Post Your Requirement Menu

Welcome User

Other Products / Services

Leading Manufacturer, Supplier & Retailer of Cordless LED Curing Light, LED Cordless curing light, compact piezoelectric scaler, Maverick and marquee.

Cordless LED Curing Light

  • Input Power: 100-240VAC, 50-60Hz, 0.8A
  • Output Power: 5.0VDC/ 3.0A +/-5%
  • Optical Wavelength: 460~480nm

The ART-L5 is ergonomically designed with a gun-shaped handle. It features 3 curing modes: Fast, Ramp, and Pulse. While the ART-L5 is a cordless device, the AC power adapter may be plugged directly into the handle allowing the ART-L5 to be used when battery power is low. This item has been discontinued in North and South America. Part number: L5-F-ARTB-A1-00-0 510K Registered CE and ISO certified

View Complete Details

LED Cordless curing light

The red cap eye shield fits on the end of ART-L3 Pro and ART-L5 light guides. These eye shields provide minimal eye protection. Use of safety goggles is strongly advised when operating Bonart curing lights. Part number: LD5003-001 Compatible Devices: ART-L5 ART-L3 PRO

View Complete Details

compact piezoelectric scaler

  • Power Supply: 110V*
  • Working Freq.: 26Khz ~ 32Khz
  • Water Supply: 25-60Psi (172-414kPA)

he Piper (ART-P6) is a compact piezoelectric scaler. While small, it has Auto Gain Control, which stabilizes and adjusts power settings for optimal performance. The Piper hand piece now has an LED for enhanced visibility. Device name: Piper Model number: ART-P6 Part number: P6-1-BMPL-A3-40-L CE and ISO certified 510K registered

View Complete Details

Maverick

  • M0004-292: universal internal water flow insert
  • TM0006-162: 25KHz universal external water flow insert
  • TM0004-452: 25KH slim plastic internal water flow insert

Details: The Maverick (ART-M1) is our most basic scaler. The Maverick is available only in a 25KHz model. Inserts (tips) are not included. Device Name: Maverick Model number: ART-M1 Part Number: M1-1-BMT2-A1-00-0 CE and ISO Certified 510K registered

View Complete Details

marquee

  • Model number: Marquee
  • Device name: ART-M3II
  • Power supply: 110V ± 5% ~ 50/60 Hz 92 VA or 220V ± 5% ~ 50/60 Hz 92 VA

The Marquee (ART-M3II) is a stand-alone magnet ultrasonic scaler that features 3 modes of operation: Scaling, perio, and endo. The Marquee provides precise control and ease of use as it locks-in the frequency of installed tips for optimal performance. Note: There are two models of the Marquee (ART-M3II) unit: One model for use with 25kHz inserts only, and a separate model for use only with 30kHz inserts. CE and ISO Certified 510K registered

View Complete Details

Pelican

  • Device Name: Pelican Model Numbe Pelican
  • Part number: ART-P3II
  • Model Number: P3II-1-BMBL-A1-60-0

The Pelican Piezoelectric Scaler is the 2nd series of the original ART-P3 with new and improved features. The Pelican comes installed with Auto Gain Control that adjusts power settings for optimal performance, and has 3 modes of operation: Scaling, Perio, and Endo. While larger than the Piper (ART-P6), the Pelican has a built in LCD screen for displaying power settings and modes. Power and water flow are adjusted through knobs located on the front of the scaler. The Pelican piezo hand piece now has a LED for enhanced visibility.

View Complete Details

Scooba

  • Device name: Scooba
  • Model number: ART-UC1
  • Part number: UC1-1-ART-A1-00-0

Introducing the Scooba by Bonart Co., Ltd.! The Scooba is an ultrasonic cleaner that features a large corrosion resistant stainless steel tank that is also easy to drain. Abundant airflow around internal electronic modules prevents the unit from overheating when the tank is heated. Heat the tank from 10ºC to 60ºC and set the cleaning cycle to last as long as needed for 1 to 99 minutes. By sending ultrasonic pulses through the water for superior cleaning power, the Scooba is ideal for cleaning and removing debris from dental instruments prior to sterilizing.

View Complete Details

Electron Electrosurgery System

  • Maximum power output: 50W (@ 400 ohm load)
  • Power Supply: 110V±5% ~50/60Hz 92VA or 220V±5% ~50/60Hz 92VA
  • Work frequency: 1.5~1.7MHz±5%

hosen by many dentists and veterinarians, the Electron (ART-E1) Electrosurgery Unit is a stand-alone device used for cutting and coagulating. It has 10 power level settings and 3 operating modes: Cut, Coag 1, and Coag 2. The grounding plate (included) is required for operation. ISO and CE Certified 510k registered Device Name: Electron Model number: ART-E1

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • La Puente, CA 91744 map, United States