Post Buy Requirement
MT
United States
Add Review

Other Products / Services

Cordless LED Curing Light

  • Input Power: 100-240VAC, 50-60Hz, 0.8A
  • Output Power: 5.0VDC/ 3.0A +/-5%
  • Optical Wavelength: 460~480nm
The ART-L5 is ergonomically designed with a gun-shaped handle. It features 3 curing modes: Fast, Ramp, and Pulse. While the ART-L5 is a cordless device, the AC power adapter may be plugged directly into the handle allowing the ART-L5 to be used when battery power is low.

This item has been discontinued in North and South America.

Part number: L5-F-ARTB-A1-00-0

510K Registered
CE and ISO certified
View Complete Details

LED Cordless Curing Light

The red cap eye shield fits on the end of ART-L3 Pro and ART-L5 light guides. These eye shields provide minimal eye protection. Use of safety goggles is strongly advised when operating Bonart curing lights.

Part number: LD5003-001

Compatible Devices:

ART-L5
ART-L3 PRO
View Complete Details

Compact Piezoelectric Scaler

  • Power Supply: 110V*
  • Working Freq.: 26Khz ~ 32Khz
  • Water Supply: 25-60Psi (172-414kPA)
he Piper (ART-P6) is a compact piezoelectric scaler. While small, it has Auto Gain Control, which stabilizes and adjusts power settings for optimal performance.

The Piper hand piece now has an LED for enhanced visibility.

Device name: Piper

Model number: ART-P6

Part number: P6-1-BMPL-A3-40-L

CE and ISO certified
510K registered
View Complete Details

Maverick

  • M0004-292: universal internal water flow insert
  • TM0006-162: 25KHz universal external water flow insert
  • TM0004-452: 25KH slim plastic internal water flow insert
Details:

The Maverick (ART-M1) is our most basic scaler. The Maverick is available only in a 25KHz model.

Inserts (tips) are not included.

Device Name: Maverick

Model number: ART-M1

Part Number: M1-1-BMT2-A1-00-0

CE and ISO Certified
510K registered
View Complete Details

Marquee

  • Model number: Marquee
  • Device name: ART-M3II
  • Power supply: 110V ± 5% ~ 50/60 Hz 92 VA or 220V ± 5% ~ 50/60 Hz 92 VA
The Marquee (ART-M3II) is a stand-alone magnet ultrasonic scaler that features 3 modes of operation: Scaling, perio, and endo. The Marquee provides precise control and ease of use as it locks-in the frequency of installed tips for optimal performance.

Note: There are two models of the Marquee (ART-M3II) unit: One model for use with 25kHz inserts only, and a separate model for use only with 30kHz inserts.

CE and ISO Certified
510K registered
View Complete Details

Pelican

  • Device Name: Pelican Model Numbe Pelican
  • Part number: ART-P3II
  • Model Number: P3II-1-BMBL-A1-60-0
The Pelican Piezoelectric Scaler is the 2nd series of the original ART-P3 with new and improved features. The Pelican comes installed with Auto Gain Control that adjusts power settings for optimal performance, and has 3 modes of operation: Scaling, Perio, and Endo. While larger than the Piper (ART-P6), the Pelican has a built in LCD screen for displaying power settings and modes. Power and water flow are adjusted through knobs located on the front of the scaler.

The Pelican piezo hand piece now has a LED for enhanced visibility.
View Complete Details

Scooba

  • Device name: Scooba
  • Model number: ART-UC1
  • Part number: UC1-1-ART-A1-00-0
Introducing the Scooba by Bonart Co., Ltd.!

The Scooba is an ultrasonic cleaner that features a large corrosion resistant stainless steel tank that is also easy to drain. Abundant airflow around internal electronic modules prevents the unit from overheating when the tank is heated. Heat the tank from 10C to 60C and set the cleaning cycle to last as long as needed for 1 to 99 minutes.

By sending ultrasonic pulses through the water for superior cleaning power, the Scooba is ideal for cleaning and removing debris from dental instruments prior to sterilizing.
View Complete Details

Electron Electrosurgery System

  • Maximum power output: 50W (@ 400 ohm load)
  • Power Supply: 110V±5% ~50/60Hz 92VA or 220V±5% ~50/60Hz 92VA
  • Work frequency: 1.5~1.7MHz±5%
hosen by many dentists and veterinarians, the Electron (ART-E1) Electrosurgery Unit is a stand-alone device used for cutting and coagulating.
It has 10 power level settings and 3 operating modes: Cut, Coag 1, and Coag 2.

The grounding plate (included) is required for operation.

ISO and CE Certified
510k registered

Device Name: Electron

Model number: ART-E1
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Magpie Tech. Corp.)
  • La Puente, CA 91744 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/magpie-tech-corp/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457888{main}( ).../index.php:0
20.01692019320include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.04362741464include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.04953677160header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice