eight feet from the manifold for a total of sixteen feet from the LSP computer. Ideal for large stamping presses, transfer presses, roll formers and other types of metal forming machines.


The simplicity of the LSP MaxaMizer allows the lubricating systems to be set up in a matter of minutes on the press. Nozzles can be located on the press in two ways. They can be located on the press with strong magnets and repositioned when a new die is placed in the press. They can also be built into the die with in-die nozzles. Quick disconnects are used on the supply lines so that when a die is to be removed the lines are disconnected and the die removed. When the new die with in-die nozzles is inserted in the press the quick disconnect is reconnected and MaxiMizer is ready to go.
The MaxaMizer controls allows the operator to shut off nozzles that are not needed for a particular die set up. The operator then has the ability to individually program each of the operating nozzles as to when they will spray and how much lubricant each nozzle will dispense during the cycle of the press. When dies are changed, nozzles that were inactive can be repositioned and reprogrammed and active nozzles can be deactivated until further need.

he ExpandaFold, a state-of-the-art manifold system that uses less fittings, has less joints, eliminates leaks and cleans up the unsightly messes associated with makeshift manifolds. Whether it is used to transport air or fluid, the ExpandaFold will transform manifold chaos to impeccable order. See how easy it is to replace that sloppy, leaking and inefficient distribution system with LSP Industries ExpandaFold system. ExpandaValves are designed to be assembled into manifolds with screws, pipe andor tubing. It's that simple! They can be assembled in a variety of configurations.

The MiniCoater is a line of roller coaters designed to dispense lubricant onto coil stock before it goes into the press area. They are small but sturdy, made of stainless steel to last a lifetime. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The MiniCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does not need lubrication, thus saving on lubricant cost. All of the features of the MiniCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system. MC-151 Complete system, includes the MC-101 MiniCoater, the E-310 Electronic Counter including the Proximity Sensor and 24 V Solenoid, and One Gallon Reservoir with Filter and 20 PSI Pop-Off Valve.

The FloaterCoater is the roller coater of the future for the metal stamping industry today. It is constructed of stainless steel and with rolls that float with the movement of the coil stock. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The FloaterCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does on need lubrication, thus saving on lubricant cost. Rolls are held in such a manner that they can be removed and installed in minutes. All of the features of the FloaterCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system.

The B-Coater takes the guesswork out of lubricating blanks!
Computer controlled for just the right amount of lubricant, the B-Coater eliminates spray bottles, brushes and rollers and ensures that every blank will be lubricated.
It increases the speed of production, improves die life, lowers down time, reduces rejects and saves money.

Low Pressure Air Assist Lubricant Dispensing System or Airless Lubricating Dispensing System The MeterMizer is a positive displacement pump that dispenses lubricant into a low pressure steam of air or can dispense a controlled drop of fluid, void of air, to the work area. The low pressure air carries the lubricant to the work area and delivers it as a Minimum Quantity Lubrication non-fogging spray.


The dispensing of the lubricant can be controlled with a manual OnOff valve, solenoid valve, LSP Electronic Controllers and the LSP Air Timer. It can dispense in predetermined repeatable actuations, single shots or be tied into a machine and dispense on each cycle of the machine.

Reduces Fluid Consumption
Near Dry Lubricating
Non Fogging Spray
Reduces Cost of Parts Cleanup
Keeps the Work Area Clean
Lubricant can be dispensed two ways:
with a low velocity air assist or delivered as an airless drop
Cools and extends tool life