Post Buy Requirement
MS
United States
Add Review

Other Products / Services

MuRoom

We design and build both modular MuRooms and Custom MuRooms based upon each customers unique application or requirements to create a low field environment. One of our specialty high permeability and high attenuation alloy materials may be specified and employed for construction; either MuMETAL Sheet with Perfection Annealing applied or our stock Co-NETIC AA Perfection Annealed Sheet.

After taking measurements of electromagnetic field (EMF) radiation generated by external sources and establishing the main source(s) of unwanted electromagnetic fields in the designated space, we will provide an efficient solution to mitigate the electro-magnetic
View Complete Details

EVALUATION PROBES

Hands-On" evaluation and sampling begins here. Using our Lab Kits, Meters & Probes, shielding can be prototyped with everyday common hand-tools, or bench- top and model-shop equipment. Layers of material from a Lab Kit can be added until the unwanted field is reduced (attenuated) to the desired level. Your prototype then serves as a production model. After prototyping, contact Magnetic Shield Corporation for a fabrication or stock material quotation.

Our Lab Kits include a variety of MuMETAL, Co-NETIC, and NETIC alloy samples for testing and evaluation. Three Lab Kit options are available.
View Complete Details

MuMETAL Zero Gauss Chambers (12)

One of our most popular research products, fabricated from MuMETAL alloy is the Magnetic Shield Corporation Zero Gauss Chamber. These scientifically engineered chambers provide a laboratory work space of extremely low magnetic field for testing and experimentation.

MuMETAL Zero Gauss Chambers have been used worldwide by many universities, private research companies, national laboratories and companies required to provide evidence of military or consumer regulatory compliance. Our chambers are preferred because they are made from high permeability () Stress Annealed MuMETAL, which provides a consistent, low field test area.
Our standard Zero Gauss Chambers consist of 3-layers and are designed
View Complete Details

Magnetic Shielding For Wiring Applications

We offer several magnetic shielding products used in electricalelectronic wiring applications such as: power feeds, aerospace, vehicle controls, test and measurement devices, audio-level interconnections, communication equipment, and hand-held devices.

Shielding: To provide effective magnetic shielding for cable and conductors such as twisted pair; and avoid pickup of external fields or radiation of interfering, unwanted fields use AA CABLE SHIELD and SPIRA-SHIELD Flexible Conduit.

Cable: Our INTER-8 Weave Cable replaces and provides substantial improvement over conventional twisted-pair cables. INTER-8 Weave Cable consists of four separate conductors braided into interlocking loops and is a field-proven design of Magnetic Shield Corporation.

Wire: We also offer our Co-NETIC AA Wire, which is used in fabrication of magnetic shielding braided sleeving to certain customer specifications where our stock
AA CABLE SHIELD may not be specified.
View Complete Details

MuMETAL Toroidal Cores

Magnetic Shield Corporation supplies custom tape-wound MuMETAL Toroidal Cores to industries requiring High Metering Accuracy (HMA) current transformer cores. By using our proprietary brand of MuMETAL and properly heat treating in a controlled hydrogen atmosphere furnace, (to a soft magnetic anneal) we maintain close control of the magnetic properties over a broad range of flux densities which permits the most economical and efficient design of your transformer.

We offer a range of custom wound cores from minimum 1 [25mm] inside diameter to maximum 47.25 [1200mm] outside diameter, using MuMETAL foil thicknesses ranging between 0.004 [0, 1mm] and 0.014
View Complete Details

MuMETAL Shielding Cans (26)

We offer a wide range of 5-sided magnetic shielding MuMETAL Cans stamped or formed in either ROUND or RECTANGULAR shapes, and deep-drawn up to a 3:1 depth ratio when necessary. Our standard stock range and custom sizes are available in thicknesses from 0.014 to 0.062 [0, 36mm to 1, 57mm thick] and made from various MuMETAL, Co-NETIC or NETIC shielding alloys depending on your exact shielding requirements. Typically, our high permeability () 80% nickel-iron MuMETAL cans are shipped as is since our AA Perfection Annealing method provides a bright nickel appearance after anneal. We do offer other finishes including plating, electro-polish, powder coating
View Complete Details

