Our Products #4977420

Magnetic chute separators are ideal for extracting ferrous tramp metal from high-volumes of dry product flowing vertically through a chute. Each unit utilizes two powerful permanent magnets, a drawer-in-housing assembly and a product flow diverter. The two magnets are mounted on opposite sides of the bottomless drawer assembly. The product flow diverter is mounted above and along the center line of the drawer in a manner parallel to the two magnets.

Magnetic drums allow automatic, continuous separation of ferrous materials and are very appropriate for the protection of breakers, ground and general machinery.
Drums are magnetized at 180C for allowing discharge of material on an ongoing basis, for the non-magnetic, even the drums have two axles and a mobile device as the axis of the drum and the other fixed axis and positioning of the magnetic circuit of the drum with a key.
Of robust construction, made of stainless steel AISI 304 or 316, depending on the needs of the installation site, the drums can work both in heated environments, dusty, humid, etc. .
Magnetic drums can be built both as ferrite magnets with Neodymium Magnets, depending on the work carried out and the installation environment.

Our Magnetic Filters and Separators are strong permanent magnetic tubes fixed onto a framework. When any substance containing iron or steel passes through the framework, the iron or steel material will attach to the wall of the tubes. Filtering these magnetic substances will protect your equipment, facilities and products.

Magnetic tubes are used for decontamination ferric, nails, screws, staples and parts ferric general, raw materials, especially in powder or granular materials, such as grains, flour, sugar, etc.
Installation is quick and simple as it is sandwiched between the pipe through which flows the raw material to be decontaminated, the casing of the bullet magnet for high magnetic power, slows the flow of material and distributes it to clean parts FERROUS raw material to be attached to the magnetic core. The cleaning of the magnetic core is very simple as this attached to the door is clean and easily accessible. Another advantage is that you do not need any kind of maintenance, so their cost is even smaller.

NdFeB, the third generation of rare-earth permanent magnet, has high remanence, high coercive force, high-energy product and high performancecost ratio.
Neodymium Magnets are easily formed into various sizes and widely used in many fields such as magnets for aviation, electronics, instruments, meters, machine and medical instruments. Neodymium metal is used extensively to produce Nd-Fe-B magnets, which have energy densities as high as 27 to 35 million gauss oersteds.
They are the most compact magnets commercially available. It is especially suitable for the development of magnets for high-performance, compact and light products.

Water Magnet Fluid Conditioners from Magnet City are easy to install and set up in minutes! There are no tools required. They are expandable to fit virutally any pipe diameter, just add more magnetic sections for larger pipes. Once you install our fluid conditioner water magnet there is nothing more to add, clean or replace (no salt, filters, screens), our magnetic fluid conditioners use no electricity and they never lose their magnetic potency.

The drawers magnetic loop, magnets are made of ferrite or neodymium. These grids are placed inside tubes or hoppers, for removing ferrous contaminants present in granules, powders and liquids. Completely built in stainless steel AISI-304 or AISI-316.
They are easy to install and no additional accessories needed for assembly. For maintenance, only stitch required manual cleaning.

Tunnel model type detectors IDG-SB01 and 02, protects the delicate machinery or reject the pollutants of any kind, causing unemployment mo- ves through the detection signaling relay and visual or acoustic devices.
The extraction of metals is performed or automated systems or manually.
The sensitivity, is regulated by potentiometer or digital is regulated from the outside with IDG-MFS equipments.
Stable equipment from vibration and high immunity to interference from the power supply and radio frequencies.
Made of steel trays, depending on where you work, the finished material can be painted or galvanized and stainless steel construction. Depending on the conveyor belt, height of the load, product to analyze different models are available.

The magnetic pulley is used for auto-parts ferric small and medium-sized, for the separation of very fine iron particles, it is preferable to the use of magnetic drum.
Captures the magnetic pulley FERROUS parts closest to the conveyor belt.
Due to its robust construction, the magnetic pulley requires no maintenance. Magnetic pulley comes complete with a sturdy stainless-steel shaft AISI 304.