MuMETAL Round Bar (10)

MuMETAL Round Bar is primarily used for CNC machined or forged components like custom tubing, current sensors, high precision current transformer cores, ground fault circuit breaker (relay parts), or any other applications requiring precision machining, high permeability soft magnetic alloy, with a low coercive force and low losses, in the range from 0-100 kHz. Typically, atmospherically controlled Perfection Annealing is required after machining, forming, forging, or welding to provide maximum shielding performance.

Our MuMETAL Round Bar is stocked unannealed, in diameters from 0.250" to 8.17" [6, 35mm to 207, 5mm]. Custom diameters and lengths are available upon request.
View Complete Details

NETIC Foil

NETIC is a proprietary brand that is often applied in fields of high intensity (strong fields) because of its high magnetic saturation characteristics.

We stock three different types:
NETIC S3-6 is an Uncoated, high iron shielding alloy, and is prone to oxidation. Typically this alloy is painted or plated after shield fabrication.
NETIC S3-6 ET is Electro-Tin Plated and can be used as is. Both products are available as Sheet or Foil, and contain the same chemical composition and shielding efficiency.
NETIC S3-6 PST is our high iron shielding alloy with added Pressure Sensitive Tape.
For ultimate performance, NETIC is commonly used in combination (in layers) with Co-NETIC or MuMETAL. If used in combination, the NETIC layer is placed closest to the source of interference, with Co-NETIC or MuMETAL layer closest to the component being shielded. Used for either fabricated or flat shields, it may be re-annealed for better performance.
View Complete Details

EVALUATION LAB KITS

Hands-On" evaluation and sampling begins here. Using our Lab Kits, Meters & Probes, shielding can be prototyped with everyday common hand-tools, or bench- top and model-shop equipment. Layers of material from a Lab Kit can be added until the unwanted field is reduced (attenuated) to the desired level. Your prototype then serves as a production model. After prototyping, contact Magnetic Shield Corporation for a fabrication or stock material quotation.

Our Lab Kits include a variety of MuMETAL, Co-NETIC, and NETIC alloy samples for testing and evaluation. Three Lab Kit options are available.
View Complete Details

EVALUATION METERS

Hands-On" evaluation and sampling begins here. Using our Lab Kits, Meters & Probes, shielding can be prototyped with everyday common hand-tools, or bench- top and model-shop equipment. Layers of material from a Lab Kit can be added until the unwanted field is reduced (attenuated) to the desired level. Your prototype then serves as a production model. After prototyping, contact Magnetic Shield Corporation for a fabrication or stock material quotation.

Our Lab Kits include a variety of MuMETAL, Co-NETIC, and NETIC alloy samples for testing and evaluation. Three Lab Kit options are available.
View Complete Details

NETIC Sheet

NETIC is a proprietary brand that is often applied in fields of high intensity (strong fields) because of its high magnetic saturation characteristics.

We stock three different types:
NETIC S3-6 is an Uncoated, high iron shielding alloy, and is prone to oxidation. Typically this alloy is painted or plated after shield fabrication.
NETIC S3-6 ET is Electro-Tin Plated and can be used as is. Both products are available as Sheet or Foil, and contain the same chemical composition and shielding efficiency.
NETIC S3-6 PST is our high iron shielding alloy with added Pressure Sensitive Tape.
For ultimate performance, NETIC is commonly used in combination (in layers) with Co-NETIC or MuMETAL. If used in combination, the NETIC layer is placed closest to the source of interference, with Co-NETIC or MuMETAL layer closest to the component being shielded. Used for either fabricated or flat shields, it may be re-annealed for better performance.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Magnetic Shield Corporation)
  • Bensenville, IL 60106-1643 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/magnetic-shield-corporation/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0019458024{main}( ).../index.php:0
20.02942024368include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.04112747008include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.05173682712header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice